===================== Product Identification =====================
MSDS NAME:MAGNATAC CH-16
NIIN:00F051172
MSDS Number: CCDRQ
=== Responsible Party ===
Company:BEACON CHEMICAL CO INC
Address:125 MACQUESTEN PKY S
City:MOUNT VERNON
State:NY
ZIP:10550-5000
Country:US
Info Phone Num:914-699-3400
Emergency Phone Num:914-699-3400
Preparer's Name:ROSEMARIE WILLIAMS
CAGE:5B981
=== Contractor Identification ===
Company:BEACON CHEMICAL COMPANY, INC.
Address:125 MACQUESTEN PARKWAY
Box:City:MOUNT VERNON
State:NY
ZIP:10550
Country:US
Phone:914-699-3400
CAGE:5B981
============= Composition/Information on Ingredients =============
Name:ANCAMINE 350 A (POLYAMIDE RESIN) *96-3*
CAS:88384-96-7
Fraction by Wt: 80%
Name:ETHYLENEAMINES
Fraction by Wt: 20%
===================== Hazards Identification =====================
LD50 LC50 Mixture:ORAL LD50(RAT): 2500 MG/KG
Routes of Entry: Inhalation:NO Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYES: IRRITATION. WILL CAUSE PERMANENT
DAMAGE IF NOT REMOVED PROMPTLY. SKIN: IRRITATION, DERMATITIS.
INGESTION: GI IRRITATION. CHRONIC EFFECTS-EYES: CONJUNCTIVITIS.
SKIN: SENSITIZATION DERMATITIS.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:IRRITATION, SORE THROAT, LABORED BREATHING,
ABDOMINAL PAIN, NAUSEA, VOMITING, PERFORATION OF STOMACH & TRACHEA.
======================= First Aid Measures =======================
First Aid:INHALATION: REMOVE TO FRESH AIR. EYES: FLUSH W/WATER. SKIN:
FLUSH THOROUGHLY W/SOAP & WATER. INGESTION: IF CONSCIOUS, GIVE 3
GLASSES OF WATER TO DILUTE STOMACH CONTENTS. DON'T INDUCE VOMITING.
DON'T A TTEMPT TO GIVE ANYTHING BY MOUTH TO A DROWSY/UNCONSCIOUS
PERSON. KEEP WARM & QUIET. OBTAIN MEDICAL ATTENTION IN ALL CASES.
AFTER FIRST AID, GET APPROPRIATE IN-PLANT, PARAMEDIC/COMMMUNITY
SUPPORT.
===================== Fire Fighting Measures =====================
Flash Point Method:COC
Flash Point:>300F
Lower Limits:1
Upper Limits:6.5
Extinguishing Media:WATER FOG, FOAM, CO2, DRY CHEMICAL.
Fire Fighting Procedures:WEAR SCBA W/FULL FACEPIECE OPERATED IN
PRESSURE DEMAND/POSITIVE PRESSURE MODE.
Unusual Fire/Explosion Hazard:DON'T RELEASE RUNOFF FROM FIRE CONTROL
METHODS TO SEWERS/WATERWAYS.
================== Accidental Release Measures ==================
Spill Release Procedures:TAKE UP W/SAND/OTHER ABSORBENT MATERIAL &
PLACE IN CONTAINER FOR LATER DISPOSAL. LARGE: DIKE FAR AHEAD OF
LIQUID FOR LATER DISPOSAL. DON'T RELEASE INTO SEWERS/WATERWAYS.
====================== Handling and Storage ======================
Handling and Storage Precautions:WEAR APPROPRIATE PROTECTIVE EQUIPMENT.
STORE AT ROOM TEMP, OUT OF DIRECT SUNLIGHT IN A DRY AREA. AVOID
EXCESSIVE HEAT. STORAGE TEMP IS <100F.
============= Exposure Controls/Personal Protection =============
Respiratory Protection:WEAR NIOSH/MSHA APPROVED RESPIRATORS. FOR
EMERGENCY/NONROUTINE OPERATIONS, WEAR SCBA. AIR-PURIFYING
RESPIRATORS DON'T PROTECT WORKERS IN OXYGEN-DEFICIENT ATMOSPHERES.
Ventilation:GENERAL/LOCAL EXHAUST VENTILATION TO MAINTAIN AIRBORNE
CONCENTRATIONS BELOW OSHA PELS.
Protective Gloves:CHEMICAL PROTECTIVE
Eye Protection:PROTECTIVE EYEGLASSES
Other Protective Equipment:CHEMICAL SAFETY GOGGLES, BOOTS, APRONS,
EYEWASH STATIONS, SAFETY/QUICK-DRENCH SHOWERS, WASHING FACILITIES,
GAUNTLETS
Work Hygienic Practices:REMOVE/LAUNDER CONTAMINATED CLOTHING & SHOES
BEFORE REUSE. NEVER EAT, DRINK/SMOKE IN WORK AREA.
Supplemental Safety and Health
PRACTICE GOOD PERSONAL HYGIENE AFTER USING MATERIAL & BEFORE EATING,
DRINKIING, SMOKING, USING RESTROOMS/APPLYING COSMETICS.
================== Physical/Chemical Properties ==================
Melt/Freeze Pt:M.P/F.P Text:>500F
Vapor Pres:0
Vapor Density:5
Spec Gravity:0.96
Evaporation Rate & Reference:(WATER =1): NIL
Solubility in Water:SLIGHT
Appearance and Odor:AMBER VISCOUS LIQUID W/TYPICAL AMINE ODOR
Percent Volatiles by Volume:0
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
ACIDS, EPOXY RESINS
Stability Condition to Avoid:TEMPS >100F
Hazardous Decomposition Products:FIRE: TOXIC CHEMICAL PRODUCTS.
Conditions to Avoid Polymerization:HIGH TEMP.
==================== Disposal Considerations ====================
Waste Disposal Methods:DISPOSE OF IAW/FEDERAL, STATE & LOCAL
REGULATIONS. CORROSIVE LIQUID, UN2259.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|