===================== Product Identification =====================
MSDS NAME:DAP 1012 GLAZING
NIIN:00-823-7921
MSDS Number: CDXTS
=== Responsible Party ===
Company:DAP INC
Box:277
City:DAYTON
State:OH
ZIP:45401
Country:US
Info Phone Num:800-543-3840
Emergency Phone Num:800-535-5053; 800-543-3840
CAGE:90300
=== Contractor Identification ===
Company:DAP INC.
Box:277
City:DAYTON
State:OH
ZIP:45401-0277
Country:US
Phone:513-253-7154/800-543-3840
CAGE:90300
============= Composition/Information on Ingredients =============
Name:MINERAL SPIRITS
CAS:8052-41-3
RTECS #:WJ8925000
Fraction by Wt: 1-5%
Other REC Limits:NONE RECOMMENDED
OSHA PEL:100 PPM
ACGIH TLV:100 PPM
Name:HYDROUS MAGNESIUM SILICATE
CAS:14807-96-6
RTECS #:WW2710000
Other REC Limits:NONE RECOMMENDED
Name:VOC = 48 G/L
RTECS #:9999999VO
Other REC Limits:NONE RECOMMENDED
===================== Hazards Identification =====================
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE EFFECTS: MAY IRRITATE EYES,
SKIN, NOSE & RESPIRATORY TRACT. HARMFUL IF INHALED. HARMFUL OR
FATAL IF SWALLOWED. IF INGESTED, THIS PRODUCT MAY CAUSE VOMITING,
DIARRHEA, & DEPRESSED RESPIRATION. IN HALATION MAY AFFECT THE BRAIN
OR NERVOUS SYSTEM CAUSING DIZZINESS, HEADACHE, NAUSEA.
Effects of Overexposure:CHRONIC: REPORTS HAVE ASSOCIATED PERMANENT
BRAIN & NERVOUS SYSTEM DAMAGE WITH PROLONGED AND REPEATED
OCCUPATIONAL OVEREXPOSURE TO SOLVENTS. PROLONGED OR REPEATED
CONTACT WITH SKIN MAY CAUSE IRRITATION .
======================= First Aid Measures =======================
First Aid:EYE CONTACT: FLUSH WITH LARGE AMOUNTS OF WATER FOR 15
MINUTES. CONTACT A PHYSICIAN IMMEDIATELY. SKIN CONTACT: WASH WITH
SOAP AND WATER. INHALATION: REMOVE TO FRESH AIR. CONTACT A
PHYSICIAN IMMEDIATELY . INGESTION: DO NOT INDUCE VOMITING. CALL DR.
===================== Fire Fighting Measures =====================
Flash Point Method:CC
Flash Point:194F,90C
Extinguishing Media:FOAM, CARBON DIOXIDE, DRY CHEMICALS
Fire Fighting Procedures:FULL PROTECTIVE EQUIPMENT, INCLUDING SCBA, IS
RECOMMENDED TO PROTECT FROM COMBUSTION PRODUCTS. COOL EXPOSED
CONTAINERS WITH WATER
Unusual Fire/Explosion Hazard:CONTAINER MAY EXPLODE W/EXTREME HEAT.
ELIMINATE IGNITION SOURCES. DONT PUT IN CONTACT W/OXIDIZERS OR
CAUSTIC MATERIAL
================== Accidental Release Measures ==================
Spill Release Procedures:SCRAPE UP DRIED MATERIAL AND PLACE INTO
CONTAINERS.
====================== Handling and Storage ======================
Handling and Storage Precautions:STORE AWAY FROM CAUSTICS AND
OXIDIZERS. KEEP OUT OF REACH OF CHILDREN. KEEP CONTAINERS FROM
EXCESSIVE HEAT AND FREEZING.
Other Precautions:KEEP CONTAINERS TIGHTLY CLOSED WHEN NOT IN USE. DO
NOT STORE AT TEMPERATURES ABOVE 120F. INTENTIONAL MISUSE BY
DELIBERATELY CONCENTRATING AND INHALING VAPOR MAY BE HARMFUL OR
FATAL.
============= Exposure Controls/Personal Protection =============
Respiratory Protection:IF 8 HOUR EXPOSURE LIMIT OR VALUE IS EXCEEDED
FOR ANY COMPONENT, USE AN APPROVED NIOSH/OSHA RESPIRATOR. CONSULT
YOUR SAFETY EQUIPMENT SUPPLIER AND THE OSHA REGULATION, 29 CFR
1910.134 FOR RESPIRATOR R EQUIREMENTS.
Ventilation:PROVED SUFFICIENT MECHANICAL VENT (LOCAL OR GENERAL
EXHAUST) TO MAINTAIN EXPOSURE BELOW PEL/TLV.
Protective Gloves:IMPERVIOUS GLOVES RECOMMENDED
Eye Protection:SAFETY GLASSES ARE RECOMMENDED
Other Protective Equipment:PROVIDE EYEWASH AND SOLVENT IMPERVIOUS APRON
IF BODY CONTACT WITH PRODUCT MAY OCCUR. BARRIER CREAMS MAY BE USED.
Work Hygienic Practices:WASH CONTAMINATED CLOTHING BEFORE REUSE.
Supplemental Safety and Health
NK
================== Physical/Chemical Properties ==================
Boiling Pt:B.P. Text:>325F,>163C
Vapor Pres:3.1
Vapor Density:>1.0
Spec Gravity:2.2 (WATER=1)
Evaporation Rate & Reference:<1.0 (BU AC=1)
Solubility in Water:NEGLIGIBLE
Appearance and Odor:COLORED PASTE WITH A MILD ODOR
Percent Volatiles by Volume:1-5
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS AND CAUSTICS
Stability Condition to Avoid:EXCESSIVE HEAT
Hazardous Decomposition Products:COX, NOX
Conditions to Avoid Polymerization:EXCESSIVE HEAT.
==================== Disposal Considerations ====================
Waste Disposal Methods:DISPOSE OF ACCORDING TO FEDERAL, STATE, AND
LOCAL REGULATIONS. DO NOT REUSE EMPTY CONTAINERS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|