===================== Product Identification =====================
MSDS NAME:EPOXY METAL REPAIR COMPOUND
NIIN:00-051-4011
Kit Part:Y
MSDS Number: CDXPT
=== Responsible Party ===
Company:UNITED RESIN CORPORATION
Address:4359 NORMANDY COURT
City:ROYAL OAK,
State:MI
ZIP:48073
Country:US
Info Phone Num:810-549-8200
Emergency Phone Num:810-549-8200
CAGE:1FD35
=== Contractor Identification ===
Company:UNITED RESIN CORPORATION
Address:4359 NORMANDY COURT
City:ROYAL OAK
State:MI
ZIP:48073
Country:US
Phone:248-549-8200/
CAGE:1FD35
============= Composition/Information on Ingredients =============
Name:DGBA EPOXY RESINS
CAS:25068-38-6
RTECS #:SL6475000
Other REC Limits:NONE RECOMMENDED
Name:VOC = 11.98 LB/GL
RTECS #:9999999VO
Other REC Limits:NONE RECOMMENDED
OSHA PEL:NOT RELEVANT
ACGIH TLV:NOT RELEVANT
===================== Hazards Identification =====================
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:SKIN: MODERATE IRRIT, ALLERGIC SKIN
REACTION. EYE: MODERATELY IRRITATING.
======================= First Aid Measures =======================
First Aid:INHAL: REMOVE TO FRESH AIR. EYE: FLUSH W/GENEROUS AMOUNTS
WATER >15 MINUTES, GET MED AID. SKIN: WASH THOROUGHLY W/SOAP &
WATER.
===================== Fire Fighting Measures =====================
Lower Limits:NE
Upper Limits:NE
Extinguishing Media:WATER FOG, FOAM, DRY CHEMICAL, CO2.
Fire Fighting Procedures:USE FULL PROTECTIVE GEAR INCLUDING POSITIVE
PRESSURE SCBA, NIOSH APPROVED, COOL FIRE EXPOSED CONTAINER W/WATER.
Unusual Fire/Explosion Hazard:COOL CONTAINER W/WATER TO PREVENT
PRESSURE BUILDUP/CONTAINER WEAKENING.
================== Accidental Release Measures ==================
Spill Release Procedures:SMALL: COLLECT W/ABSORBENT. LARGE: DIKE
W/ABSORBENT, FLUSH AREA W/WATER, SPRAY TO REMOVE RESIDUE, DISPOSE
OF LEGALLY.
====================== Handling and Storage ======================
Handling and Storage Precautions:STORE AT AMBIENT TEMPERATURE IN WELL
VENTED AREA, NO IGNITS, OR AMINE CURING AGENTS. PROTECT FROM
PHYSICAL DAMAGE.
Other Precautions:CONTAINERS RETAIN RESIDUE.
============= Exposure Controls/Personal Protection =============
Respiratory Protection:NONE NEEDED.
Ventilation:LOCAL EXHAUST RECOMMENDED, MECHANICAL EXHAUST CAN BE USED
AS A BACKUP SYSTEM.
Protective Gloves:CHEMICAL RESISTANT (PVA).
Eye Protection:SAFETY GLASSES/GOGGLES W/SIDE SHIELDS.
Other Protective Equipment:CHEMICAL RESISTANT CLOTHES.
Supplemental Safety and Health
NK
================== Physical/Chemical Properties ==================
Boiling Pt:B.P. Text:>500F,>260C
Decomp Temp:Decomp Text:NA
Vapor Pres:0.02 @ 77C
Vapor Density:NA
Spec Gravity:1.44
Evaporation Rate & Reference:NA
Solubility in Water:NEGLIGIBLE
Appearance and Odor:BLACK PASTE
Percent Volatiles by Volume:0.0
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS, STRONG ACIDS & BASES, SECONDARY ALIPHATIC
AMINES & MERCAPTINS.
Stability Condition to Avoid:HIGH TEMPS/OPEN FLAME/UNSCHEDULED CONTACT
W/CURING AGENT.
Hazardous Decomposition Products:CARBON DIOXIDE, CARBON MONOXIDE,
ALDEHYDES, ACIDS, OTHER ORGANIC SUBSTANCES.
Conditions to Avoid Polymerization:MIXING RESIN & HARDENER IN
UNCONTROLLABLE QUANTITIES.
==================== Disposal Considerations ====================
Waste Disposal Methods:IN ACCORDANCE W/LOCAL/STATE/FEDERAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|