===================== Product Identification =====================
MSDS NAME:7159 COATED HIGH ALLOY ELECTRODES
NIIN:00-165-4179
MSDS Number: BVGHH
=== Responsible Party ===
Company:STOODY CO
Address:5557 NASHVILLE RD
Box:9997
City:BOWLING GREEN
State:KY
ZIP:42102-4997
Country:US
Info Phone Num:502-781-9777
Emergency Phone Num:502-781-9777
CAGE:57965
=== Contractor Identification ===
Company:STOODY CO
Box:90032
City:BOWLING GREEN
State:KY
ZIP:42102-9032
Country:US
Phone:502-781-9777
CAGE:57965
============= Composition/Information on Ingredients =============
Name:MANGANESE (SARA III)
CAS:7439-96-5
RTECS #:OO9275000
Fraction by Wt: 0-5%
Other REC Limits:NONE RECOMMENDED
OSHA PEL:C 5 MG/M3 DUST
ACGIH TLV:5 MG/M3 DUST 9394
Name:SILICON
CAS:7440-21-3
RTECS #:VW0400000
Fraction by Wt: 0-5%
Other REC Limits:NONE RECOMMENDED
OSHA PEL:15 MG/M3 TDUST
ACGIH TLV:10 MG/M3 TDUST; 9394
Name:CHROMIUM (SARA III)
CAS:7440-47-3
RTECS #:GB4200000
Fraction by Wt: 10-30%
Other REC Limits:NONE RECOMMENDED
OSHA PEL:1 MG/M3
ACGIH TLV:0.5 MG/M3; 9394
EPA Rpt Qty:1 LB
DOT Rpt Qty:1 LB
Name:NICKEL (SARA III)
CAS:7440-02-0
RTECS #:QR5950000
Fraction by Wt: 0-1%
Other REC Limits:NONE RECOMMENDED
OSHA PEL:1 MG/M3
ACGIH TLV:1 MG/M3; 9394
Name:MOLYBDENUM (INSOLUBLE COMPOUNDS)
CAS:7439-98-7
RTECS #:QA4680000
Fraction by Wt: 0-3%
Other REC Limits:NONE RECOMMENDED
OSHA PEL:15 MG/M3 TDUST
ACGIH TLV:10 MG/M3; 9394
Name:IRON
CAS:7439-89-6
RTECS #:NO4565500
Fraction by Wt: 45-80%
Other REC Limits:NONE RECOMMENDED
Name:TITANIUM DIOXIDE
CAS:13463-67-7
RTECS #:XR2275000
Fraction by Wt: 0-5%
Other REC Limits:NONE RECOMMENDED
OSHA PEL:15 MG/M3 TDUST
ACGIH TLV:10 MG/M3 TDUST; 9394
Name:CALCIUM FLUORIDE (AS F)
CAS:7789-75-5
RTECS #:EW1760000
Fraction by Wt: 0-1%
Other REC Limits:NONE RECOMMENDED
Name:CALCIUM CARBONATE (MARBLE) (LIMESTONE)
CAS:1317-65-3
RTECS #:EV9580000
Fraction by Wt: 0-4%
Other REC Limits:NONE RECOMMENDED
OSHA PEL:15 MG/M3 TDUST
ACGIH TLV:10 MG/M3 TDUST; 9394
Name:GRAPHITE, NATURAL
CAS:7782-42-5
RTECS #:MD9659600
Fraction by Wt: 0-3%
Other REC Limits:NONE RECOMMENDED
OSHA PEL:15 MPPCF; Z-3
ACGIH TLV:2 MG/M3 RDUST; 9394
===================== Hazards Identification =====================
LD50 LC50 Mixture:UNCLASSIFIED WELDING FUMES=5MG/M3 PEL
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:SHORT TERM EXPOSURE TO WELDING FUMES,
GASES OR DUST MAY RESULT IN DISCOMFORT SUCH AS DIZZINESS, NAUSEA,
FEVER, DRYNESS AND/OR IRRITATION OF NOSE, THROAT AND EYES. SKIN
SENSITIVITY MAY ALSO BE NOTED. A CUTE EXPOSURE FROM SOME TOXIC
GASES MAYCAUSE PULMONARY EDEMA, ASPHYXIATION AND EXCESSIVE EXPOSURE
CAN BE FATAL.
