===================== Product Identification =====================
MSDS NAME:300-66A SOLVENT
NIIN:00-264-9038
MSDS Number: BTQYJ
=== Responsible Party ===
Company:PHIBRO ENERGY USA INC
Address:500 DALLAS AVE SUITE 3200
City:HOUSTON
State:TX
ZIP:77002
Country:US
Info Phone Num:713-646-5135
Emergency Phone Num:713-923-6641,800-424-9300(CHEMTREC)
Preparer's Name:SUE BOTTOM
CAGE:0V310
=== Contractor Identification ===
Company:CHEMICAL SPECIALISTS AND DEVELOPMENT INC
Address:2210 HACKBERRY LN
Box:687
City:CONROE
State:TX
ZIP:77305
Country:US
Phone:409-756-1065
CAGE:4N760
Company:PHIBRO ENERGY USA INC
Address:500 DALLAS AVE SUITE 3200
Box:City:HOUSTON
State:TX
ZIP:77002
Country:US
Phone:713-923-6641, CHEMTREC800-424-9300
CAGE:0V310
============= Composition/Information on Ingredients =============
Name:STODDARD SOLVENT
CAS:8052-41-3
RTECS #:WJ8925000
Fraction by Wt: 86-97%
Other REC Limits:NONE RECOMMENDED
OSHA PEL:500 PPM
ACGIH TLV:100 PPM; 9394
Name:N-NONANE
CAS:111-84-2
RTECS #:RA6115000
Fraction by Wt: 1-6%
Other REC Limits:NONE RECOMMENDED
OSHA PEL:200 PPM
ACGIH TLV:200 PPM; 9394
Name:N-OCTANE
CAS:111-65-9
RTECS #:RG8400000
Fraction by Wt: 1-3%
Other REC Limits:NONE RECOMMENDED
OSHA PEL:500 PPM
ACGIH TLV:300 PPM/375STEL;9394
Name:1,2,4-TRIMETHYLBENZENE (SARA III)
CAS:95-63-6
RTECS #:DC3325000
Fraction by Wt: 1-5%
Other REC Limits:NONE RECOMMENDED
OSHA PEL:25 PPM
ACGIH TLV:25 PPM; 9394
===================== Hazards Identification =====================
LD50 LC50 Mixture:ORAL LD50 (RAT) IS UNKNOWN.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: EYES: SEVERE IRRITATION,
CONJUNCTIVITIS. SKIN: MODERATE IRRITATION. INHALATION: NASAL AND
RESPIRATORY TRACT IRRITATION, CNS EFFECTS, LOSS OF CONSCIOUSNESS,
COMA, RESPIRATORY ARREST, DEATH. INGE STION: HARMFUL/FATAL IF
SWALLOWED. CHRONIC: DERMATITIS, ANEMIA, IRREGULAR HEART RHYTHM,
BEHAVIORAL CHANGES, DEATH.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:EYES: IRRITATION. SKIN: IRRITATION, DEFATTING,
INFLAMMATION, DERMATITIS, INFECTION. HIGH PRESSURE SKIN INJECTIONS
ARE SERIOUS MEDICAL EMERGENCIES. INHALATION: IRRITATION, CNS
EFFECTS, DIZZINESS, DROWS INESS, NAUSEA, HEADACHE, CONVULSIONS,
COMA, DEATH. INGESTION: NAUSEA, VOMITING, DIARRHEA, GI UPSET,
HARMFUL CNS EFFECTS.
Medical Cond Aggravated by Exposure:PREEXISTING EYE, SKIN, HEART, CNS,
AND RESPIRATORY DISORDERS MAY BE AGGRAVATED BY EXPOSURE TO THIS
PRODUCT.
======================= First Aid Measures =======================
Eyes: FLUSH WITH LARGE AMOUMTS OF WATER. IF IRRITATION
PERSISTS GET MEDICAL ATTENTION. SKIN: REMOVE CONTAMINATED CLOTHING.
WASH AREA WITH SOAP AND WATER. IF IRRITATION PERSISTS GET MEDICAL
ATTENTION. INHALATION: MOVE TO FRESH AIR. GIVE CPRIF NOT
BREATHING. IF BREATHING DIFFICULT GIVE OXYGEN. GET MEDICAL
ATTENTION. INGESTION: DO NOT INDUCE VOMITING. GET MEDICAL
ATTENTION.
===================== Fire Fighting Measures =====================
Flash Point:105F,41C
Lower Limits:0.9
Upper Limits:6.0
Extinguishing Media:DRY CHEMICAL, FOAM, CARBON DIOXIDE. CONSULT FOAM
MANUFACTURER FOR APPROPRIATE MEDIA APPLICATION RATES/WATER FOAM
RATIO.
Fire Fighting Procedures:WEAR FIRE FIGHTING PROTECTIVE EQUIPMENT AND A
FULL FACED SELF CONTAINED BREATHING APPARATUS.COOL FIRE EXPOSED
CONTAINERS AND PROTECT PERSONNEL WITH WATER SPRAY.
