===================== Product Identification =====================
MSDS NAME:PRIMER COATING 724222
NIIN:00-142-9279
Kit Part:Y
MSDS Number: BDBTF
=== Responsible Party ===
Company:PRATT & LAMBERT, INC.-INDUSTRIAL COATINGS DIV.
Address:16116 E 13TH ST
Box:2153
City:WICHITA
State:KS
ZIP:67201
Country:US
Preparer's Name:W. A. ELLISON
CAGE:FO127
=== Contractor Identification ===
Company:PRATT & LAMBERT, INC/BUFFALO, NY 14240
Box:22
CAGE:FO127
Company:PRATT AND LAMBERT INC
Address:Box:6027
City:CLEVELAND
State:OH
ZIP:44101-1027
Country:US
Phone:216-566-2902
CAGE:61196
============= Composition/Information on Ingredients =============
Name:TOLUENE (SARA III)
CAS:108-88-3
RTECS #:XS5250000
OSHA PEL:200 PPM/150 STEL
ACGIH TLV:50 PPM; 9293
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS
Name:PROPYLENE GLYCOL MONOMETHYL ETHER
CAS:107-98-2
RTECS #:UB7700000
OSHA PEL:100 PPM/150 STEL
ACGIH TLV:100 PPM/150STEL;9192
Name:STRONTIUM CHROMATE (SARA III)
CAS:7789-06-2
RTECS #:GB3240000
OSHA PEL:0.1 PPM CRO3;CEILING
ACGIH TLV:0.0005MG CR/M3;A2;93
EPA Rpt Qty:10 LBS
DOT Rpt Qty:10 LBS
Name:TITANIUM DIOXIDE
CAS:13463-67-7
RTECS #:XR2275000
OSHA PEL:15 MG/M3 TDUST
ACGIH TLV:10 MG/M3 TDUST; 9293
Name:TALC (CONTAINING NO ASBESTOS)
CAS:14807-96-6
RTECS #:WW2710000
OSHA PEL:2 MG/M3 RDUST
ACGIH TLV:2 MG/M3 RDUST; 9192
Name:SILICA, AMORPHOUS, DUST
CAS:112945-52-5
RTECS #:VV7310000
OSHA PEL:6 MG/M3
ACGIH TLV:10 MG/M3; 8990
Name:ISOBUTYL ALCOHOL (SARA III)
CAS:78-83-1
RTECS #:NP9625000
OSHA PEL:100 PPM
ACGIH TLV:50 PPM; 9293
EPA Rpt Qty:5000 LBS
DOT Rpt Qty:5000 LBS
===================== Hazards Identification =====================
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:YES IARC:YES
Health Hazards Acute and Chronic:PROLONGED OR REPEATED OCCUPATIONAL
OVEREXPOSURE TO SOLVENTS HAVE BEEN ASSOCIATED WITH PERMANENT BRAIN
AND NERVOUS SYSTEM DAMAGE. REPEATED OVEREXPOSURE TO TOULENE MAY
CAUSE LIVER DAMAGE.
Explanation of Carcinogenicity:CHROMIUM AND CERTAIN CHROMIUM COMPOUNDS
ARE LISTED AS POTENTIAL CARCINOGENS BY THE NTP AND THE IARC.
Effects of Overexposure:GASTROINTESTINAL IRRITATION, NAUSEA, VOMITING &
ABDOMINAL PAIN. IRRITATION OF THE NOSE & THROAT & ACUTE NERVOUS
SYSTEM DEPRESSION. HEADACHE, DIZZINESS, CONFUSION, NAUSEA,
UNCONSCIOUSNESS & EVEN ASPHYX IATION. MAY CAUSE EYE IRRITATION,
DEFATTING & IRRITATION OF THE SKIN.
======================= First Aid Measures =======================
First Aid:IF SWALLOWED-INDUCE VOMITING IMMED BY GIVING 2 GLASSES OF
WATER & STICKING FINGER DOWN THROAT. CONSULT MD OR POISON CONTROL
CENTER IMMED. INHALED-REMOVE TO FRESH AIR IMMED. IF BREATHING HAS
STOPPED, G IVE ARTIFICIAL RESPIRATION. KEEP WARM &QUIET. GET MED
ATTN IMMED. EYE-FLUSH WITH LARGE AMNTS OF WATER AT LEAST 15 MIN.
SKIN-WASH AFFECTED AREA WITH SOAP & WATER. MED ATTN IF IRRIT
PERSISTS.
===================== Fire Fighting Measures =====================
Flash Point:40F-4.44C
Extinguishing Media:NFPA CLASS B FIRE EXTINGUISHER DESIGNED TO
EXTINGUISH FLAMMABLE LIQUID FIRES. POLYMER FOAM PREFERRED FOR LARGE
FIRES.