Explanation of Carcinogenicity:NICKEL AND CHROMIUM ARE CONSIDERED
POSSIBLE CARCINOGENS UNDER OSHA. RESPIRATORY CANCER FROM WELDING IS
UNCONFIRMED.
Effects of Overexposure:EXPOSURE TO WELDING FUMES MAY RESULT IN
DISCOMFORT SUCH AS DIZZINESS, NAUSEA, FEVER, DRYNESS AND/OR
IRRITATION OF NOSE, THROAT AND EYES. SKIN SENSITIVITY MAY ALSO BE
NOTED. WATERY EYES, HEADACHE, BREA THING DIFFICULTY, FREQUENT
COUGHING AND/OR CHEST PAINS MAY OCCUR FROM ACUTE EXPOSURE. TOXIC
GASES CAN BE FATAL.
Medical Cond Aggravated by Exposure:SOME WORKERS MAY BE AFFECTED BY A
PRE-EXISTING CONDITION OR OTHER OCCUPATIONAL ILLNESS BECAUSE OF THE
WIDE VARIATION IN INDIVIDUAL SUSCEPTIBILITIES.
======================= First Aid Measures =======================
First Aid:IN CASE OF ELECTRICAL SHOCK, TURN OFF POWER PRIOR TO REMOVAL
FROM EXPOSURE AREA AND ADMINISTRATION OF FIRST AID. REMOVE FROM
EXPOSURE AREA AND CALL FOR MEDICAL AID. ADMINISTER OXYGEN IF
BREATHING IS D IFFICULT. IF NOT BREATHING, BEGIN ARTIFICIAL
RESPIRATION. IF NO DETECTABLE PULSE, BEGIN EXTERNAL HEART MASSAGE.
EMPLOY FIRST AID TECHNIQUES RECOMMENDED BY THE AMERICAN RED CROSS.
===================== Fire Fighting Measures =====================
Extinguishing Media:NONFLAMMABLE. USE SAND OR REFER TO ANS Z49.1 FOR
FIRE PREVENTION DURING WELDING.
Fire Fighting Procedures:WEAR FIRE FIGHTING PROTECTIVE EQUIPMENT AND A
FULL FACED SELF CONTAINED BREATHING APPARATUS. COOL FIRE EXPOSED
CONTAINERS WITH WATER SPRAY.
Unusual Fire/Explosion Hazard:COMBUSTION OR HEAT OF FIRE MAY PRODUCE
HAZARDOUS DECOMPOSITION PRODUCTS AND VAPORS.
================== Accidental Release Measures ==================
Spill Release Procedures:CLEAN UP ANY GRINDING DUST OR WASTE RESIDUES
AND PLACE IN SUITABLE DOT APPROVED CONTAINERS AND DISPOSE OF IN
FULL COMPLIANCE WITH FEDERAL, STATE AND LOCAL REGULATIONS. AVOID
INHALATION AND SKIN EXPOSU RE.
====================== Handling and Storage ======================
Handling and Storage Precautions:WEAR GLOVES AND FLAME RETARDANT
CLOTHING WHEN CUTTING, GRINDING OR WELDING. DO NOT EXPOSE SKIN TO
RADIATION WHEN HOT CUTTING OR WELDING.
Other Precautions:PROVIDE PROTECTIVE SCREENS TO SHIELD OTHERS. WHEN
ELECTRODES AND FLUXES ARE CONSUMED, THE FUME AND GAS DECOMPOSITION
PRODUCTS GENERATED ARE DIFFERENT IN FORM FROM THE INGREDIENTS
LISTED. NEW COMPOUNDS NOT IN THE ELECTRODES MAY FORM.
============= Exposure Controls/Personal Protection =============
Respiratory Protection:USE WELD FUME RESPIRATOR OR AIR SUPPLIED
RESPIRATOR WHEN CUTTING, GRINDING OR WELDING IN A CONFINED SPACE OR
WHERE LOCAL EXHAUST OR GENERAL VENTILATION DOES NOT KEEP EXPOSURE
BELOW RECOMMENDED LIMITS. USE ONLY NIOSH APPROVED RESPIRATORS.
