=====================  Product Identification  =====================

MSDS NAME:F-153 TYPE III DARK GRAY RO 1.8 COMP B #371480
NIIN:01-350-4744
Kit Part:Y
MSDS Number: CCKJX
=== Responsible Party ===
Company:AMERON INC PROTECTIVE COATINGS DIV
Address:201 N BERRY ST
City:BREA
State:CA
ZIP:92622-1020
Country:US
Info Phone Num:714-529-1951 (H. KLINE)
Emergency Phone Num:800-424-9300 CHEMTREC
CAGE:55849
=== Contractor Identification ===
Company:AMERON INTERNATIONAL PROTECTIVE COATINGS GROUP
Address:201 NORTH BERRY ST.
Box:City:BREA
State:CA
ZIP:92821
Country:US
Phone:714-529-1951
CAGE:55849

=============  Composition/Information on Ingredients  =============

Name:MAGNESIUM SILICATE (RESPIRABLE QUARTZ <0.1)
CAS:14807-96-6
RTECS #:MW2700000
Fraction by Wt: 25-45%
Other REC Limits:NONE RECOMMENDED
OSHA PEL:2.0 MG/M3
ACGIH TLV:2.0 MG/M3

Name:HIGH FLASH NAPHTHA (SARA 313)(VP = 2.7 @ 68F)(LD50=3.1
    G/KG; LC50 3670 PPM) (TRACE CONTAMINANT BENZENE <30PPM)
CAS:64742-95-6
Fraction by Wt: 11.13%
Other REC Limits:MFR REC 50 PPM
OSHA PEL:100 PPM

Name:POLYAMIDE (LC50 19.9 PPM)
Fraction by Wt: 1.32%
Other REC Limits:NONE RECOMMENDED

Name:EPOXY RESIN (VP = 0.03 @ 170F)(LD50 20 G/KG) (EPCH@<1.0 DGE
    2PPM, PGE 6PPM)
CAS:25068-38-6
RTECS #:KC2100000
Fraction by Wt: 52.59%
Other REC Limits:NONE RECOMMENDED

Name:1,2,4-TRIMETHYLBENZENE (SARA 313)(VP = 1.0 @ 68F)
CAS:95-63-6
RTECS #:DC3325000
Fraction by Wt: 8.25%
Other REC Limits:NONE RECOMMENDED
OSHA PEL:25 PPM
ACGIH TLV:25 PPM

Name:VOC = 340 G/L
RTECS #:9999999VO
Other REC Limits:NONE RECOMMENDED
OSHA PEL:NOT EST.

=====================  Hazards Identification  =====================

Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:YES
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:VAPOR/SPRAY MIST/SPATTERED MATL CAN BE
    HARMFUL. IRRIT TO EYE/SKIN/NOSE/THROAT. CHRONIC INHAL MAY CAUSE
    HEADACHE, NAUSEA DIZZINESS. OVEREXP TO SOLVENTS ASSOCIATED
    W/PERMANENT BRAIN NERVOUS SYSTEM DAMAG E. INTENTIONAL MISUSE/ABUSE
    OR OTHER MASSIVE OVEREXPOSURE TO SOLVENTS MAY CAUSE MULTIPLE-ORGAN
    DAMAGE AND/OR DEATH.**
Explanation of Carcinogenicity:NO
Effects of Overexposure:**CHRONIC:SKIN IRRIT/SENSITAZATION/ALLERGIC
    REACTIONS(RASH/HIVES), CAN BE ABSORBED (DEFATS/DRYS). EYE:IRRIT.
    INGEST:HARMFUL.ASPIRATION HAZARD.INHAL:IRRIT/LUNG INJURY/CNS
    DAMAGE/CHEM PNEMONIA. XYLENE/T OLUENE MAY CAUSE IRREGULAR
    HEARTBEAT.***
Medical Cond Aggravated by
    Exposure:KIDNEY/LIVER/SKIN/EYE/RESPIRATORY/ALLERGIES/LUNGS.

