===================== Product Identification =====================
MSDS NAME:UNIVOLT N 61, (ELECTRICAL INSULATING OIL FOR TRANSFORMER)
NIIN:01-216-1836
MSDS Number: BTTVD
=== Responsible Party ===
Company:EXXON COMPANY, USA, A DIV OF EXXON CORP.
Address:800 BELL ST
Box:2180
City:HOUSTON
State:TX
ZIP:77252-2180
Country:US
Info Phone Num:713-656-5949
Emergency Phone Num:713-656-3424/2443 (MEDICAL)
Preparer's Name:NONE
CAGE:DO850
=== Contractor Identification ===
Company:EXXON COMPANY U.S.A.
Box:2180
City:HOUSTON
State:TX
ZIP:77252-2180
Country:US
Phone:713-656-5949 / 713-656-3424
CAGE:29700
Company:EXXON COMPANY, USA, A DIV OF EXXON CORP.
Address:800 BELL ST
Box:2180
City:HOUSTON
State:TX
ZIP:77252-2180
Country:US
Phone:713-656-5949 FAX: 713-656-3631
CAGE:DO850
Company:GENERAL ELECTRIC MEDICAL SYSTEMS GROUP
CAGE:1V332
============= Composition/Information on Ingredients =============
Name:HYDROTREATED LIGHT NAPHTHANIC DISTILLATE, PETROLEUM
CAS:64742-53-6
RTECS #:PY8036000
Fraction by Wt: 100%
Other REC Limits:NONE RECOMMENDED
OSHA PEL:5 MG/M3 (OIL MIST)
ACGIH TLV:5 MG/M3 (MIST) 9394
===================== Hazards Identification =====================
LD50 LC50 Mixture:ORAL LD50 (RAT) IS >5 GMS/KG.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: EYES: IRRITATION. SKIN:
PROLONGED OR REPEATED CONTACT MAY CAUSE IRRITATION. INHALATION:
ASPIRATED INTO LUNGS MAY CAUSE PULMONARY INJURY AND POSSIBLY DEATH.
INGESTION: PRODUCT HAS LOW ORDER OF A CUTE ORAL TOXICITY. CHRONIC:
PROLONGED OR REPEATED SKIN CONTACT REMOVES SKIN OILS LEADING TO
IRRITATION AND DERMATITIS.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:EYES: IRRITATION. SKIN: IRRITATION, DEFATTING,
DERMATITIS. INHALATION: ASPIRATED INTO LUNGS DURING INGESTION OR
VOMITING MAY CAUSE MILD TO SEVERE PULMONARY INJURY AND POSSIBLY
DEATH. INGESTION: PRODUC T HAS A LOW ORDER OF ACUTE TOXICITY.
Medical Cond Aggravated by Exposure:NONE RECOGNIZED.
======================= First Aid Measures =======================
Eyes: FLUSH WITH LARGE AMOUNTS OF WATER. IF IRRITATION
PERSISTS, GET MEDICAL ATTENTION. SKIN: REMOVE CONTAMINATED
CLOTHING. WASH SKIN WITH SOAP AND WATER. INHALATION: NOT NORMALLY A
PROBLEM DUE TO LOW VAPOR PRESSURE. IF OVERCOME BY VAPOR FROM HOT
PRODUCT, MOVE TO FRESH AIR AND RESTORE NORMAL BREATHING. GET
MEDICAL ATTENTION, IF NEEDED. INGESTION: DO NOT INDUCE VOMITING.
GET MEDICAL ATTENTION.
===================== Fire Fighting Measures =====================
Flash Point Method:COC
Flash Point:293F,145C
Lower Limits:0.9
Upper Limits:7
Extinguishing Media:FOAM, DRY CHEMICAL, CARBON DIOXIDE, WATER SPRAY OR
FOG, VAPORIZING LIQUID TYPE EXTINGUISHING AGENTS.
Fire Fighting Procedures:USE WATER TO KEEP FIRE-EXPOSED CONTAINERS
COOL. IF LEAK OR SPILL HAS NOT IGNITED, USE WATER SPRAY TO DISPERSE
VAPORS AND PROTECT PERSONNEL.
Unusual Fire/Explosion Hazard:USE SUPPLIED-AIR BREATHING EQUIPMENT FOR
ENCLOSED SPACES OR AS OTHERWISE NEEDED. DO NOT STORE OR MIX OIL
WITH STRONG OXIDANTS.
