Routes of Entry: Inhalation:NO Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:SKIN IRRITATION IS POSSIBLE IN
SENSITIVE INDIVIDUALS. CONTACT DERMATITIS CAN DEVELOP.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:SKIN IRRITATION IS POSSIBLE IN SENSITIVE
INDIVIDUALS. CONTACT DERMATITIS CAN DEVELOP.
======================= First Aid Measures =======================
Eyes: FLUSH IMMEDIATELY W/WATER FOR 15 MINS. SKIN: WASH
W/SOAP & WATER. OBTAIN MEDICAL ATTENTION IN ALL CASES.
===================== Fire Fighting Measures =====================
Extinguishing Media:WATER FOG, FOAM, CO2
Fire Fighting Procedures:WEAR PROTECTIVE CLOTHING & SELF CONTAINED
BREATHING APPARATUS.
Unusual Fire/Explosion Hazard:IRRITATING GASES MAY BE RELEASED.
Spill Release Procedures:NO SPECIAL PROCEDURES REQUIRED.
====================== Handling and Storage ======================
Handling and Storage Precautions:DON'T STORE NEAR HIGH
TEMPERATURES/IGNITION SOURCES REFRIGERATED STORAGE PROLONGS SHELF
LIFE. STORE AWAY FROM FOOD & BEVERAGES.
Other Precautions:THIS MATERIAL SHOULD BE HANDLED & USED ONLY IN A
MANNER CONSISTENT W/THE PRODUCT INSTRUCTIONS. MATERIAL IS SENSITIVE
TO VISIBLE LIGHT & WILL POLYMERIZE TO FORM A HARD PLASTIC. AVOID
FURTHER CONTACT.
Respiratory Protection:USE DUST MASK WHILE GRINDING TO AVOID BREATHING
DUST.
Ventilation:LOCAL EXHAUST WHEN GRINDING POLYMERIZED (SOLID/CURED)
MATERIAL.
Protective Gloves:LATEX/POLY VINYL CHLORINE
Eye Protection:SAFETY GLASSES WHILE GRINDING
Other Protective Equipment:NONE REQUIRED.
Work Hygienic Practices:REMOVE/LAUNDER CONTAMINATED CLOTHING BEFORE
REUSE.
Supplemental Safety and Health
Melt/Freeze Pt:M.P/F.P Text:<-40F
Vapor Pres:<1
Vapor Density:>1
Spec Gravity:1.2
Solubility in Water:NEGLIGIBLE
Appearance and Odor:FIBERED PINK DOUGHY MATERIAL IN UNCURED STATE. PINK
HARD PLASTIC WHEN CURED.
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
OXIDIZING & REDUCING CHEMICALS
Stability Condition to Avoid:HEAT, IGNITION SOURCES, SUNLIGHT
Hazardous Decomposition Products:NONE
Conditions to Avoid Polymerization:HEAT (POLYMERIZES IN 2 HOURS AT 212F
W/A LOW EXOTHERM).
Waste Disposal Methods:SPREAD OUT MATERIALS TO EXPOSE SURFACES TO
SUNLIGHT/ARTIFICIAL LIGHT UNTIL SOLID. DISPOSE OF AS NON-HAZARDOUS
WASTE IN ACCORDANCE W/LOCAL, STATE & FEDERAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.