===================== Product Identification =====================
MSDS NAME:PROPIDIUM IDODIDE 95-98%
NIIN:00F048670
MSDS Number: BZFTX
=== Responsible Party ===
Company:ONCOR INC
Address:209 PERRY PKY SUITE 7
City:GAITHERSBURG
State:MD
ZIP:20877-5000
Country:US
Info Phone Num:301-963-3500/800-776-6267
Emergency Phone Num:301-963-3500/800-776-6267
CAGE:016E9
=== Contractor Identification ===
Company:ONCOR INC
Address:209 PERRY PKY SUITE 7
City:GAITHERSBURG
State:MD
ZIP:20877-5000
Country:US
Phone:301-963-3500/800-776-6267
CAGE:016E9
============= Composition/Information on Ingredients =============
Name:PROPIDIUM IODIDE *96-2*
CAS:25535-16-4
RTECS #:SF7949600
Fraction by Wt: 95-98%
===================== Hazards Identification =====================
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:HARMFUL IF SWALLOWED, INHALED/ABSORBED
THROUGH SKIN. CAUSES EYE & SKIN IRRITATION. MATERIAL IS IRRITATING
TO MUCOUS MEMBRANES & UPPER RESPIRATORY TRACT. MAY ALTER GENETIC
MATERIAL.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:IRRITATION
======================= First Aid Measures =======================
First Aid:INHALATION: REMOVE TO FRESH AIR. GIVE CPR/OXYGEN IF
NECESSARY. EYES/SKIN: IMMEDIATELY FLUSH W/COPIOUS AMOUNTS OF WATER
FOR 15 MINS. OBTAIN MEDICAL ATTENTION IN ALL CASES.
===================== Fire Fighting Measures =====================
Extinguishing Media:WATER SPRAY, CO2, DRY CHEMICAL POWDER,
ALCOHOL/POLYMER FOAM
Fire Fighting Procedures:WEAR SELF CONTAINED BREATHING APPARATUS &
PROTECTIVE CLOTHING TO PREVENT CONTACT W/SKIN & EYES.
Unusual Fire/Explosion Hazard:EMITS TOXIC FUMES UNDER FIRE CONDITIONS.
================== Accidental Release Measures ==================
Spill Release Procedures:EVACUATE AREA. WEAR SCBA, RUBBER BOOTS & HEAVY
GLOVES. WEAR DISPOSABLE COVERALLS & DISCARD THEM AFTER USE. SWEEP
UP, PLACE IN A BAG & HOLD FOR WASTE DISPOSAL. AVOID RAISING DUST.
VENTILATE AREA & WASH SITE AFTER MATERIAL PICKUP IS COMPLETE.
====================== Handling and Storage ======================
Handling and Storage Precautions:KEEP TIGHTLY CLOSED. STORE IN THE DARK
IN A COOL, DRY PLACE.
Other Precautions:DON'T BREATHE DUST.
============= Exposure Controls/Personal Protection =============
Respiratory Protection:WEAR APPROPRIATE NIOSH-MSHA-APPROVED RESPIRATOR.
Ventilation:USE ONLY IN A CHEMICAL FUME HOOD.
Protective Gloves:REQUIRED
Eye Protection:SAFETY GOGGLES
Other Protective Equipment:PROTECTIVE CLOTHING
Supplemental Safety and Health
================== Physical/Chemical Properties ==================
Melt/Freeze Pt:M.P/F.P Text:428-437F
Appearance and Odor:RED POWDER
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS
Stability Condition to Avoid:LIGHT
Hazardous Decomposition Products:TOXIC FUMES OF CO, CO2, NITROGEN
OXIDES & HYDROGEN IODIDE
Conditions to Avoid Polymerization:LIGHT, STRONG OXIDIZING AGENTS
==================== Disposal Considerations ====================
Waste Disposal Methods:DISSOLVE/MIX THE MATERIAL W/A COMBUSTIBLE
SOLVENT & BURN IN A CHEMICAL INCINERATOR EQUIPPED W/AN AFTERBURNER
& SCRUBBER. DISPOSE OF IAW/LOCAL, STATE & FEDERAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|
|