===================== Product Identification =====================
MSDS NAME:SUPEROX 713
NIIN:00N010427
MSDS Number: BCTSR
=== Responsible Party ===
Company:REICHHOLD CHEMICALS,INC.(REACTIVE POLYMERS DIV)
Address:8540 BAYCENTER ROAD
City:JACKSONVILLE
State:FL
ZIP:32245
Info Phone Num:904-739-2170
Emergency Phone Num:800-424-9300;904-739-2170
CAGE:1JM52
=== Contractor Identification ===
Company:REICHHOLD CHEMICALS INC (VDR-CHEM COMMOD AGY,INC)
Address:8540 BAY CENTER RD
Box:19129
City:JACKSONVILLE
State:FL
ZIP:32245
Country:US
Phone:904-739-2170, CHEMTREC 800-424-9300
CAGE:1JM52
============= Composition/Information on Ingredients =============
Name:METHYL ETHYL KETONE PEROXIDE
CAS:1338-23-4
RTECS #:EL9450000
Fraction by Wt: 20%
Other REC Limits:
OSHA PEL:
ACGIH TLV:C 0.2 PPM
EPA Rpt Qty:10 LBS
DOT Rpt Qty:10 LBS
Name:DIMETHYLPHTHALATE (SARA III)
CAS:131-11-3
RTECS #:TI1575000
Fraction by Wt: 30%
Other REC Limits:
OSHA PEL:5 MG/M3
ACGIH TLV:5 MG/M3; 9192
EPA Rpt Qty:5000 LBS
DOT Rpt Qty:5000 LBS
Name:HYDROGEN PEROXIDE (SARA III)
CAS:7722-84-1
RTECS #:MX0900000
Fraction by Wt: 2.0%
Other REC Limits:
OSHA PEL:1 PPM
ACGIH TLV:1 PPM; 9192
Name:METHYL ETHYL KETONE (2-BUTANONE) (MEK) (SARA III)
CAS:78-93-3
RTECS #:EL6475000
Fraction by Wt: 2.0%
Other REC Limits:
OSHA PEL:200 PPM/300 STEL
ACGIH TLV:200 PPM/300STEL 9192
EPA Rpt Qty:5000 LBS
DOT Rpt Qty:5000 LBS
===================== Hazards Identification =====================
LD50 LC50 Mixture:
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:SEE SIGNS & SYMPTOMS OF OVEREXPOSURE.
Explanation of Carcinogenicity:THIS PRODUCT DOES NOT CONTAIN 0.1% OR
MORE OF ANY SUBSTANCE WHICH IS LISTED AS CARC BY NTP,IARC OR
OSHA.(MFR)
Effects of Overexposure:METHYL ETHYL KETONE PEROXIDE IS HIGHLY
IRRITATING TO THE SKIN AND RESPIRATORY TRACT.EYE CONTACT MAY CAUSE
BLINDNESS.INHALATION OF FUMES OR VAPORS MAY RESULT IN
HEADACHE,DIZZINESS,SNEEZING,INCOORDINATI ON,AND CNS DEPRESSION.
Medical Cond Aggravated by Exposure:
======================= First Aid Measures =======================
First Aid:SKIN:WASH AFFECTED AREA IMMED W/ SOAP & H*2O.REMOVE CONTAM
CLOTH & SHOES & AGAIN WASH THOROUGHLY.IF SKIN IRRITATED,APPLY AN
OINTMENT SUCH AS LANOLIN.IRRIT PERSIST,CONTACT PHYS.DISCARD CONTAM
SHOES,LAU NDER CLOTH.EYES:RINSE IMMED W/ H*2O & CONT WASH FOR AT
LEAST 15 MIN.CALL PHYS AT ONCE. INHAL:REMOVE VICTIM TO WELL VENT
AREA;DIFFICULTY BREATH,GET MED ATTN AT ONCE.INGEST:DO NOT INDUCE
VOMIT(SUP DATA)
===================== Fire Fighting Measures =====================
Flash Point Method:SCC
Flash Point:>1=140F;60.C
Upper Limits:
Extinguishing Media:WATER MOST EFFECTIVE.ALSO H*2O FOG CARBON DIOXIDE &
FOAM.CAUTION-DRY CHEMICAL CAN CAUSE MEKP TO REIGNITE.
Fire Fighting Procedures:IF CONFINED IN A RIGID
CONTAINER(GLASS,METAL,THICK PLASTIC),IT COULD RUPTURE
VIOLENTLY.EXPOS TO A TEMP OF 145 F OR GREATER MAY RESULT IN VIOLENT
DECOMPOSITION.
Unusual Fire/Explosion Hazard:PERS EVAC PRIMARY.BLAZE FOUGHT FROM SAFE
DISTANCE,FROM EXPLN-PROT LOCATION.NON-BURN MAT,RELOCATE TO SAFE
AREA.H*2O SPRAY ON ALL CNTNR EXPOSED TO HEAT.(SUP DATA)
================== Accidental Release Measures ==================
Spill Release Procedures:REMOVE SOURCES OF IGNITION,COVER W/
NON-COMBUST ABSORB MAT TO CONTAIN SPILLAGE.GATHER ABSORBED MASS W/
NON-SPARK TOOLS TO A POLYETHYLENE OR POLYPROPYLENE BAG OR
CONTR,MOVE OUTDOORS.WASH AREA W/ SOAP & H*2O.MAT NOT DSPL OF
SOON,WET BAG OR CONTR,SEAL.