Fire Fighting Procedures:WEAR SELF CONTAINED BREATHING APPARATUS. WATER
MAY BE INEFFECTIVE, BUT MAY BE USED TO PREVENT PRESSURE BUILD-UP.
IF WATER IS USED, FOG NOZZLES ARE PREFERABLE.
Unusual Fire/Explosion Hazard:KEEP CONTAINERS TIGHTLY CLOSED. ISOLATE
FROM HEAT, ELECTRICAL EQUIPMENT, SPARKS AND FLAME. CLOSED
CONTAINERS MAY EXPLODE WHEN EXPOSED TO EXTREME HEAT.
================== Accidental Release Measures ==================
Spill Release Procedures:KEEP SPECTATORS AWAY. ELIM ALL IGNITION
SOURCES. DIKE & CONTN SPILL WITH INERT MATL. TR LQDS TO COV MTL
CNTNR FOR RECOV OR DISP OR REM W/INERT ABSORB. USE NON-SPRKG TOOLS.
PLACE ABSORB MAT IN COV META L CONTNR FOR DISP.PREVENT CONTAM OF
SEW, STRMS,ETC
====================== Handling and Storage ======================
Handling and Storage Precautions:DO NOT STORE ABOVE 120 DEGREES F.
STORE LARGE QUANTITIES IN COMPLIANCE WITH OSHA 29CFR1910.106.
Other Precautions:DO NOT TAKE INTERNALLY. CLOSE CONTAINER AFTER EACH
USE. EMPTY CONTAINERS MUST NOT BE WASHED AND RE-USED FOR ANY
PURPOSE. NEVER USE PRESSURE TO EMPTY. DRUM IS NOT A PRESSURE
VESSEL. DO NOT WELD, BRAZE OR CUT ON EMPTY CONTAINER.
============= Exposure Controls/Personal Protection =============
Respiratory Protection:SPRAYING OUTDOORS OR IN OPEN AREA USE NIOSH
APPROVED MECH FILTER RESPIRATOR TO REMOVE OVERSPRAY. RESTRICTED
AREA, NIOSH APPROVED PAINT SPRAY(CHEMICAL CARTRIDGE/MECHANICAL
FILTER)RESPIRATOR. CONFINED A REA, NIOSH APPROVED AIR-SUPPLIED
RESPR.
Ventilation:PROVIDE GENERAL DILUTION & LOCAL EXHAUST VENTILATION. VENT
VAPORS PRODUCED WHILE DRYING OR BAKING THIS PRODUCT.
Protective Gloves:IMPERMEABLE GLOVES
Eye Protection:WEAR SAFETY SPECTACLES WITH SIDE SHIELDS
Other Protective Equipment:NOT LIKELY TO BE NEEDED
Supplemental Safety and Health
SLVENT IMPERMEABLE GLOVES ARE REQUIRED FOR REPEATED OR PROLONGED
CONTACT. WEAR FACESHIELD WHEN NECESSARY WHEN SPRAYING. PART "A"
OF TWO PART PRODUCT. SEE P/N IND "D" FOR PART "B". KEY1;J1.
================== Physical/Chemical Properties ==================
Boiling Pt:B.P. Text:210F-475F
Vapor Pres:22
Vapor Density:>AIR
Evaporation Rate & Reference:SLOWER THAN ETHER
Percent Volatiles by Volume:63
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
STRONG ACIDS OR ALKALINE MATERIALS.
Stability Condition to Avoid:NONE KNOWN
Hazardous Decomposition Products:BURNING, INCLUDING WHEN HEATED BY
WELDING OR CUTTING, WILL PRODUCE SMOKE, CARBON MONOXIDE AND CARBON
DIOXIDE.
==================== Disposal Considerations ====================
Waste Disposal Methods:IAW FED, STATE & LOCAL LAWS. INCINERATE ONLY IN
EPA PERMITTED FACILITY. DO NOT INCINERATE CLOSED CONTAINERS.
OBSERVE PRECAUTIONS FOR DISPOSAL OF FLAMMABLE MATERIALS.