=======================  First Aid Measures  =======================

First Aid:INHAL: GET FRESH AIR, RESTORE NORMAL BREATHING, TREAT
    SYMPTOMATICALLY, SEE PHYSICIAN. SKIN: WASH W/SOAP & WATER REMOVE
    CONTAM CLOTHES CALL DR IF IRRIT PERSISTS. EYES:FLUSH W/LOTS WATER
    >15 MIN CALL DR .INGEST: DRINK 1-2 GLASSES WATER TO DILUTE NEVER
    GIVE ANYTHING BY MOUTH TO UNCONSCIOUS PERSON. DONT INDUCE VOMITING.
    CALL DR/POISON CONTROL CENTER IMMED. TREAT SYMPTOMATICALLY.

=====================  Fire Fighting Measures  =====================

Flash Point Method:SCC
Flash Point:100F,38C
Autoignition Temp:Autoignition Temp Text:NA
Lower Limits:1.0
Upper Limits:7.0
Extinguishing Media:FOAM, CARBON DIOXIDE & DRY CHEM.
Fire Fighting Procedures:WEAR FULL FIRE PROT. EQPT. SCBA, WATER MAY BE
    USED TO COOL CNTNRS TO PREVENT PRESSURE BUILDUP OR EXPLOSION WHEN
    EXPOSED TO EXTREME HEAT.
Unusual Fire/Explosion Hazard:CLSD CNTNRS EXPLODE (EXPOSED EXTREME
    HEAT/PRESSURE BUILDUP).MAY PRODUCE FLOATING FIRE HZD. KEEP FROM
    IGNIT SOURCES. VAPORS TRAVEL (FLASH FIRE/IGNITE/EXPLODE).

==================  Accidental Release Measures  ==================

Spill Release Procedures:REMOVE IGNIT SOURCES, AVOID BREATHING VAPORS.
    VENTILATE AREA USE ABSORBENT/INERT/CLEANUP MATLS. DO NOT USE
    SAWDUST.REMOVE ABSORBENT MATL W/NONSPARKING TOOLS. PUT IN SEPARATE
    CNTNRS/KEEP FROM SEWERS/WA TERWAYS. IF ENTRY THREAT/OCCURS CALL
    AUTHORITIES.

======================	Handling and Storage  ======================

Handling and Storage Precautions:KEEP CONTAINER CLOSED/UPRIGHT WHEN NOT
    IN USE. STORE IN COOL, DRY WELL VENTILATED AREA. AVOID PROLONGED
    STORAGE >100F.
Other Precautions:NK *****Z49.1 "SAFTEY IN WELDING AND CUTTING".REFER
    TO 29 CFR 1910 & 1915. FOR COATING OPPERATIONS; PART 1910.146 FOR
    CONFINED SPACES.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:WEAR NIOSH/MSHA RESPIRATOR DESIGNED TO REMOVE
    PARTICULATES/VAPORS. WHEN BRUSH/ROLLING/SREADING USE RESP PROT FOR
    SPECIFIC CONDITIONS. REFER TO NIOSH POCKET GUIDE TO CHEM HAZ. IN
    CONFINED/RESTRICTED VE NT AREA USE AIRLINE RESP OR HOODS. ****
Ventilation:USE ADMIN/ENGINEERING CNTRLS TO REDUCE EXPOS.PROVIDE VENT
    (AIR
pH:NA
Evaporation Rate & Reference:0.1 (BUAC=1)
Solubility in Water:NA
Appearance and Odor:LIQUID W/SOLVENT ODOR.
Percent Volatiles by Volume:29.9
Corrosion Rate:NA

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS ACIDS & ALKALIES.
Stability Condition to Avoid:HEAT/OPEN FLAME ARC OR SPARK,
Hazardous Decomposition Products:CO, CO2, NOX, ALDEHYDES.

====================  Disposal Considerations  ====================

Waste Disposal Methods:PLACE IN SEPARATE/CLSD CNTNR IN ACCORDANCE
    W/LOCAL/STATE/FED REGS. MATL HAS NOT BEEN TESTED BY TOXICITY
    CHARACTERISTIC LEACHING PROCEDURE (TCLP). EPA WASTE D001, D080.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.

*** END OF RECORD ***