| MSDS | : | FR-8600 F/C 7781V, 37 | | CAS | : | 330-54-1
1309-64-4
65997-17-3
1675-54-3
330-54-1 | | NAME | : | arsenic compounds
antimony trioxide, antimony oxide
glass, oxide, sodium calcium magnesium silica polyphosphate
2,2-bis(4-(2,3-epoxypropyloxy)phenyl)propane, bisphenol a
epoxy resin
diuron
|
| |
|
|
===================== Product Identification =====================
MSDS NAME:FR-8600 F/C 7781V, 37
NIIN:00F041099
MSDS Number: BXNBR
=== Responsible Party ===
Company:FIBER-RESIN CORP SUB OF HB FULLER CO
Address:170 W PROVIDENCIA AVE
Box:91503
City:BURBANK
State:CA
ZIP:91503-5000
Country:US
Info Phone Num:800-624-9487/612-481-4842
Emergency Phone Num:612-481-4842/800-624-9487
CAGE:DO271
=== Contractor Identification ===
Company:3H B FULLER CO
Box:City:BURBANK
State:CA
ZIP:91503
Country:US
Phone:800-624-9487;612-481-3300
CAGE:0HB93
Company:FIBER-RESIN CORP.
Address:170 W PROVIDENCIA AVE
Box:91503
City:BURBANK
Phone:800-424-9300
CAGE:DO271
============= Composition/Information on Ingredients =============
Name:ARSENIC COMPOUNDS
CAS:330-54-1
Fraction by Wt: <0.0013%
EPA Rpt Qty:100 LBS
DOT Rpt Qty:100 LBS
Name:ANTIMONY TRIOXIDE, ANTIMONY OXIDE
CAS:1309-64-4
RTECS #:CC5650000
Fraction by Wt: 1-5%
ACGIH TLV:0.5 MG/CUM (A2)
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS
Name:GLASS, OXIDE, SODIUM CALCIUM MAGNESIUM SILICA POLYPHOSPHATE
*95-2*
CAS:65997-17-3
Fraction by Wt: 50-70%
OSHA PEL:6 MG/CUM
ACGIH TLV:10 MG/CUM
Name:2,2-BIS(4-(2,3-EPOXYPROPYLOXY)PHENYL)PROPANE, BISPHENOL A
DIGLYCIDYL ETHER, EPON 828, EPOXIDE A
CAS:1675-54-3
RTECS #:TX3800000
Fraction by Wt: 10-30%
Name:EPOXY RESIN
Fraction by Wt: 10-30%
Name:DIURON
CAS:330-54-1
RTECS #:YS8925000
Fraction by Wt: 1-5%
OSHA PEL:10 MG/CUM
ACGIH TLV:10 MG/CUM
EPA Rpt Qty:100 LBS
DOT Rpt Qty:100 LBS
===================== Hazards Identification =====================
LD50 LC50 Mixture:ORAL LD50 (RAT): 11 GM/KG
Routes of Entry: Inhalation:NO Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYES: IRRITATION. SKIN: EPOXY RESINS
ARE POTENTIAL SENSITIZERS. INHALATION: IRRITATION OF THE NOSE,
THROAT & RESPIRATORY TRACT. INGESTION: HARMFUL. POSSIBLE CANCER
HAZARD.
Explanation of Carcinogenicity:ACCORDING TO FIBER RESIN CORP, FIBROUS
GLASS IS ANTICIPATED TO CAUSE CANCER BY NTP.
Effects of Overexposure:IRRITATION, HEADACHES, DIZZINESS.
======================= First Aid Measures =======================
Eyes: IMMEDIATELY FLUSH W/WATER FOR 15 MINS. SKIN: WASH
W/SOAP & WATER. INHALATION: REMOVE TO FRESH AIR. INGESTION: IF
PERSON CAN SWALLOW, GIVE 1 GLASS OF WATER/MILK. DON'T INDUCE
VOMITING. NEVER GIVE ANYTHING BY MOUTH TO AN UNCONSCIOUS PERSON.
OBTAIN MEDICAL ATTENTION IN ALL CASES.
===================== Fire Fighting Measures =====================
Flash Point Method:CC
Flash Point:>200F
Extinguishing Media:USE WATER SPRAY, FOAM, DRY CHEMICAL/CO2.
Fire Fighting Procedures:WEAR SELF CONTAINED BREATHING APPARATUS & FULL
PROTECTIVE EQUIPMENT.
====================== Handling and Storage ======================
Handling and Storage Precautions:WEAR APPROPRIATE PROTECTIVE EQUIPMENT
WHEN WORKING W/THIS PRODUCT.
Other Precautions:ONCE THE PRODUCT HAS REACHED ITS FINAL STATE & IS
ABRADED/DISTURBED, DUSTING & EXPOSURE MAY OCCUR.
============= Exposure Controls/Personal Protection =============
Respiratory Protection:NOT NORMALLY REQUIRED. USE NIOSH/MSHA APPROVED
RESPIRATOR IF CONDITIONS WARRANT. WEAR A NIOSH/MSHA APPROVED
RESPIRATOR W/HEPA FILTERS WHEN SANDING, CUTTING/ABRADING PRODUCT.
Ventilation:GENERAL DILUTION VENTILATION. LOCAL EXHAUST REQUIRED WHERE
DUST, MAY BE GENERATED.
Protective Gloves:RUBBER
Eye Protection:SAFETY GLASSES
Other Protective Equipment:PROTECTIVE CLOTHING.
Work Hygienic Practices:REMOVE/LAUNDER CONTAMINATED CLOTHING BEFORE
REUSE.
Supplemental Safety and Health
================== Physical/Chemical Properties ==================
Spec Gravity:1.128
Appearance and Odor:CHARACTERISTIC COLOR, SOLID W/NEUTRAL ODOR.
Percent Volatiles by Volume:100/WT
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
Hazardous Decomposition Products:HYDROGEN BROMIDE, HYDROGEN CHLORIDE,
NITROGEN COMPOUNDS, PHOSGENE, LOW MOLECULAR WEIGHT HYDROCARBONS,
CO.
==================== Disposal Considerations ====================
Waste Disposal Methods:DISPOSAL VIA INCINERATION AT AN APPROVED
FACILITY IS RECOMMENDED. DISPOSE OF IAW/LOCAL, STATE & FEDERAL
REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|
|