Search   
MSDS  : TAPE PRIMER ADHESIVE
CAS  : 75-09-2
74-98-6
NAME  : methylene chloride (sara 313) (cercla) (vapor pressure 420
propane/isobutane (75-28-5) (vapor pressure 115 psig @
voc: 1.89 lbs/gal (-water)
===================== Product Identification =====================

MSDS NAME:TAPE PRIMER ADHESIVE
NIIN:01-040-0947
MSDS Number: BWRXN
=== Responsible Party ===
Company:NATIONAL AEROSOL PRODUCTS CO
Address:2193 E 14TH STREET
City:LOS ANGELES
State:CA
ZIP:90021
Country:US
Info Phone Num:213-627-2668
Emergency Phone Num:213-627-2668/303-623-5716
CAGE:59986
=== Contractor Identification ===
Company:NATIONAL AEROSOL PRODUCTS CO SUB OF GROW GROUP INC
Address:2193 E 14TH STREET
Box:City:LOS ANGELES
State:CA
ZIP:90021-2843
Country:US
CAGE:59986

============= Composition/Information on Ingredients =============

Name:METHYLENE CHLORIDE (SARA 313) (CERCLA) (VAPOR PRESSURE 420
MM HG @ 77F) (LEL 12.0)
CAS:75-09-2
RTECS #:PA8050000
Fraction by Wt: 50%
Other REC Limits:NONE RECOMMENDED
OSHA PEL:500 PPM; 2000 MG/M3
ACGIH TLV:100 PPM; 20 MG/M3
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS

Name:PROPANE/ISOBUTANE (75-28-5) (VAPOR PRESSURE 115 PSIG @
100F)
CAS:74-98-6
RTECS #:TX2275000
Fraction by Wt: 28%
Other REC Limits:NONE RECOMMENDED
ACGIH TLV:SIMPLE ASPHYXIANT

Name:VOC: 1.89 LBS/GAL (-WATER)
RTECS #:9999999VO
Other REC Limits:NONE RECOMMENDED

===================== Hazards Identification =====================

Routes of Entry: Inhalation:YES Skin:UNKNOWN Ingestion:YES
Health Hazards Acute and Chronic:INHAL: RESP TRACT IRRITATION, EFFECT
BRAIN, NERVOUS SYSTEM (DIZZINESS, HEADACHES, NAUSEA, WEAKNESS,
FATIGUE). UNCONSCIOUSNESS, RESPIRATORY ARREST. EYE OR SKIN: IRRIT.
INGEST: STOMACH/INTESTINAL IRRIT, NAUSEA, VOMITING, DIARRHEA.
ASPIRATIONCAN CAUSE CHEMICAL PNEUMONITIS WHICH CAN BE FATAL.
METHYLENE CHLORIDE IS *
Explanation of Carcinogenicity:NTP HAS CLASSIFIED METHYLENE CHLORIDE AS
CARCINOGENIC IN RATS AND MICE AT HIGH LEVELS OF EXPOSURE.
Effects of Overexposure:* METABOLIZED BY THE BODY TO CARBON MONOXIDE
WHICH REDUCES THE BLOOD OXYGEN CARRYING CAPACITY. CHRONIC: REPORTS
ASSOCIATE REPEATED/PROLONGED OVEREXPOSURE W/PERMANENT BRAIN &
NERVOUS SYSTEM DAMAGE. PRO LONGED AND REPEATED BREATHING OF SPRAY
MIST/SANDING DUST OVER PERIOD OF YEARS CAUSE DUST DISEASE OF THE
LUNGS.
Medical Cond Aggravated by Exposure:NONE WHEN USED IN ACCORDANCE WITH
SAFE HANDLING AND USE INFORMATION.

======================= First Aid Measures =======================

First Aid:INHAL:IF BREATHING DIFFICULT,GET FRESH AIR.IF CONTN'D
DIFFICULT,GET MED AID IMMED.IF BREATH STOPS,RESTORE USING CPR.GET
MED AID IMMED.EYES:FLUSH W/WATER AT LEAST 15 MINS.GET MED
AID.SKIN:WASH THOROUGH LY W/SOAP & WATER.REMOVE SOILED CLOTHING.GET
MED AID IF IRRIT PERSISTS. INGEST:DON'T INDUCE VOMITING.SEE DR
IMMED.ASPIRATION CAN CAUSE CHEM PNEUMONITIS.CONCENTRATING &
INHALING MAY BE HARMFUL/FATAL.

===================== Fire Fighting Measures =====================

Extinguishing Media:IN CASE OF FIRE USE CO2, DRY CHEMICAL, FOAM OR
OTHER NFPA APPROVED METHOD FOR TREATING FIRES OF THIS TYPE.
Fire Fighting Procedures:GET PROF FIREMEN.USE PROTECT EQUIP
W/SCBA.WATER MAY BE INEFFECTIVE,USE (FOG NOZZLES PREFERRED) TO COOL
FIRE EXPOSED CONTAINER,PREVENT PRESSR BLDUP,AUTOIGNITION.
Unusual Fire/Explosion Hazard:KEEP CNTNR CLSD. KEEP FROM HEAT/FLAME.
DUE TO PRESSR BLDUP, CLSD CNTNR EXPOSED TO HEAT MAY EXPLODE. NEVER
USE CUT/WELD TORCH ON/NEAR CNTNRS.DECOM PROD-HLTH HZD.

