=====================  Product Identification  =====================

MSDS NAME:TOP PERFORMANCE TWO-CYLCE ENGINE OIL
NIIN:00-082-7535
MSDS Number: CDGGP
=== Responsible Party ===
Company:SPECTRUM CORP
Address:FULGHUM ST
Box:130
City:HORNSBY
State:TN
ZIP:38044
Country:US
Info Phone Num:901-658-9050
Emergency Phone Num:901-658-9050
CAGE:1EE17
=== Contractor Identification ===
Company:BALKAMP INC
Address:2601 S HOLT ROAD
Box:City:INDIANAPOLIS
State:IN
ZIP:46241
Country:US
Phone:317-244-7241
CAGE:70842
Company:NAPA, A DIVISION OF LINCOLN AUTOMOTIVE
Address:ONE LINCOLN WAY
Box:City:ST. LOUIS
State:MO
ZIP:63120-1578
Country:US
Phone:414-255-5520
CAGE:050Q3
Company:SPECTRUM CORP
Address:FULGHUM ST
Box:130
City:HORNSBY
State:TN
ZIP:38044
Country:US
CAGE:1EE17

=============  Composition/Information on Ingredients  =============

Name:COMPLEX MIXTURE OF PETROLEUM HYDROCARBONS
Other REC Limits:NONE RECOMMENDED
OSHA PEL:5 MG/M3 (OIL MIST)
ACGIH TLV:5 MG/M3 (OIL MIST)

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:YES
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:INHAL:FUMES MAY RESULT IN
    DIZZ,HEAD,RESP IRRIT.EYE:CONTACT MAY CAUSE MINIMAL IRRIT.SKIN:MILD
    IRRIT MAY OCCUR W/PROLONGED/REPEATED CONTACT.INGEST:SLIGHTLY
    TOXIC.PULMONARY ASPIRATION HAZARD IF VOMITING  OCCURS.CHRONIC
    EFFECTS:PRODUCT HAS LOW ORDER OF ACUTE ORAL TOXICITY.
Effects of Overexposure:DIZZ, HEADACHE, RESPIRATORY IRRIT, MIN EYE
    IRRIT, MILD SKIN IRRIT, INGEST SLIGHTLY TOXIC. PULMONARY ASPIRATION
    HAZ IF VOMIT.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

=======================  First Aid Measures  =======================

First Aid:SKIN:WASH W/SOAP/WARM WATER.EYE:IF SPLASH INTO EYES FLUSH
    W/CLEAR WATER FOR 5MINS.INHAL:IF OVERCOME BY FUMES REMOVE FROM
    EXPOSURE IMMED.ORAL:INF INGEST DO NOT INDUCE VOMIT.CALL PHYSICIAN.

=====================  Fire Fighting Measures  =====================

Flash Point:425F,218C
Autoignition Temp:Autoignition Temp Text:NP
Lower Limits:NO DATA
Upper Limits:NO DATA
Extinguishing Media:WATER FOG, CHEMICAL FOAM, DRY CHEMICAL POWDER, CO2.
Fire Fighting Procedures:COOL EXPOSED CONTAINERS W/WATER SPRAY.AVOID
    BREATING FUMES.
Unusual Fire/Explosion Hazard:PRESSURE INCREASE IN OVER HEATED, CLOSED
    CONTAINERS.COOL CONTAINERS W/WATER SPRAY.

==================  Accidental Release Measures  ==================

Spill Release Procedures:REMOVE IGN SOURCES.RECOVER LIQ.ADD ABSORBENT
    TO SPILL AREA.VENTILATE CONFINED SPACES.ADVISE AUTHORITIES IF
    PRODUCT ENTERS SEWERS/ETC.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:KEEP CNTNRS CLSD WHEN NOT IN USE.DO
    NOT HANDLE/STORE NEAR HEAT OR FLAMES.USE CHEMICAL RESISTANT GLOVES
    & APRON.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:NONE SPECIFIED BY MANUFACTURER.
Ventilation:VENTILATE AS NEEDED TO COMPLY W/EXPOSURE LIMIT.
Protective Gloves:IMPERVIOUS GLOVES.
Eye Protection:GOGGLES/FACE SHIELD.
Other Protective Equipment:APRON.
Work Hygienic Practices:IF CLOTHING BECOMES CONTAMINATED CHANGE TO
    FRESH CLEAN CLOTHING.DO NOT WEAR TIL THOROUGHLY LAUNDERED.
Supplemental Safety and Health

==================  Physical/Chemical Properties  ==================

HCC:V6
Boiling Pt:B.P. Text:600F,316C
Melt/Freeze Pt:M.P/F.P Text:NP
Decomp Temp:Decomp Text:NP
Vapor Pres:<1
Vapor Density:1+
Spec Gravity:0.93
pH:NP
Viscosity:NP
Evaporation Rate & Reference:<1, BUAC=1.
Solubility in Water:NEGLIGIBLE.
Appearance and Odor:HYDROCARBON ODOR, DARK GREEN COLOR.
Percent Volatiles by Volume:NP
Corrosion Rate:NP

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
AVOID STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:PARTIAL BURNING PRODUCES FUMES, SMOKE,
    CARBON MONOXIDE.

====================  Disposal Considerations  ====================

Waste Disposal Methods:ASSURE CONFORMITY W/APPLICABLE DISPOSAL
    REGULATIONS.DISPO OF ABSORBED AMTL AT APPROVED WASTE SITE.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.

*** END OF RECORD ***