Ventilation:USE ENOUGH VENTILATION WHEN CUTTING, GRINDING OR WELDING TO
KEEP THE DUST, FUMES & GASES FROM THE WORKERS BREATHING ZONE
Protective Gloves:WELDERS LEATHER GLOVES
Eye Protection:OSHA APPROVED GOGGLES/FACE SHIELD W/LENS
Other Protective Equipment:FLAME RETARDANT CLOTHING WHEN CUTTING,
GRINDING OR WELDING. DO NOT EXPOSE SKIN TO RADIATION WHEN HOT
CUTTING OR WELDING.
Work Hygienic Practices:WASH THOROUGHLY BEFORE EATING OR SMOKING.
LAUNDER CONTAMINATIED CLOTHING BEFORE REUSE.
Supplemental Safety and Health
WELDING AND HOT CUTTING FUMES & GASES CANNOT BE CLASSIFIED SIMPLY.
THEIR COMPOSITION AND QUANTITY ARE DEPENDENT ON THE METAL BEING
WELDED, THE PROCEDURES, PROCESSES AND THE TYPE OF WIRE OR
ELECTRODES USED. OTHER INFLUENCING FACTORS ARE THEPRESENCE OF
CONTAMINANTS. CHLORINATED SOLVENTS MAY DECOMPOSE TO TOXIC GASES.
================== Physical/Chemical Properties ==================
HCC:N1
Solubility in Water:INSOLUBLE
Appearance and Odor:SOLID ELECTRODES, 14 IN LONG, ROUND, ODORLESS.
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
STRONG ACIDS AND ALKALIS
Stability Condition to Avoid:NONE
Hazardous Decomposition Products:WELDING AND CUTTING OPERATION MAY
INCLUDE OXIDES OF THE METALS, CHROMATES, FLUORIDES, COMPLEX
METALLICS, AND OZONE.
==================== Disposal Considerations ====================
Waste Disposal Methods:DISPOSE I/A/W FEDERAL, STATE & LOCAL REGULATIONS
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|
|
| ALL PAGES On Chemical Property IN THIS GROUP
| | NAME | CAS |
|
CASCOPHEN RS-240MD
| 64-17-5
108-46-3
108-95-2
1310-73-2 |
|
COVERLAC SC 247-2 BRUSHABLE
| 108-88-3
1330-20-7
64741-41-9
13463-67-7
8030-30-6
64-17-5
7440-66-6 |
|
TECTYL 846
| 64742-48-9 |
|
200 FLUID 1 CST
| 107-51-7
556-67-2 |
|
MIL-P-23377E; TYPE I, CLASS I, YELLOW
| 13463-67-7
14807-96-6
78-93-3
108-88-3
67-63-0
112945-52-5
7789-06-2 |
|
POTASSIUM NITRITE, 3202
| 7758-09-0 |
|
1350 SEA GOIN EPOXY BASE
| 25036-25-3
68609-96-1 |
|
H.D. SEA GOIN EPOXY PUTTY 1350 (CATALYST, PART B)
| 112-57-2
112-24-3
90-72-2 |
|
DONAX TD FLUID
| 64742-54-7
64742-46-7
64742-53-6
64742-65-0 |
|
HYSOL KS0002 (K20) PART A
| 7440-22-4
101-90-6
25068-38-6
122-60-1 |
|
HYSOL KS0002, (K20), PART B
| 7440-22-4
140-31-8
84852-15-3 |
|
ECCOBOND SOLDER 70C PART A
| 106-89-8 |
|
NADIC METHYL ANHYDRIDE;NMA
| 25134-21-8 |
|
NITROUS OXIDE
| 10024-97-2 |