================== Accidental Release Measures ==================
Spill Release Procedures:RECOVER FREE PRODUCT. ADD SAND, EARTH, OR
OTHER SUITABLE ABSORBENT TO SPILL AREA. KEEP PRODUCT OUT OF SEWERS
AND WATERCOURSES BY DIKING OR IMPOUNDING. ADVISE AUTHORITIES IF
PRODUCT HAS ENTERED OR MAY ENTER SEWERS, WATERCOURSES, EXTENSIVE
LAND AREAS.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
====================== Handling and Storage ======================
Handling and Storage Precautions:KEEP CONTAINERS CLOSED WHEN NOT IN
USE. DO NOT STORE NEAR HEAT, SPARKS, FLAME, STRONG OXIDANTS. NO
SMOKING OR OPEN LIGHTS.
Other Precautions:IN ORDER TO PREVENT FIRE OR EXPLOSION HAZARDS, USE
APPROPRIATE EQUIPMENT. MINIMIZE BREATHING VAPOR, MIST, OR FUMES.
AVOID PROLONGED OR REPEATED CONTACT WITH SKIN. CLEANSE SKIN
THOROUGHLY AFTER CONTACT ,BEFORE BREAKS,MEALS,END OF WORK PERIOD.
============= Exposure Controls/Personal Protection =============
Respiratory Protection:NONE NORMALLY REQUIRED. USE SUPPLIED-AIR
RESPIRATORY PROTECTION IN CONFINED OR ENCLOSED SPACES, IF NEEDED.
Ventilation:PROVIDE SUFFICIENT VENTILATION TO PREVENT EXCEEDING
RECOMMENDED EXPOSURE LIMIT OR BUILDUP OF EXPLOSIVE CONCENTRATIONS.
Protective Gloves:USE CHEMICAL-RESISTANT GLOVES,IF NEEDED.
Eye Protection:GOGGLES/FACE SHIELD IF CONTACT MAY OCCUR
Other Protective Equipment:NONE NORMALLY REQUIRED.USE
CHEMICAL-RESISTANT APRON/OTHER IMPERVIOUS CLOTHING,IF NEEDED TO
AVOID CONTAMINATING CLOTHING.
Work Hygienic Practices:WASH AFTER HANDLING AND BEFORE EATING,
DRINKING, OR SMOKING. LAUNDER CONTAMINATED CLOTHING BEFORE REUSE.
Supplemental Safety and Health
THIS PRODUCT DOES NOT CONTAIN POLYCHLORINATED BIPHENYLS (PCB'S) AS PER
ASTM D 4059. THIS NSN IS FOR AN ELECTRICAL TRANSFORMER THAT IS
MANUFACTURED IN THE USA. THIS MSDS DATA IS FOR THE ELECTRICAL INSU
LATING OIL IN THE TRANSFORMER.
================== Physical/Chemical Properties ==================
HCC:N1
Boiling Pt:B.P. Text:460F,238C
Melt/Freeze Pt:M.P/F.P Text:-50F,-46C
Vapor Pres:<0.01
Vapor Density:>5
Spec Gravity:0.88
Viscosity:55 SSU
Evaporation Rate & Reference:<0.01 (N-BUTYL ACETATE=1)
Solubility in Water:NEGLIGIBLE
Appearance and Odor:WATER WHITE COLORED LIQUID. MILD, BLAND PETROLEUM
ODOR.
Percent Volatiles by Volume:NEG.
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
AVOID CONTACT WITH STRONG OXIDANTS SUCH AS LIQUID CHLORINE,CONCENTRATED
OXYGEN,SODIUM HYPOCHLORITE,CALCIUM HYPOCHLORITE.
Stability Condition to Avoid:HIGH TEMPERATURES AND OPEN FLAMES. WILL
NOT REACT VIOLENTLY WITH WATER.
Hazardous Decomposition Products:FUMES, SMOKE, CARBON MONOXIDE, SULFUR
OXIDES, ALDEHYDES, OTHER DECOMPOSITION PRODUCTS, IN CASE OF
INCOMPLETE COMBUSTION.
Conditions to Avoid Polymerization:WILL NOT OCCUR.
==================== Disposal Considerations ====================
Waste Disposal Methods:DISPOSE OF WASTE IN ACCORDANCE WITH LOCAL, STATE
AND FEDERAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|
|