| MSDS | : | GROUP B, SHIELDED METAL ARC WELDING (SMAW) (SUPDAT) | | CAS | : | 7439-89-6
7439-96-5
13463-67-7
7789-75-5
1312-76-1
1344-09-8 | | NAME | : | ing 14:&/or darker shade number (fdp n). provide prot
other prot equip:elec shock. see ansi z49.1. this may
ing 16:well as dark substantial clothing.
eye prot:filter lens. as a rule of thumb begin w/shade
iron
manganese (sara iii)
titanium oxide
calcium fluoride; (fluorspar)
potassium silicate
sodium silicate
supdat:potassium. may have fluorides present. gaseous rxn
ing 7:& nitrogen oxides may be formed by radiation from the
efts of overexp:muscular weak, tremors similar to
ing 9:handwriting may also appear. arc rays can injure eyes
first aid proc:should get quarterly medical exams for early
other prec:important addnl info. ansi z49.1 aws, p.o. box
ing 12:dept of labor, washington, d.c. 20210.
|
| |
|
|
===================== Product Identification =====================
MSDS NAME:GROUP B, SHIELDED METAL ARC WELDING (SMAW) (SUPDAT)
NIIN:00N049936
MSDS Number: BVDPS
=== Responsible Party ===
Company:COREX INC
Address:8585 INDUSTRY PARK DR
City:PIQUA
State:OH
ZIP:45356
Country:US
Info Phone Num:513-778-8242
Emergency Phone Num:513-778-8242
CAGE:CXREX
=== Contractor Identification ===
Company:COREX INC
Address:8585 INDUSTRY PARK DR
Box:City:PIQUA
State:OH
ZIP:45356
Country:US
Phone:513-778-8242
CAGE:CXREX
============= Composition/Information on Ingredients =============
Name:ING 14:&/OR DARKER SHADE NUMBER (FDP N). PROVIDE PROT
SCREENS & FLASH GOGGLES, IF NEC, TO SHIELD OTHERS.
RTECS #:9999999ZZ
Name:OTHER PROT EQUIP:ELEC SHOCK. SEE ANSI Z49.1. THIS MAY
INCLUDE ARM PROTECTORS, APRONS, HATS, SHOULDER PROT, AS (ING 17)
RTECS #:9999999ZZ
Name:ING 16:WELL AS DARK SUBSTANTIAL CLOTHING.
RTECS #:9999999ZZ
Name:EYE PROT:FILTER LENS. AS A RULE OF THUMB BEGIN W/SHADE
NUMBER 14. ADJUST IF NEEDED BY SELECTING NEXT LIGHTER (ING 15)
RTECS #:9999999ZZ
Name:IRON
CAS:7439-89-6
RTECS #:NO4565500
Fraction by Wt: 70-90%
OSHA PEL:N/K
ACGIH TLV:N/K
Name:MANGANESE (SARA III)
CAS:7439-96-5
RTECS #:OO9275000
Fraction by Wt: <2%
OSHA PEL:5 MG/M3 DUST, C
ACGIH TLV:5 MG/M3 DUST
Name:TITANIUM OXIDE
CAS:13463-67-7
RTECS #:XR2275000
Fraction by Wt: <5%
OSHA PEL:15 MG/M3 TDUST
ACGIH TLV:10 MG/M3 TDUST
Name:CALCIUM FLUORIDE; (FLUORSPAR)
CAS:7789-75-5
RTECS #:EW1760000
Fraction by Wt: 1-8%
OSHA PEL:2.5 MG/M3
ACGIH TLV:2.5 MG/M3
Name:POTASSIUM SILICATE
CAS:1312-76-1
Fraction by Wt: 2-6%
OSHA PEL:N/K
ACGIH TLV:N/K
Name:SODIUM SILICATE
CAS:1344-09-8
Fraction by Wt: 1-4%
OSHA PEL:N/K
ACGIH TLV:N/K
Name:SUPDAT:POTASSIUM. MAY HAVE FLUORIDES PRESENT. GASEOUS RXN
PRODS MAY INCL CARBON MONOXIDE & CARBON DIOXIDE. OZONE (ING 8)
RTECS #:9999999ZZ
Name:ING 7:& NITROGEN OXIDES MAY BE FORMED BY RADIATION FROM THE
ARC.