Neutralizing Agent:
====================== Handling and Storage ======================
Handling and Storage Precautions:STORE AWAY FROM OTHER MAT IN COOL
PLACE IN ORIGINAL CONTR & AWAY FROM SOURCE OF DIRECT
SUNLIGHT,HEAT,FLAME,SPARKS.STORE BELOW 80F.MAX STORAGE TEMP 90F
Other Precautions:DO NOT ADD TO HOT MAT & AVOID CONTAM.ONLY
GLASS,POLYPROPYLENE,TEFLON,POLYETHYLENE,CERAMIC CONTR,FUNNELS/MEAS
DEVICE USE.AVOID METAL CONTAM.NEVER ADD PROMOTERS OR PROMOTED
RESINS TO PRODUCT.CONSULT LAB EL,SPI SAFETY POSTER,PRODUCT
BULLETIN.
============= Exposure Controls/Personal Protection =============
Respiratory Protection:A CANISTER-TYPE RESPIRATOR MUST BE WORN TO
PREVENT THE INHALATION OF VAPORS WHEN THE TLV OR PEL IS
EXCEEDED(MFR).NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE FOR
EXPOSURE OF CONCERN .
Ventilation:GEN VENT IS REQUIRED DURING NORMAL USE.LOCAL VENT MAY BE
REQUIRED FOR CERTAIN OPERATIONS TO KEEP EXPOS LEVEL BELOW LIMIT
Protective Gloves:CHEM RESISTANT PLASTIC OR RUBBER.
Eye Protection:CHEM WORK GOGGLES FACESHLD OPTIONAL
Other Protective Equipment:SAFETY SHOWER AND EYE WASH FOUNTAIN MUST BE
AVAILABLE AND IN GOOD OPERATING CONDITION.
Work Hygienic Practices:OBSERVE GOOD WORK HYGIENIC PRACTICES.
Supplemental Safety and Health
UNUSUAL FIRE EXPLN HAZ:WEAR SCBA.HEAT OF DECOMP OF PEROXIDES ADDS TO
HEAT OF FIRE.DRY CHEM FIRE EXT AGENT MAY CATALYZE DECOMP.EMER FIRST
AID:DRINK LG AMTS OF MILK OR H*2O & OBTAIN IMMED MED ATTN FOR L
AVAGE (STOMACH WASH).
================== Physical/Chemical Properties ==================
Boiling Pt:B.P. Text:DECOMPOSES
Melt/Freeze Pt:M.P/F.P Text:
Decomp Temp:Decomp Text:
Vapor Pres:
Vapor Density:HEAV AIR
Spec Gravity:1.11-1.17
pH:
Evaporation Rate & Reference:SLOW THAN N-BUTYL ACETATE
Solubility in Water:
Appearance and Odor:CLEAR,COLORLESS LIQUID WITH LOW ODOR.
Percent Volatiles by Volume:NEG
Corrosion Rate:
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
METALLIC CONTAM,AMINES,ORGANIC METAL SALTS,& STRONG OXIDIZING & REDUC
AGENT,MINERAL ACID,ALKALI,PROMOTER/PROMOTED RESINS
Stability Condition to Avoid:DIRECT SUNLIGHT,HEAT ABOVE 100 F,OPEN
FLAME OR SPARKS,CONTAMINATION,PROLONGED STORAGE ABOVE 90F.
Hazardous Decomposition Products:CARBON DIOXIDE,CARBON MONOXIDE,DENSE
SMOKE AND INTENSE HEAT.
Conditions to Avoid Polymerization:
==================== Disposal Considerations ====================
Waste Disposal Methods:MAT CONTAINS MEKP,LISTED AS HAZ WASTE(NO
U160).DISPOSE OF MAT OR ITS CONTR REQUIRES COMPLY W/ APPLICABLE
LABEL,PACKAGE & RECORDKEEPING STD.FURTHER INFO,CONTACT STATE,LOCAL
OR EPA HOTLINE(800-424-9346; 202-383-3000).EPA WASTE NO DIMETHYL
PHTHALATE:U102
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|
|
| ALL PAGES On Chemical Property IN THIS GROUP
| | NAME | CAS |
|
SUPEROX 713
| 1338-23-4
131-11-3
7722-84-1
78-93-3 |
|
SUPEROX 710
| 1338-23-4
131-11-3
7722-84-1
78-93-3 |
|
BLACK MAGIC RT-20,RT-525,RT-526,RT-528
| 7783-00-8
7664-38-2
7440-50-8
7440-02-0
7732-18-5 |
|
BLACK MAGIC RT-S REPLENISHER
| 7783-00-8
7664-38-2
7440-50-8
7440-02-0
7732-18-5 |
|
METCOLITE F.
