Spill Release Procedures:OBSERVE ALL PRECAUTIONS, VENTILATE AREA.
COLLECT SPILLAGE, CLEANUP RESIDUE, PLACE IN METAL CONTAINER.
====================== Handling and Storage ======================
Handling and Storage Precautions:AVOID CONTACT WITH EYE OR SKIN. AVOID
INHL OR EYE CONTACT WITH DUST FROM GRINDING OPERATIONS. WASH
CONTAMINATED CLOTHING BEFORE REUSE.
Other Precautions:VENT CURING OVENS TO OUTDOORS. KEEP CONTAINERS
CLOSED.
Respiratory Protection:NONE
Ventilation:MECH(GEN)OR LOCAL EXHAUST THAT PROVIDES ADEQUATE
VENTILATION
Protective Gloves:IMPERVIOUS
Eye Protection:SAFETY GLASSES
Other Protective Equipment:SCBA IN FIRE. USE DUST MASK WHEN GRINDING
CURED RESIN
Supplemental Safety and Health
PART B OF TWO PART KIT. BASIS MSDS DTD 1 NOV 86 (OSHA HAZCOMSTD), 3M
DOCUMENT 1031673. 3M GENERIC P/N IS 62-2216-XXXX-X KIT ALSO KNOWN
AS 22116B/AEC2216.B/A (GRAY).KEY1:N1.
Waste Disposal Methods:CHECK ALL APPL REGS. CURED RESIN MAY BE DISPOSED
IN SAND LAND FILL. SPILL: DISPOSE OF CLEANUP MATL BY INCINERATION.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.