================== Accidental Release Measures ==================

Spill Release Procedures:REMOVE IGNIT SOURCES (FLAMES,HOT
SURFACES,ELEC,STATIC,FRICTNL SPARKS).DON'T SMOKE.AVOID BREATHING
VAPOR.BEFORE CLEANUP REFER TO HAZARD CAUTION INFO IN OTHER
SECTIONS.VENT AREA.CONTAIN SPILL.REMOVE W/I NERT ABSORB & NON-SPARK
TOOLS.STORE IN CL

====================== Handling and Storage ======================

Handling and Storage Precautions:DO NOT SMOKE. EXTINGUISH PILOT LIGHTS
& TURN OFF IGNITION SOURCES INCLUDING HEATERS, FANS & OTHER
NON-EXPLOSIVE PROOF ELECTRICAL EQUIP TILL VAPORS GO.
Other Precautions:VAPORS MAY IGNITE EXPLOSIVELY OR CAUSE FLASH FIRE.
VAPORS MAY SPREAD LONG DISTANCES & BEYOND CLOSED DOORS. PREVENT
BUILD-UP OF VAPOR BY MAINTAINING CONTINUOUS FLOW OF FRESH AIR.

============= Exposure Controls/Personal Protection =============

Respiratory Protection:DO NOT BREATH VAPOR,MIST,SAND DUST.IF SPRAYING
IN INDOOR/OPEN AREAS W/UNRESTRICTED VENT DURING SAND/GRIND
OPERATN,USE NIOSH/MSHA MECHAN FILTER.IN RESTRICTED AREA,WEAR
CHEM/MECHAN FILTERS,IN CONFINED A REA,AIR SUPPLD RESPRTR/AIR HOOD.
**
Ventilation:GENRL DILUTN/LOCAL EXHAUST TO KEEP SOLVENT VAPOR FROM LOW LEVELS OF WRK AREA.REMOVE IGNIT SOURCES.
Protective Gloves:DON'T GET ON SKIN.SOLVNT IMPERMBL GLOVES
Eye Protection:SOLVNT RESIST EYEWEAR W/SPLSHGRD/SDSHLDS
Other Protective Equipment:DO NOT GET ONTO SKIN. SOLVENT IMPERMEABLE
CLOTHING AND BOOTS ARE TO PREVENT CONTACT ARE RECOMMENDED.
Work Hygienic Practices:REMOVE AND WASH OILED CLOTHING BEFORE REUSE.
WASH HANDS BEFORE EATING, SMOKING OR USING WASHROOM.
Supplemental Safety and Health
** USE NIOSH/MSHA APPROVED RESPIRATORS WHEN FLAME CUTTING, WELDING,
BRAZING AND SANDING MATERIAL COATED W/THIS PRODUCT. FOLLOW
RESPIRATOR MANUFACTURER'S DIRECTIONS FOR PROPER RESPIRATOR USE.

================== Physical/Chemical Properties ==================

Boiling Pt:B.P. Text:44 TO 98F
Vapor Density:> AIR
Evaporation Rate & Reference:FASTER THAN ETHER
Percent Volatiles by Volume:98

================= Stability and Reactivity Data =================

Stability Indicator/Materials to Avoid:YES
AVOID CONTACT WITH STRONG OXIDIZING AGENTS.
Hazardous Decomposition Products:MAY CAUSE HAZARDOUS FUMES WHEN HEATED
TO DECOMPOSITION. FUMES MAY CONTAIN CARBON MONOXIDE.

==================== Disposal Considerations ====================

Waste Disposal Methods:STORE IN CLOSED CONTAINERS UNTIL PROPERLY
DISPOSED OF. DISPOSE OF IN ACCORDANCE WITH LOCAL, STATE, ADN
FEDERAL REGULATIONS. INCINERATE ONLY IN APPROVED FACILITY. DO NOT
INCINERATE CLOSED CONTAINERS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

