LD50 LC50 Mixture:ORAL LD50(RATS): >5000 MG/KG
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHALATION: MINIMAL RESPIRATORY TRACT
IRRITATION MAY OCCUR AS W/EXPOSURE TO LARGE AMOUNTS OF ANY
NON-TOXIC DUST. EYES: IRRITATION.
Explanation of Carcinogenicity:THIS COMPOUND CONTAINS NO INGREDIENTS AT
CONCENTRATIONS OF 0.1% OR GREATER THAT ARE CARCINOGENS OR SUSPECT
CARCINOGENS.
Effects of Overexposure:IRRITATION.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
======================= First Aid Measures =======================
First Aid:INGESTION: DILUTE STOMACH CONTENTS W/SEVERAL GLASSES OF
WATER. INHALATION: REMOVE TO FRESH AIR. EYES: FLUSH W/RUNNING WATER
FOR 15 MINS. SKIN: WASH W/SOAP & WATER. OBTAIN MEDICAL ATTENTION IN
ALL CASE S.
===================== Fire Fighting Measures =====================
Flash Point:NOT GIVEN
Lower Limits:NOT GIVEN
Upper Limits:NOT GIVEN
Extinguishing Media:CO2, WATER, DRY CHEMICALS
Fire Fighting Procedures:NONFLAMMABLE. USE STANDARD FIREFIGHTING
PROCEDURES FOR SURROUNDING MATERIALS IN THE FIRE.
Unusual Fire/Explosion Hazard:TONER MATERIAL, LIKE MOST ORGANIC
MATERIAL IN POWDER FORM, IS CAPABLE OF CREATING A DUST EXPLOSION.
Spill Release Procedures:AVOID INHALATION OF DUST. SWEEP MATERIAL ONTO
PAPER/COLLECT IT.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
====================== Handling and Storage ======================
Handling and Storage Precautions:KEEP AWAY FROM CONTACT W/OXIDIZING
MATERIALS. KEEP OUT OF REACH OF CHILDREN.
Other Precautions:PRODUCT DESCRIPTION: AN ASSEMBLY FOR LASER BEAM
PRINTER, COMPOSED OF A PHOTOSENSITIVE DRUM, TONER POWDER, A
DEVELOPER UNIT, A CHARGER-ROLLER & A CLEANER BLADE. THE TONER
POWDER CAN'T BE REMOVED, UNTIL THE CARTRIDGE IS FORCED TO BE
BROKEN.
Respiratory Protection:NOT REQUIRED UNDER INTENDED USE.
Ventilation:GOOD GENERAL VENTILATION SHOULD BE SUFFICIENT UNDER
INTENDED USE.
Protective Gloves:NOT REQUIRED UNDER INTENDED USE.
Eye Protection:NOT REQUIED UNDER INTENDED USE.
Other Protective Equipment:NOT REQUIRED UNDER INTENDED USE.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.
HCC:N1
Boiling Pt:B.P. Text:NOT GIVEN
Melt/Freeze Pt:M.P/F.P Text:212-302F
Decomp Temp:Decomp Text:NOT GIVEN
Vapor Pres:NOT GIVEN
Vapor Density:NOT GIVEN
Spec Gravity:1.4-1.6
Evaporation Rate & Reference:NOT GIVEN
Solubility in Water:NEGLIGIBLE
Appearance and Odor:FINE POWDER W/SLIGHT PLASTIC ODOR
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:CARBON MONOXIDE, CARBON DIOXIDE
Waste Disposal Methods:THIS PRODUCT IS CONSTRUCTED FROM PLASTIC &
METALS. TH WASTE TONER COULD BE CONSIDERED AS PLASTIC WASTE.
DISPOSAL SHOULD BE IAW/FEDERAL, STATE & LOCAL REGULATIONS.
======================================================================
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.