===================== Product Identification =====================
MSDS NAME:PC-216 LIGHT STABLE ACTIVATOR
NIIN:00F040534
MSDS Number: CFBQM
=== Responsible Party ===
Company:DEXTER CORP PACKAGING PRODUCTS DIV
Address:1 EAST WATER ST
City:WAUKEGAN
State:IL
ZIP:60085-5614
Country:US
Info Phone Num:847-623-4200
Emergency Phone Num:847-623-4200
CAGE:91342
=== Contractor Identification ===
Company:DEXTER CORP THE PACKAGING PRODUCTS DIV
Address:1-7 E WATER ST
Box:City:WAUKEGAN
State:IL
ZIP:60085-5614
Country:US
Phone:847-623-4200
CAGE:91342
============= Composition/Information on Ingredients =============
Name:ALIPHATIC POLYISOCYANATE, HEXAMETHYLENE DIISOCYANATE
POLYMER *96-3*
CAS:3779-63-3
Fraction by Wt: 70-80%
Name:BUTYL ACETATE (N-BUTYL ACETATE) *96-3*
CAS:123-86-4
RTECS #:AF7350000
Fraction by Wt: 20-30%
Other REC Limits:150 PPM
OSHA PEL:710 MG/CUM
ACGIH TLV:713 MG/CUM
EPA Rpt Qty:5000 LBS
DOT Rpt Qty:5000 LBS
===================== Hazards Identification =====================
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHALATION: OVEREXPOSURE MAY CAUSE
IRRITATION OF THE RESPIRATORY TRACT. IRRITANT TO EYES & SKIN, SKIN
SENSITIVITY. MAY BE ABSORBED THRU THE EYES, INHALATION, SKIN &
INGESTION. MAY AFFECT CNS, CAUSE AL LERGIC RESPIRATORY/SKIN
REACTIONS.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:IRRITATION, HEADACHE, DIZZINESS, DROWSINESS
Medical Cond Aggravated by Exposure:RESPIRATORY PROBLEMS.
======================= First Aid Measures =======================
First Aid:INHALATION: REMOVE FROM EXPOSURE. EYES: FLUSH IMMEDIATELY
W/LARGE AMOUNTS OF RUNNING WATER FOR 15 MINS. SKIN: WASH W/SOAP &
WATER. INGESTION: DRINK WATER. OBTAIN MEDICAL ATTENTION IN ALL
CASES.
===================== Fire Fighting Measures =====================
Flash Point Method:SCC
Flash Point:90F
Lower Limits:1.7
Extinguishing Media:WATER FOG, FOAM, DRY CHEMICAL/CO2
================== Accidental Release Measures ==================
Spill Release Procedures:REMOVE SOURCES OF IGNITION. AVOID BREATHING
VAPORS. VENTILATE AREA & REMOVE W/INERT ABSORBENT & NON-SPARKING
TOOLS.
====================== Handling and Storage ======================
Handling and Storage Precautions:CONTAINERS SHOULD BE GROUNDED WHEN
POURING. THE DRUM SHOULD BE INDUSTRIALLY CLEANED PRIOR TO REUSE.
DON'T TAKE INTERNALLY.
Other Precautions:AVOID FREE FALL OF LIQUID IN EXCESS OF A FEW INCHES.
MAKE SURE THE DRUM IS COMPLETELY EMPTY BEFORE ATTEMPTING TO
WELD/BRAZE. DON'T FLAME CUT, BRAZE/WELD W/O A NIOSH APPROVED
RESPIRATOR/APPROPRIATE VEN TILATION.
============= Exposure Controls/Personal Protection =============
Respiratory Protection:WHERE GENERAL/LOCAL EXHAUST FAILS TO DILUTE THE
TWA/PEL, WEAR A PROPERLY FITTED RESPIRATOR APPROVED BY NIOSH/OSHA.
AN AIRLINE RESPIRATOR (TC19C NIOSH/MSHA) IS RECOMMENDED.
VAPOR/PARTICULATE RESPIRATOR (TC23C NIOSH/MSHA)-AIRBORNE
MONITORING.
Ventilation:GENERAL DILUTION/LOCAL EXHAUST TO KEEP TWA & LEL
1
VOC Grams/Liter:2.4
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:NO
WATER/WATER CONTAINING PRODUCTS
Stability Condition to Avoid:IGNITION SOURCES
Hazardous Decomposition Products:CO, OXIDES OF NITROGEN
==================== Disposal Considerations ====================
Waste Disposal Methods:DISPOSE OF IN ACCORDANCE W/LOCAL, STATE &
FEDERAL REGULATIONS.
======================= Other Information =======================
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|