MSDS NAME:6001, HIGH SOLID EPOXY-POLYAMIDE PRIMER (SUP DAT)
NIIN:00N062186
Kit Part:Y
MSDS Number: BYGMV
=== Responsible Party ===
Company:PRO-LINE PAINT CO
Address:2646 MAIN ST
City:SAN DIEGO
State:CA
ZIP:92113-3697
Country:US
Info Phone Num:619-231-2313
Emergency Phone Num:800-535-5053
Preparer's Name:E SOETERIK
CAGE:9D157
=== Contractor Identification ===
Company:PRO-LINE PAINT CO
Address:2646 MAIN STREET
Box:City:SAN DIEGO
State:CA
ZIP:92113-3697
Country:US
Phone:619-231-2313; 619-232-8968
CAGE:9D157
============= Composition/Information on Ingredients =============
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: INHAL: COUGHING, SHORTNESS OF
BREATH, MAY CAUSE DIZZ. SKIN/EYES: BURNING SENSATION, RASH BREAKOUT
W/SKIN TURNING PINK & REDNESS OF EYES. SKIN ABSORPTION: SKIN RASH
MAY CAUSE BURNING OF SKIN & I NFLAMM. INGEST: VOMIT DUE TO
UNPLEASANTTASTE. MAY CAUSE DIARR/STOM CRAMPS. CHRONIC: REPORTS HAVE
(EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:HLTH HAZ: SHOWN THAT ASSOCIATED REPEATED AND
PROLONGED OCCUPATIONAL OVEREXPOSURE TO SOLVENTS CAN CAUSE PERMANENT
BRAIN AND NERVOUS SYSTEM DAMAGE. INTENTIONAL MISUSE BY DELIBERATLY
CONCENTRATING AND IN HALING THE CONTENTS MAY BE HARMFUL OR FATAL.
Medical Cond Aggravated by Exposure:ASTHMA, EMPHYSEMA AND OTHER
RESPIRATORY DISEASES.
======================= First Aid Measures =======================
Eyes: IMMED FLUSH W/FRESH WATER FOR AT LEAST 15 MIN, BY AN
EYEWASH APPARATUS/BY HAND. SEEK MED ATTN. SKIN: WASH IMMED W/WATER.
THEN WASH W/SOAP & WATER, RINSE IMMED. IF BURNING SENSATION, RASH
BREAKOU T/OTHER SYMP OCCUR SEEK MED ATTN. INHAL: MOVE TO FRESH AIR.
ARTF RESP IF NEC. SEEK MED ATTN. INGEST: SEEK MED ATTN. NOTE TO MD:
CONSULT W/POIS CTL CTR & FOR WORKERS WHO ARE EXPOS REGULARLY, (SUP
DAT)
===================== Fire Fighting Measures =====================
Flash Point Method:SCC
Flash Point:100F,38C
Lower Limits:0.5%
Upper Limits:11.2%
Extinguishing Media:WATER SPRAY, CARBON DIOXIDE, FOAM, DRY CHEMICAL.
Fire Fighting Procedures:BLANKET FLAME WITH ONE OF THE ABOVE. WEAR
NIOSH/MSHA APPROVED SCBA & FULL PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:KEEP MATERIAL AWAY FROM HEAT, SPARKS, AND
OPEN FLAMES. EXPLOSIVE WHEN HEATED. STAY A SAFE DISTANCE FROM FIRE
WHEN EXTINGUISHING.
Spill Release Procedures:REMOVE ALL KIND OF IGNITION SOURCES. PROVIDE
SUFFICIENT VENTILATION. PROTECT CLEANUP MAN WITH 8540 3M CORP
NIOSH/MSHA APPROVED RESPIRATOR, GOGGLES AND RUBBER GLOVES.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
====================== Handling and Storage ======================
Handling and Storage Precautions:USE ONLY WITH ADEQUATE VENTILATION.
PROTECT AGAINST PHYSICAL DAMAGE TO CONTAINERS AND SPILLAGE. STORE
IN COOL WELL-VENTILATED AREA W/SPRINKLER SYSTEM.
Other Precautions:KEEP AWAY FROM HEAT. POST NO SMOKING SIGNS.
Respiratory Protection:USE NIOSH/MSHA APPRVD DUST/MIST RESP (HIGH
EFFICIENCY CARTRIDGES ADVISED) IF SPRAYING/SANDING. USE NIOSH/MSHA
APPRVD ORG VAP CARTRIDGES RESP IF TLV FOR SOLV COMPONENTS MAY BE
EXCEEDED E.G. 8540 3M COR P RESP (NIOSH/MSHA APPRVD). (SUP DAT)
Ventilation:USE LOCAL EXHAUST WHENN APPLYING THIS PAINT IN CONFINES
AREAS. KEEP VAPORS BELOW TLV.
Protective Gloves:RUBBER GLOVES.
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGS .
Other Protective Equipment:USE PROT CLTHG & CHANGE CONTAM CLTHG IMMED.
EMERG EYE WASH AND DELUGE SHOWER WHICH MEET ANSI DESIGN CRITERIA .
Work Hygienic Practices:TRAIN EMPLOYEES ON ALL SPECIAL HANDLING
PROCEDURES IN THIS SECTION BEFORE THEY WORK WITH THIS PRODUCT.
Supplemental Safety and Health
TRADE NAME/PART #: PAINT, COLOR LIGHT GREEN 2 COMPONENT PAINT. FIRST
AID PROC: PROVIDE DETAILED PERIODIC EXAMINATIONS. RESP PROT: WHEN
USING IN CONFINED AREA, WEAR NIOSH/MSHA APPRVD AIR-FED HOOD.
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
WHEN A AND B ARE MIXED, KEEP AWAY FROM HEAT. HEAT WILL CREATE A RAPID
CHEMICAL REACTION. EMITS HEAT.
Stability Condition to Avoid:HEAT, SPARKS AND OPEN FLAMES. DO NOT ALLOW
VAPOR TO ACCUMULATE.
Hazardous Decomposition Products:FLAMMABLE FUMES MAY ACCUMULATE IN
CONFINED AREA AND SPARKS OR OPEN FLAMES MAY IGNITE IT.
Waste Disposal Methods:USE METAL CONTAINER MARKED "DO NOT REUSE". PUT
THE MATERIAL IN THIS CONTAINER. USE VERMICULITE/OTHER INERT
ABSORBENT. KEEP AWAY FROM SEWER. DISPOSE OF ALL WASTES IN
ACCORDANCE W/LOCAL, STATE & FEDERAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.