|
GRANULAR SILICA GEL
| 63231-67-4 |
|
74-S, DRIER CARTRIDGE
| 1343-98-2 |
|
BONDMASTER E645 PART 1, 84-6451
| 25085-99-8
109-86-4 |
|
WAY LUBRICANT 68,00561
| 64742-65-0
68990-64-7 |
|
DY-CHECK/FLURO-CHEK NAD DEVELOPER PSU
| 1717-00-6
471-34-1
67-63-0
811-97-2
21645-51-2 |
|
GOLD LABEL MIST (AEROSOL)
| 67-63-0
68475-59-2 |
|
EPON(R) RESIN 828
| 25068-38-6 |
|
7159 COATED HIGH ALLOY ELECTRODES
| 7439-96-5
7440-21-3
7440-47-3
7440-02-0
7439-98-7
7439-89-6
13463-67-7
7789-75-5
1317-65-3
7782-42-5 |
|
STELLITE 1, 4, 6, TP-6, 12, 21, 25, 31, 190, 694
| 7439-96-5
7440-21-3
7440-47-3
7440-02-0
7439-98-7
7439-89-6
7440-33-7
7440-48-4 |
|
KIDDS ABC MULTIPURPOSE (CHEMICAL DRY POWDER)
| 7722-76-1
7783-20-2
12001-26-2
8031-18-3
112945-52-5
68037-59-2 |
|
LAC SPRAY CHEM RESIST,BLACK 17038, ID 799704
| 110-19-0
67-63-0
9004-70-0
78-83-1
78-93-3
1330-20-7
100-41-4
117-81-7
108-88-3
142-82-5
110-54-3 |
|
E-139 SODIUM HYDROXIDE (TECH) FLAKES
| 1310-73-2 |
|
PIPE JOINT COMPOUND, CDA 148
| 1332-58-7
68439-93-0
8050-09-7
67-63-0
14807-96-6
8002-43-5
1333-86-4 |
|
PIPE JOINT COMPOUND, CDA 148
| 1332-58-7
8050-09-7
67-63-0
68439-93-0
8002-43-5
1309-37-1 |
|
55 DEVELOPER 187 2894
| 7732-18-5
7757-83-7
123-31-9
1310-58-3
584-08-7 |
|
GASKET COMPOUND, TYPE V, CDA 145
| 8050-09-7
67-63-0
68439-93-0
14807-96-6 |
|
SULFURIC ACID 66 DEDGREE
| 7664-93-9
7732-18-5 |
|
NITRIC ACID - 38 BE, 42 BE, TOWER GRADE
| 7697-37-2
7732-18-5 |
|
VM&P NAPHTHA
| 64742-89-8 |
|
F-173 SODIUM SILICATE SOLUTION
| |
|
GASKET SEALANT NO. 1, CDA 150
| 1332-58-7
8050-09-7
67-63-0
68439-93-0
8002-43-5
1309-37-1 |
|
GASKET SEALANT NO. 1, CDA 150
| 1332-58-7
8050-09-7
67-63-0
68439-93-0
8002-43-5
1309-37-1 |
|
TYPE 59F
| 7439-97-6 |
|
NO.5 FUEL OIL
| |
|
VV-P-236
| 8009-03-8 |
|
GASKET SEALANT #2, CDA 149
| 1332-58-7
8050-09-7
67-63-0
68439-93-0
8002-43-5 |
|
MAGNETIC PARTICLE 3 A BLACK
| |
|
ISOPROPYL ALCOHOL
| 67-63-0 |
|
ACETYLENE
| 74-86-2 |
|
SUPER AGITENE
| 64742-47-8
34590-94-8 |
|
WAX, GENERAL PURPOSE, SOLVENT TYPE
| 8052-41-3 |
|
WAX, GENERAL PURPOSE, SOLVENT TYPE
| 8052-41-3 |
|
RESIWELD, FE-0004-A
| 25085-99-8
112945-52-5
1317-65-3 |
|
RESIWELD, FE-0004-B
| 111-40-0
68410-23-1
112945-52-5
1317-65-3 |
|
DIESEL FUEL
| 68476-34-6
71-43-2
142-82-5
110-54-3
91-20-3
111-84-2
111-65-9 |
|
DIESEL FUEL
| 111-65-9
111-84-2
91-20-3
110-54-3
142-82-5
7783-06-4 |
|
|