*** END OF RECORD ***
Search More   
ALL PAGES On Chemical Property IN THIS GROUP
NAMECAS
A-202 BATTERY CORR PREV SPRAY AEROSOL 74-98-6
127-18-4
108-88-3
67-64-1
HELIUM 7440-59-7
HYLOMAR PL 32 75-09-2
67-64-1
P-D-220D
PD-220D
PR-1139-R TYPE III & IV, ALL COLORS, PART B 110-43-0
TAPE PRIMER ADHESIVE 75-09-2
74-98-6
23377D GREEN COMP A; F-07P38 1333-86-4
1309-37-1
14807-96-6
7789-06-2
67-63-0
108-88-3
108-65-6
78-93-3
MIL-P-23377 TYPE II B-COMPONEN; F-07P39 67-63-0
108-88-3
78-93-3
477634, 1N POTASSIUM HYDROXIDE 1310-58-3
HYLOMAR PL 32 75-09-2
67-64-1
HYSOL EA 9309 NA PT SYSTEM, PART A 25068-38-6
112945-52-5
HYSOL EA 9309NA PT SYSTEM, PART B 4246-51-9
PASTE SILICONE, RTV9858 77-58-7
13463-67-7
14808-60-7
63148-62-9
MK 132 MARINE FLARE SIGNAL, 6263352 7439-95-4
10042-76-9
7778-74-7
9002-86-2
8052-42-4
15345-44-0
92-24-0
1345-04-6
1022-31-8
7440-67-7
1309-60-0
75-09-2
809 0532, KODAK FLEXICOLOR STABILIZER & REPLENISHER LF 7732-18-5
100-97-0
25155-30-0
110-98-5
2634-33-5
TOUGH DUTY 111-76-2
67-63-0
LITHIUM THIONYL CHLORIDE BATTERY 7719-09-7
7446-09-5
122 4930 EKTACOLOR RA DEVELOPER ADDITIVE 7732-18-5
3710-84-7
2399-73-7
7447-40-7
N-5117 DARK GREEN H/S SI ALKYD 34097 8052-41-3
64742-95-6
1314-13-2
7440-48-4
N-5349 WHITE SILICONE ENAMEL 17875 1317-65-3
8052-41-3
64742-95-6
7440-48-4
N-5377 GRAY SILICONE ENAMEL 16307 1317-65-3
8052-41-3
64742-95-6
7440-48-4
N-5352 GRAY SI ALKYD 26173 8052-41-3
64742-95-6
1314-13-2
7440-48-4
N-5138 GRAY SI ALKYD 26373 8052-41-3
64742-95-6
1314-13-2
7440-48-4
TT-P-1952C TY I 37038 BLACK, 700B47 14807-96-6
67-56-1
N-5845 BLUE SILICONE ENAMEL 15182 1317-65-3
8052-41-3
64742-95-6
7440-48-4
N-5758 RED SI ALKYD 15199 8052-41-3
1317-65-3
64742-95-6
7440-48-4
N-5847 BUFF SILICONE ENAMEL 10371 1317-65-3
8052-41-3
64742-95-6
7440-48-4
N-5739 YELLOW SILICONE ENAMEL 23695 8052-41-3
64742-95-6
1314-13-2
7440-48-4
N-5377 GRAY SILICONE ENAMEL 16307 1317-65-3
8052-41-3
64742-95-6
7440-48-4
N-5544 GRAY SILICONE ENAMEL 16099 1317-65-3
8052-41-3
64742-95-6
7440-48-4
N-5848 GRAY SILICONE ENAMEL 16076 1317-65-3
8052-41-3
64742-95-6
7440-48-4
N-5848 GRAY SILICONE ENAMEL 16076 1317-65-3
8052-41-3
64742-95-6
7440-48-4
155 8600;MICROFILM MINI PROCESSING WASH 1 7732-18-5
10117-38-1
155 8600;MICROFILM MINI PROCESSING WASH 2;KAN 449504 7732-18-5
64-19-7
127-09-3
158 2352;EKTACOLOR RA BLEACH FIXER/RA-4;PT.A;KAN 471342 7732-18-5
7783-18-8
7631-90-5
64-19-7
158 2352 KODAK EXTACOLOR RA BLEACH FIXER / RA-4; P/N = B 7732-18-5
21265-50-9
64-19-7
158 2352;EKTACOLOR RA BLEACH FIXER/RA-4;W/S;KAN 966214 7732-18-5
7783-18-8
7631-90-5
64-19-7
21265-50-9
142 8366 KODAK EKTACOLOR RA BLEACH FIX & RPLENSHR NR, PART B 7732-18-5
21265-50-9
20824-56-0
TT-P-1952C TY 2 35180 BLUE 700L45 14807-96-6
67-56-1
TT-P-1952C TY 1 35180 BLUE P/C 700L47 14807-96-6
67-56-1
TT-P-1952C TY 1 31136 RED 700R47 14807-96-6
67-56-1
TT-P-1952C TY 2 31136 RED, P/C 700R45 14807-96-6
67-56-1
TT-E-2784, EXTERIOR TRIM ENAMEL 24518 LIGHT (SUPDAT) 25265-77-4
1323 BAN-O 67-63-0
BIO T-200A
154 3420;C DEVELOPER,RED;KAN 471120 12023-91-5
57516-68-4
24937-79-9
25767-47-9
7023-61-2
182 6932;C DEVELOPER,YELLOW;KAN 471131 12023-91-5
57516-68-4
25767-47-9
6358-85-6
9011-14-7
108 6388 EKTACOLOR PRIME BLEACH FIX AND REPLENISHER,PART B 7732-18-5
21265-50-9
64-19-7
108 6388 EKTACOLOR PRIME BLEACH FIX & REPLENISHER,WORK SOLN 7732-18-5
21265-50-9
7783-18-8
7631-90-5
64-19-7

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net