=====================  Product Identification  =====================

MSDS NAME:450 & 452 PERMAPLASTIK
NIIN:00-236-4946
MSDS Number: CDPGB
=== Responsible Party ===
Company:REPUBLIC POWDERED METALS INC
Address:2628 PEARL RD
Box:724
City:MEDINA
State:OH
ZIP:44258
Country:US
Info Phone Num:800-225-1136/216-273-5061
Emergency Phone Num:800-225-1136
CAGE:92414
=== Contractor Identification ===
Company:REPUBLIC POWDERED METALS INC
Address:2628 PEARL ROAD
Box:724
City:MEDINA
State:OH
ZIP:44256
Country:US
Phone:330-225-3192; 800-255-1136
CAGE:92414

=============  Composition/Information on Ingredients  =============

Name:ASPHALT
CAS:8052-42-4
RTECS #:CI9900000
OSHA PEL:5 MG/M3

Name:MINERAL SPIRITS
CAS:64742-88-7
OSHA PEL:500 PPM
ACGIH TLV:100 PPM

Name:MAGNESIUM ALUMINUM SILICATE
CAS:8031-18-3
Other REC Limits:NONE RECOMMENDED
ACGIH TLV:10 MG/M3

Name:TRADESECRET FILLER
Other REC Limits:NONE RECOMMENDED

=====================  Hazards Identification  =====================

Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:YES
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:EYES: IRRITATION. SKIN: IRRITATION &
    DERMATITIS. INHALATION: NASAL IRRITATION, DIZZY, NAUSEA,
    ASPHYXIATION. INGESTION: TOXIC EFFECTS POSSIBLE, CAN CAUSE GI
    PROBLEMS.

=======================  First Aid Measures  =======================

Eyes: FLUSH W/PLENTY OF WATER. GET MED AID. SKIN: WASH W/SOAP
    & WATER. LAUNDER CONTAM CLOTHES. INHALATION: REMOVE TO FRESH AIR.
    ADMINISTER ARTIFICIAL RESPIRATION IF BREATHING STOPS. GET MED AID.
    INGES TION: DON'T INDUCE VOMITING. ASPIRATIONHAZARD. GIVE WATER.
    CALL DR.

=====================  Fire Fighting Measures  =====================

Flash Point Method:TCC
Flash Point:105F,41C
Lower Limits:1.0%
Extinguishing Media:FOAM, CO2, DRY CHEMICAL.
Fire Fighting Procedures:WEAR SELF-CONTAINED BREATHING APPARATUS. DONT
    DIRECT WATER ONTO HOT ASPHALT.
Unusual Fire/Explosion Hazard:VAPOR HEAVIER THAN AIR-MAY ACCUMULATE IN
    LOWER AREAS & EXPLODE IF IGNITED.

==================  Accidental Release Measures  ==================

Spill Release Procedures:REMOVE IGNITION SOURCES. CONFINE SPILL. ADD
    ABSORBENT TO SPILL. AVOID BREATHING FUMES. WEAR APPROPRIATE
    RESPIRATOR. VENTILATE AREA.

======================	Handling and Storage  ======================

Handling and Storage Precautions:KEEP AWAY FROM IGNITS. KEEP CONTAINER
    CLOSED WHEN NOT IN USE. USE W/ADEQUATE VENTILATION. STORE AS
    COMBUSTIBLE MATERIAL.
Other Precautions:DON'T USE EMPTY CONTAINERS FOR OTHER PURPOSES.
    RESIDUAL VAPORS IN DRUM MAY BE EXPLOSIVE IF IGNITED & ARE
    HAZARDOUS. DON'T USE CUTTING TORCH ON EMPTY CONTAINERS. KEEP OUT OF
    REACH OF CHILDREN.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:SCBA FOR CONCENTRATIONS GREATER THAN TLV.
Ventilation:REQUIRED IF CONDITIONS EXIST THAT PERMIT HIGH VAPOR
    CONCENTRATIONS IN AIR.
Protective Gloves:OIL RESISTANT
Eye Protection:CHEMICAL SPLASH-PROOF GOGGLES
Other Protective Equipment:PROTECTIVE CLOTHING & SHOES
Work Hygienic Practices:WASH HANDS W/SOAP & WATER AFTER USING.
Supplemental Safety and Health
REPORTS ASSOCIATE CHRONIC OVEREXPOSURE TO SOLVENTS W/PERMANENT BRAIN/NS
    DAMAGE. CONCENTRATING/INHALING CONTENTS MAY BE HARMFUL OR FATAL.

==================  Physical/Chemical Properties  ==================

Boiling Pt:B.P. Text:311F,155C
Vapor Pres:6.0
Vapor Density:4.8
Spec Gravity:1.179
Evaporation Rate & Reference:SLOWER THAN BU-AC
Solubility in Water:INSOLUBLE
Appearance and Odor:BLACK VISCOUS LIQUID W/MILD PETROLEUM ODOR
Percent Volatiles by Volume:35.6

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:HEAT, SPARKS, OPEN FLAME. STATIC
    ELECTRICITY.

====================  Disposal Considerations  ====================

Waste Disposal Methods:DISPOSE AT APPROVED SITE UNDER RCRA REGULATIONS
    FOR HAZARDOUS WASTE.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.

*** END OF RECORD ***