RTECS #:9999999ZZ
Name:EFTS OF OVEREXP:MUSCULAR WEAK, TREMORS SIMILAR TO
PARKINSON'S DISEASE. BEHAVIORAL CHANGES & CHANGES IN (ING 10)
RTECS #:9999999ZZ
Name:ING 9:HANDWRITING MAY ALSO APPEAR. ARC RAYS CAN INJURE EYES
& BURN SKIN. ELEC SHOCK CAN KILL.
RTECS #:9999999ZZ
Name:FIRST AID PROC:SHOULD GET QUARTERLY MEDICAL EXAMS FOR EARLY
DETECTION OF MANGANISM.
RTECS #:9999999ZZ
Name:OTHER PREC:IMPORTANT ADDNL INFO. ANSI Z49.1 AWS, P.O. BOX
351040, MIAMI, FL 33135 - OSHA (29 CFR 1910), U.S.(ING 13)
RTECS #:9999999ZZ
Name:ING 12:DEPT OF LABOR, WASHINGTON, D.C. 20210.
RTECS #:9999999ZZ
===================== Hazards Identification =====================
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ELECTRIC ARC WELDING MAY CREATE
ONE/MORE OF FOLLOWING HLTH HAZS. FUMES & GASES CAN BE DANGEROUS TO
YOUR HLTH. ACUTE:SHORT-TERM OVEREXP TO WELDING FUMES MAY RSLT IN
DISCOMFORT SUCH AS DIZZ, NAUS, OR DR YNESS/IRRIT OF NOSE,
THROAT/EYES. FLUORIDE CMPDS EVOLVED MAY CAUSE SKIN & EYE BURNS,
PULM EDEMA BRONCH.(EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLTH HAZ:CHRONIC:LONG TERM OVEREXP TO IRON
FUMES CAN CAUSE DEPOSITS OF IRON IN LUNG. THIS CNDTN IS CALLED
"SIDEROSIS". LUNGS WILL CLEAR IN TIME WHEN EXPOS TO IRON & ITS
CMPDS CEASES. REPEATED OVEREXP TO FLUORIDE CAN CAUSE SERIOUS BONE
EROSION. LONG TERM OVEREXP TO MANGANESE CMPDS MAY AFFECT CNS. SYMPS
INCL (ING 9)
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
======================= First Aid Measures =======================
First Aid:CALL FOR MED AID. EMPLOY FIRST AID TECHNIQUES REC BY AMER RED
CROSS. INGEST:CALL MD IMMED . INHAL:REMOVE FROM OVEREXP & APPLY
ARTF RESP IF NEEDED. EYES:WASH W/WATER FOR AT LST 15 MINS TO REMOVE
DUSTS. IF IRRIT/FLASH BURNS DEVELOP AFTER EXPOS, CONSULT MD.
SKIN:WASH W/WATER TO REMOVE DUSTS. IF IRRIT/FLASH BURNS DEVELOP
AFTER EXPOS, CONSULT MD. NOTE:EMPLOYEES EXPOS TO MANGANESE CMPDS
(ING 11)
===================== Fire Fighting Measures =====================
Flash Point:NON FLAMMABLE
Extinguishing Media:MEDIA SUITABLE FOR SURROUNDING FIRE .
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA & FULL PROTECTIVE
EQUIPMENT .
Unusual Fire/Explosion Hazard:WELDING ARC & SPARKS CAN IGNITE
COMBUSTIBLES. SEE ANSI Z49.1.
================== Accidental Release Measures ==================
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
====================== Handling and Storage ======================
Handling and Storage Precautions:TRAIN WELDER TO KEEP HIS HEAD OUT OF
FUMES. TRAIN WELDER NOT TO TOUCH LIVE ELEC PARTS & TO INSULATE
HIMSELF FROM WORK & GROUND. ALWAYS USE EXHST VENT.