Unusual Fire/Explosion Hazard:VAPORS FORM FLAMMABLE/EXPLOSIVE MIXTURES
WITH AIR AT ROOM TEMPERATURES. VAPORS MAY SPREAD TO DISTANT
IGNITION SOURCES AND FLASH BACK OR EXPLODE.
================== Accidental Release Measures ==================
Spill Release Procedures:ELIMINATE SOURCES OF IGNITION. WEAR
APPROPRIATE RESPIRATOR AND PROTECTIVE CLOTHING. STOP SOURCE OF
LEAK. DIKE TO PREVENT FROM ENTERING SEWERS, STORM DRAINS AND
NATURAL WATERWAYS. VACUUM OR PUMP TO SAL VAGE VESSEL. ABSORB
RESIDUE IN ABSORBENT MATERIAL.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
====================== Handling and Storage ======================
Handling and Storage Precautions:STORE IN CLOSED CONTAINERS IN COOL,
DRY, ISOLATED AND WELL VENTILATED AREA AWAY FROM HEAT, SOURCES OF
IGNITION, AND INCOMPATIBLE MATERIALS.
Other Precautions:USE NON-SPARKING TOOLS AND EXPLOSION PROOF EQUIPMENT.
GROUND LINES, CONTAINERS, AND OTHER EQUIPMENT USED DURING PRODUCT
TRANSFER TO REDUCE POSSIBILITY OF A STATIC INDUCED SPARK. DO NOT
TRANSFER TO ANO THER CONTAINER UNLESS PROPERLY LABELED.
============= Exposure Controls/Personal Protection =============
Respiratory Protection:IF EXPOSURE EXCEEDS OCCUPATIONAL EXPOSURE
LIMITS, USE A NIOSH/MSHA APPROVED RESPIRATOR. PROPER RESPIRATOR
SELECTION SHOULD BE BASED ON THE CONTAMINANTS, DEGREE OF POTENTIAL
EXPOSURE AND PUBLISHED RESP IRATORY PROTECTION FACTORS.
Ventilation:USE ADEQUATE, EXPLOSION-PROOF, LOCAL AND/OR MECHANICAL
(GENERAL) VENTILATION TO HOLD EXPOSURE BELOW ALLOWABLE TLV/PEL.
Protective Gloves:PROTECTIVE GLOVES TO MINIMIZE EXPOSURE.
Eye Protection:SAFETY GLASSES OR GOGGLES.
Other Protective Equipment:DO NOT WEAR CONTACT LENSES. WEAR IMPERVIOUS
CLOTHING TO MINIMIZE CONTACT. PROVIDE EYE WASH STATION AND SAFETY
SHOWER.
Work Hygienic Practices:WASH AFTER HANDLING AND BEFORE EATING,
DRINKING, OR SMOKING. LAUNDER CONTAMINATED CLOTHING BEFORE REUSE.
Supplemental Safety and Health
VESSELS AND CONFINED SPACES SHOULD BE FREED OF VAPORS BEFORE ENTERING.
AREA SHOULD BE CHECKED WITH EXPLOSIMETER AND OXYGEN METER BEFORE
ENTERING. EMPTY CONTAINERS MAY CONTAIN TOXIC, FLAMMABLE OR EXPLO
SIVE RESIDUES OR VAPORS. DO NOT CUT, GRIND, DRILL, WELD, OR REUSE
EMPTY CONTAINERS THAT CONTAINED THIS PRODUCT.
================== Physical/Chemical Properties ==================
HCC:F4
Boiling Pt:B.P. Text:310 TO 400F
Vapor Pres:0.1 PSI
Vapor Density:5.0
Spec Gravity:0.77
Solubility in Water:NEGLIGIBLE
Appearance and Odor:WATER WHITE LIQUID. MILD HYDROCARBON ODOR.
Percent Volatiles by Volume:MODERA
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS (PEROXIDE, DICHROMATE, PERMANGANATE, CHLORINE,
ETC.), STRONG ACIDS, CAUSTICS, HALOGENS.
Stability Condition to Avoid:STABLE UNDER NORMAL CONDITIONS OF USE.
AVOID HIGH HEAT, OPEN FLAMES AND OTHER SOURCES OF IGNITION.
Hazardous Decomposition Products:CARBON MONOXIDE, CARBON DIOXIDE,
REACTIVE HYDROCARBONS (ALDEHYDES, AROMATICS, ETC.).
Conditions to Avoid Polymerization:WILL NOT OCCUR.
==================== Disposal Considerations ====================
Waste Disposal Methods:DISPOSE OF WASTE IN ACCORDANCE WITH LOCAL, STATE
AND FEDERAL REGULATIONS. CONTACT FIRE AUTHORITIES AND APPROPRIATE
FEDERAL, STATE AND LOCAL AGENCIES. IF SPILL IS MADE INTO NAVIGABLE
WATERS OR SHORELIN ES, NOTIFY NATIONAL RESPONSE CENTER,
800-424-8802.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|
|