| 7429-90-5
7440-67-7
13463-67-7
60676-86-0 |
|
KLEEN-SURF, NONAEROSOL
| 67-63-0
68440-04-0
7732-18-5 |
|
DOC AEROSOL
| 75-09-2
121-54-0
71-55-6
74-98-6
75-28-5 |
|
BOND MACHINE SOLVENT #2
| 75-09-2
110-80-5 |
|
GRIP
| 7647-01-0 |
|
FORMULA 100 ICE REMOVER
| |
|
FORMULA 362 NO RINSE CLEANER/SANITIZER
| |
|
FORMULA 555 ICE CURE
| |
|
MONIQUE
| |
|
HD347B
| 14807-96-6
111-40-0 |
|
EASYPOXY SANDTONE, 3518
| 64742-88-7
1317-80-2
1333-86-4
1317-65-3 |
|
EASYPOXY GOLD, 3420
| 64742-88-7
1317-80-2
1333-86-4 |
|
EASYPOXY YELLOW, 3414
| 64742-88-7
1317-80-2
1333-86-4 |
|
EASYPOXY PINE GREEN, 3344
| 64742-88-7
1317-80-2
1333-86-4 |
|
EASYPOXY TURQUOISE, 3338
| 1317-80-2
1333-86-4
1317-65-3
64742-88-7 |
|
EASYPOXY AVOCADO 3318
| 64742-88-7
1317-80-2
1333-86-4 |
|
EASYPOXY OCEAN BLUE, 3248
| 64742-88-7
131-78-0
1333-86-4
1317-65-3 |
|
EASYPOXY ELECTRIC BLUE, 3237
| 64742-88-7
1317-80-2
1333-86-4
1317-65-3 |
|
EASYPOXY BIKINI BLUE, 3229
| 64742-88-7
1317-80-2
1333-86-4
1317-65-3 |
|
EASYPOXY BLACK, 3801
| 64742-88-7
1317-80-2
1333-86-4
1317-65-3 |
|
EASYPOXY SANDALWOOD, 3540
| 64742-88-7
1317-80-2
1333-86-4
1317-65-3 |
|
EASYPOXY PLATINUM, 3711
| 64742-88-7
1317-80-2
1333-86-4
1317-65-3 |
|
EASYPOXY SEMI GLOSS (S.G.) WHITE, 3106
| 64742-88-7
1317-80-2
1333-86-4
1317-65-3 |
|
EASYPOXY OFF WHITE, 3108
| 64742-88-7
1317-80-2
1333-86-4
1317-65-3 |
|
EASYPOXY BLUE ICE, 3213
| 64742-88-7
1317-80-2
1333-86-4
1317-65-3 |
|
TRANSLUCENT NOSKID DECK PAINT, 20
| 1330-20-7 |
|
INTERNATIONAL THINNER,5822
| 64742-95-6
71-36-3 |
|
MIL-E-1115 WHITE ENAMEL, 5326
| 8032-32-4
64-17-5
108-10-1
67-63-0 |
|
FIBERGLASS BOTTOMKOTE GREEN, 559
| 67-63-0
1317-39-1
110-80-5
108-10-1
1330-20-7
8032-32-4
64-17-5 |
|
MICRON-33 RED,462
| 56-35-9
1111-67-7
71-36-3
64742-95-6 |
|
ALKYD GLOSS ENAMEL NAVY "C",TT-E-489
| 1330-20-7
100-41-4 |
|
A9-4297 EPOXY RESIN
| 14807-96-6 |
|
CADMIUM CARBONATE
| 513-78-0 |
|
EUCO THIN COAT & CONCRETE COAT
| 14808-60-7
14808-60-7
65997-15-1
497-19-8 |
|
LUBRIPLATE CHAIN AND CABLE FLUID (AEROSOL)
| 95-50-1
71-55-6
74-98-6 |
|
ATTAGEL 50
| 8031-18-3
14808-60-7 |
|
5L 100 SERIES PART A B COMBINED (OLD)
| 25068-38-6
7440-22-4
106-89-8 |
|
ENPLATE NI 418 B
| 7681-53-0
62-56-6
1336-21-6 |
|
DELO 400 MOTOR OIL SAE 20W-20.
| |
|
UR-1092
| 78-93-3
345-78-8 |
|
INSTAPAK, CSI-5000-A
| 101-68-8 |
|
OP240
| 1336-36-3 |
|
189 0755,PHOTOTYPESETTING DEVL & REPL,PT-A
| 1310-58-3
123-31-9
7732-18-5 |
|
189 0755,PHOTOTYPESETTING DEVL & REPL,PT-B
| 64-19-7
92-43-3
7732-18-5 |
|
100 7913 PAGI-SET DEVELOPER & REPLENISHER
| 123-31-9
111-46-6
1310-73-2
7732-18-5 |
|
SUPERVAL RC DEVELOPER
| 1310-58-3
123-31-9
110-80-5
7732-18-5 |
|
|