Other Precautions:READ & UNDERSTAND MFR'S INSTRUCTIONS & PREC LBL ON
PROD. MAINTAIN EXPOS BELOW PEL/TLV. USE INDUS HYGIENE MONITORING TO
ENSURE THAT YOUR USE OF THIS MATL DOES NOT CREATE EXPOS WHICH
EXCEED PEL/TLV. REF ER TO FOLLOWING SOURCES FOR (ING 12)
============= Exposure Controls/Personal Protection =============
Respiratory Protection:USE NIOSH/MSHA APPROVED OR EQUIVALENT FUME
RESPIRATOR OR AIR SUPPLIED RESPIRATOR WHEN WELDING IN CONFINED
SPACE OR WHERE LOCAL EXHAUST OR VENT DOES NOT KEEP EXPOSURE BELOW
TLV.
Ventilation:USE ENOUGH VENT, LOC EXHST AT ARC, OR BOTH, TO KEEP FUMES &
GASES BELOW TLV'S IN WORKER'S BRTHG ZONE & GENERAL AREA.
Protective Gloves:WELDER'S GLOVES.
Eye Protection:ANSI APPROVD HELMET & FCSHLD W/(ING 14)
Other Protective Equipment:EMER EYE WASH & DELUGE SHOWER . WEAR HAND,
HEAD & BODY PROT WHICH HELP TO PVNT INJURY FROM RADIA, SPKS & (ING
16)
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
MFR'S TRADE NAME/PART NO:LOW HYDROGEN CARBON STEEL. HAZ DECOMP
PROD:COATINGS, NUMBER OF WORKERS, QUALITY & AMT OF VENT, CONTAMS IN
ATM. FUMES & GASES MAY VARY IN FORM & PERCENT FROM INGS LISTED.
REAS EXPECTED CONSTITUENTS OF FUME WOULD INCL:COMPLEX OXIDES OF
IRON, MANGANESE, SILICON, TITANIUM, SODIUM & (ING 7)
================== Physical/Chemical Properties ==================
Appearance and Odor:NONE SPECIFIED BY MANUFACTURER.
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
NONE SPECIFIED BY MANUFACTURER.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:COMPOSITION & QTY OF FUMES & GASES ARE
DEPENDENT UPON METAL BEING WELDED, PROCESS, PROC, ELECTRODES USED,
(SUPDAT)
==================== Disposal Considerations ====================
Waste Disposal Methods:PREVENT WASTE FROM CONTAMINATING SURROUNDING
ENVIRONMENT. DISCARD ANY PRODUCT, RESIDUE, DISPOSABLE CONTAINER OR
LINER IN ENVIRONMENTALLY ACCEPTABLE MANNER, IN FULL COMPLIANCE
W/FEDERAL, STATE & LOCAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|
|
| ALL PAGES On Chemical Property IN THIS GROUP
| | NAME | CAS |
|
SPRAY INK, AS-BL
| 106-97-8
75-28-5
8006-39-1
123-86-4
108-88-3
1330-20-7
67-64-1
74-98-6 |
|
SPRAY INK, AS-G
| 8006-39-1
123-86-4
108-88-3
1330-20-7
67-64-1
74-98-6
75-28-5
106-97-8 |
|
REPRO CHEM, FUSER OIL, 1689991
| 63148-62-9 |
|
REPRO CHEM, FUSER OIL, 1689990
| 63148-62-9 |
|
REPRO CHEM, FUSER OIL, 1669119
| 63148-62-9 |
|
CESIUM MONOCHLORIDE, CX0625
| 7647-17-8 |