CONTAMINATED ABSORBANT MAY BE DISP OSED IN A HAZARDOUS WASTE
LANDFILL.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|
|
| ALL PAGES On Chemical Property IN THIS GROUP
| | NAME | CAS |
|
61031 STALASTIC HI TEMP MASTIC; SH 883 1033
| 8052-41-3 |
|
EPOCAST 41-A. PART-A
| |
|
EPOCAST 41-B, PART-B (OLD NAME:EPOCAST 4396
| 108-95-2 |
|
RTV-8111,POTTING CMPD
| 78-10-4 |
|
RTV-9891 CATALYST,MIL-S-23586,TY I, CL 1
| 95-14-7 |
|
SS-4004 SILICONE PRIMER
| 71-36-3
67-64-1
67-63-0
108-88-3
78-10-4 |
|
RTV-9858 CATALYST MIL-S-23586 TY I
| 78-10-4 |
|
RTV-9858 CATALYST MIL-S-23586 TYI
| 77-58-7
95-14-7 |
|
SS-4004 SILICONE PRIMER MIL-S-23586 TYI
| 71-36-3
67-64-1
67-63-0
108-88-3
78-10-4 |
|
CRESYLIC ACID
| |
|
DAP WELDWOOD CONTACT CEMENT
| 110-54-3
108-88-3
67-64-1 |
|
TB1743
| 7085-85-0
9011-14-7 |
|
GENETRON 12 & GENESOLV D SOLVENT
| 76-13-1
75-71-8 |
|
SUPER ELECTRO SPRAY
| 76-13-1
75-71-8 |
|
FREON 12 & FREON 113
| 76-13-1
75-71-8 |
|
MIL-L-9000G,LUBE OIL-HIGH OUTPUT DIESEL ENG
| |
|
MIL-L-9000-G GRADE 9250
| |
|
TURCOAT LIQUID ACCELAGOLD
| |
|
TURCO 5469
| 75-09-2
108-95-2
7775-11-3 |
|
PIGMENTED COMPONENT (SEE SUPP DATA)
| 108-88-3
105-46-4
78-93-3
71-36-3
8030-30-6 |
|
CONVERTER (SEE SUPP. DATA)
| 71-36-3
67-63-0
1330-20-7
110-80-5 |
|
724-102 724-112
| 108-88-3
71-36-3
67-63-0
78-93-3
110-80-5 |
|
PRIMER COATING
| 7789-06-2
25068-38-6
108-88-3 |
|
02-Y-24 BASE,YELLOW,EPOXY POLYAMIDE PRIMER
| 78-93-3
123-86-4
7789-06-2
108-88-3 |
|
02-Y-24 CTLST,YELLOW,EPOXY POLYAMIDE PRIMER
| 78-93-3
67-63-0
123-86-4
1330-20-7
108-88-3 |
|
02-Y-24 CTLST,YELLOW,EPOXY POLYAMIDE PRIMER
| 71-36-3 |
|
990T003 EPOXY CATALYST MIL P 23377D COMPONENT B
| 34590-94-8
67-63-0 |
|
724222-COMP A
| 78-83-1
108-88-3
1330-20-7
14807-96-6
14808-60-7
63231-67-4
13463-67-7
7789-06-2 |
|
724112-COMP B
| 78-83-1
67-63-0
78-93-3
108-88-3
1330-20-7 |
|
PRIMER COATING 724222
| 108-88-3
107-98-2
7789-06-2
13463-67-7
14807-96-6
112945-52-5
78-83-1 |
|
POLYAMIDE RESIN 724112
| 67-63-0
71-36-3
108-88-3
78-83-1
78-93-3 |
|
513 X 366 PRIMER; MIL-P-23377D TYPE I
| 111-15-9
78-93-3
71-36-3
108-88-3
7789-06-2 |
|
463-7-26, ELECTROSTATIC POLYAMIDE PRIMER-YEL.
| 7789-06-2
13463-67-7
14807-96-6
123-86-4
108-88-3
68855-54-9
78-93-3
108-65-6
112945-52-5 |
|
BRAYCOTE 103
| |
|
MIL-C-16173D AEROSOL COATING COMPOUND
| 108-88-3
112-07-2
67-64-1
75-71-8 |
|
MIL-C-16173D, GR 4, RUST PREVENTATIVE
| 8052-41-3 |
|
METHYL PURPLE INDICATOR SOLUTION;SO-I-9
| 845-10-3
3986-30-4
7732-18-5 |
|
METHYL RED/ACID BLUE 5 POWDER
| 845-10-3 |
|
METHYL PURPLE INDICATOR
| 493-52-7
129-17-9 |
|
METHYL PURPLE INDICATOR
| 493-52-7
129-17-9 |
|
SCOTCHSEAL BRAND ACCELERATOR
| 1309-60-0
1330-20-7 |
|
MOLYKOTE 33 GREASE-ALL GRADES
| |
|
ZINCPRIME 42 WATER BASE LIQ,PT A (105L0270)
| 1332-58-7
7732-18-5 |
|
ZINCPRIME 4Z PRIMER,PT B (105P0999)
| 7440-66-6
1309-37-1 |
|
D-A ROCK DRILL LUBRICANT 500
| |
|
LAGGING ADHESIVE/COATING,713
| 107-21-1
108-05-4
107-41-5 |
|
LAGGING ADHESIVE/COATING,713 NG
| 107-21-1
108-05-4
107-41-5 |
|
50-2009,LAGGING ADHESIVE
| 108-05-4 |
|
LAGGING ADHESIVE,50-207
| 1330-78-5
63449-39-8
1309-64-4
14808-60-7 |
|
ARABOL E-1658B-RED
| 107-21-1
111-77-3
1317-65-3
63449-39-8 |
|
|