|
CESIUM MONOCHLORIDE, CX0625MB
| 7647-17-8 |
|
CESIUM MONOCHLORIDE, 2039
| 7647-17-8 |
|
HANDY OIL 15, CPS 226806
| 64742-53-6
64742-54-7
64741-97-5 |
|
P-34 CHEMICAL TREATMENT (RUST-GARD)
| 10124-56-8 |
|
VACCUM LUBRICANT WAX
| |
|
WELDBOND UNIVERSAL SPACE AGE ADHESIVE
| 7732-18-5 |
|
WS-7 TABLE ADHESIVE, 500-68
| |
|
ZEP CARPET ANTIFOAM, 1294
| |
|
MOTOR OIL 30, 52033
| 64742-54-7
64742-70-7
64742-18-3 |
|
HYDRAULIC OIL 1457-H
| 64742-52-5
7440-66-6
7723-14-0 |
|
703B GEN PURPOSE CLNR 5-G
| 127-18-4
71-55-6 |
|
876 STEAM DISTILLED WOOD TURPENTINE
| 5989-27-5
8006-64-2 |
|
TUNG OIL/CHINAWOOD OIL
| |
|
CAR WASH T-78
| |
|
HEAVY DUTY RUBBING COMPOUND, T-230
| 64742-53-6
1310-73-2 |
|
THINNER, WO-163
| 71-55-6 |
|
PROCARE ULTRAKIND GENTLE WASH
| |
|
GREASE KICKER
| 111-76-2
6834-92-0
1310-73-2 |
|
40-3100 UNIWAX
| |
|
NIGROSIN WATER SOLUBLE, N4754
| 8005-03-6 |
|
MOPPAC LITE 1804
| 7732-18-5
26027-38-3
107-98-2
34590-94-8
67-63-0 |
|
WATER-BASED SPRAY PAINT, AS522
| 111-76-2
71-36-3
67-63-0
121-44-8
115-10-6 |
|
CHERRY D-O
| |
|
TONER FOR CANON, 57006
| 1309-38-2
9003-07-4
7631-86-9 |
|
TONER FOR CANON, 57301
| 1309-38-2
9003-07-4
7631-86-9 |
|
TONER FOR CANON, 57325
| 1309-38-2
9003-07-4
7631-86-9 |
|
TONER FOR CANON, 57399
| 1309-38-2
9003-07-4
7631-86-9 |
|
SODIUM LAURYL SULFATE
| 151-21-3 |
|
PALLADIUM
| 7440-05-3 |
|
121-34, CUTTER UNSCENTED INSECT REPELLENT (SUPDAT)
| 64-17-5
134-62-3
2728-05-4
2728-04-3 |
|
IND HAMMER FINISH BLUE, 24AG017
| 1330-20-7
7429-90-5
8052-41-3 |
|
AQUA-SATIN LATEX ENAMEL MIDTONE BASE
| 13463-67-7
14808-60-7 |
|
SILVALOY A-50
| 7440-50-8
7440-22-4
7440-66-6 |
|
SILVALOY A-50N
| 7440-22-4
7440-50-8
7440-66-6
7440-02-0 |
|
SILVALOY O
| 7440-50-8
7723-14-0 |
|
TURP-SUB, 1145
| 8002-09-3
8052-41-3 |
|
TURP-SUB, 1146
| 8052-41-3
8002-09-3 |
|
TONER FOR CANON, 57002
| 1309-38-2
9003-07-4
7631-86-9 |
|
GROUP A, SHIELDED METAL ARC WELDING (SMAW) (SUPDAT)
| 7439-89-6
7439-96-5
13463-67-7
1312-76-1
1344-09-8 |
|
GROUP B, SHIELDED METAL ARC WELDING (SMAW) (SUPDAT)
| 7439-89-6
7439-96-5
13463-67-7
7789-75-5
1312-76-1
1344-09-8 |
|
GROUP C, SHIELDED METAL ARC WELDING (SMAW) (SUPDAT)
| 7439-89-6
7439-96-5
7440-02-0
7440-47-3
7789-75-5
13463-67-7
1312-76-1
1344-09-8 |
|
P358 PINECAR GRAPHITE W/MOLYBDENUM
| 7782-42-5
7631-86-9 |
|
HL651 HOB-E-LUBE
| 7631-86-9
7782-42-5 |
|
CAPILLARY INKS, SERIES 1
| 107-21-1
56-81-5
8005-03-6
108-95-2 |
|
|