=====================  Product Identification  =====================

MSDS NAME:MILR19907D PASTE RESIN PART A BOATKITPR
NIIN:00-372-6064
Kit Part:Y
MSDS Number: CGSXF
=== Responsible Party ===
Company:BONDED PRODUCTS INC
Address:439 S BOLMAR ST
Box:39
City:WEST CHESTER
State:PA
ZIP:19381-0039
Country:US
Info Phone Num:610-696-9220
Emergency Phone Num:610-696-9220
Preparer's Name:JOHN BARTUSIAK
CAGE:19092
=== Contractor Identification ===
Company:ABBEY COLOR INC DBA ABBEY PRODUCTS AND BONDED
Address:400 E TIOGA ST
Box:City:PHILADELPHIA
State:PA
ZIP:19134-1127
Country:US
Phone:215-739-9960
CAGE:19092

=============  Composition/Information on Ingredients  =============

Name:EPOXY RESIN; (EPOXIDE RESIN)
CAS:25068-38-6
RTECS #:KC2100000
OSHA PEL:N/K 
ACGIH TLV:N/K 

Name:2(3H)-FURANONE, DIHYDRO-; (GAMMA-BUTYROLACTONE). VP:1 @
    68F.
CAS:96-48-0
RTECS #:LU3500000
OSHA PEL:N/K 
ACGIH TLV:N/K 

Name:TITANIUM OXIDE; (TITANIUM DIOXIDE)
CAS:13463-67-7
RTECS #:XR2275000
OSHA PEL:15 MG/M3 TDUST
ACGIH TLV:10 MG/M3 TDUST

Name:CLAY (KAOLIN); (HYDRATED ALUMINUM SILICATE)
CAS:1332-58-7
RTECS #:GF1670500
OSHA PEL:15 MG/M3 TDUST
ACGIH TLV:2 MG/M3 TDUST

Name:CALCIUM CARBONATE
CAS:1317-65-3
RTECS #:EV9580000
OSHA PEL:15 MG/M3 TDUST
ACGIH TLV:10 MG/M3 TDUST

Name:MILLED GLASS 9007 1-32; (MILLED GLASS)
OSHA PEL:N/K 
ACGIH TLV:10 MG/M3 (MFR)

Name:SILICON DIOXIDE (AMORPHOUS); (SILICON DIOXIDE, AMORPHOUS)
CAS:67762-90-7
OSHA PEL:6 MG/M3
ACGIH TLV:10 MG/M3

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:YES
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:INHALATION: CAN CAUSE IRRITATION TO
    NOSE, THROAT AND LUNGS. CAN CAUSE HEADACHE ON PROLONGED EXPOSURE.
    SKIN AND EYE CONTACT: PRIMARY IRRITATION ON PROLONGED OR REPEATED
    CONTACT. CAN BE IRRITATING. PROL ONGED OR REPEATED CONTACT CAN
    CAUSE SENSITIZATION. SKIN ABSORPTION: IRRITATION. INGEST: HEALTH
    RISKS (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:HEALTH HAZARDS: ARE NOT USUAL. SYMPTOM IS
    ABDOMINAL DISCOMFORT IF INGESTED.
Medical Cond Aggravated by Exposure:SKIN ABRASIONS AND HEAD COLDS.

=======================  First Aid Measures  =======================

First Aid:INHAL: REMOVE VICTIM TO FRESH AIR. GIVE OXYGEN, APPLY
    ARTIFICIAL RESPIRATION IF REQUIRED. GET MEDICAL HELP. SKIN: WASH
    THOROUGHLY WITH SOAP AND WATER. IF IRRITATION PERSISTS, GET MEDICAL
    ATTENTION. EY ES: FLUSH WITH WATER FOR AT LEAST 15 MINUTES. GET
    MD'S ASSISTANCE. INGESTION: INDUCE VOMITING IF CONSCIOUS. GET
    MEDICAL ASSISTANCE IMMEDIATELY.

=====================  Fire Fighting Measures  =====================

Flash Point Method:COC
Flash Point:>240F,>116C
Extinguishing Media:FOAM, CO*2 DRY CHEMICAL, WATER FOG.
Fire Fighting Procedures:USE NIOSH APPROVED SCBA & FULL PROTECTIVE
    EQUIPMENT . REMAIN UPWIND FROM FIRE. SPRAY WATER ON CONTAINERS
    EXPOSED TO FIRE.
Unusual Fire/Explosion Hazard:HANDLE PRODUCT AS A COMBUSTIBLE MATERIAL
    WHEN EXPOSED TO BURNING OR FIRE. CONTAINERS EXPOSED TO HIGH
    TEMPERATURES CAN BURST.

==================  Accidental Release Measures  ==================

Spill Release Procedures:CONTAIN SPILL. WEAR NIOSH APPROVED RESPIRATORY
    EQUIPMENT & NECESSARY EQUIPMENT TO PROTECT SKIN AND EYE CONTACT.
    GUARD AGAINST FIRE HAZARDS & REMOVE SOURCES OF IGNITION. SHOVEL OR
    SCRAPE INTO SALVAGE D RUMS. SOAK UP RESIDUE WITH ABSORBENT
    MATERIAL.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:STORE IN TIGHTLY CLOSED CONTAINERS IN
    A COOL, DRY AREA. WORK IN A WELL VENTILATED AREA. USE PROTECTIVE
    CLOTHING. AVOID CONTACT W/EYES, SKIN & CLTHG.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:NIOSH APPROVED RESPIRATORY EQUIPMENT AS REQUIRED
    TO PREVENT VAPOR EXPOSURE.
Ventilation:LOCAL: APPLICATION AS NEEDED TO CONTROL VAPOR EXPOSURE AWAY
    FROM OPERATOR. MECHANICAL: RECOMMENDED.
Protective Gloves:IMPERVIOUS GLOVES.
Eye Protection:ANSI APPROVED CHEM WORKERS GOGGS(SUPDAT)
Other Protective Equipment:ANSI APPROVED EYE WASH FOUNTAIN AND DELUGE
    SHOWER . IMPERVIOUS PROT GARMENTS TO PREVENT CLOTHING AND BODY
    CONTACT.
Work Hygienic Practices:WASH EXPOS SKIN AREAS W/SOAP & WATER AFTER
    USING PROD & BEFORE EATING. REMOVE CONTAM CLTHG & LAUNDER BEFORE
    (SUPP DATA)
Supplemental Safety and Health
EYE PROT: AND FULL LENGTH FACESHIELD . HYGIENE PRACT: REUSE. DESTROY
    CONTAMINATED SHOES AND OTHER LEATHER ARTICLES.

==================  Physical/Chemical Properties  ==================

Vapor Pres:SEE ING 2
Evaporation Rate & Reference:NOT APPLICABLE.
Solubility in Water:VERY SLIGHT.
Appearance and Odor:WHITE PASTE WITH CHARACTERISTIC ODOR.

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
OXIDIZING AGENTS AND MINERAL ACIDS.
Stability Condition to Avoid:HIGH TEMPERATURES.
Hazardous Decomposition Products:CARBON MONOXIDE, CARBON DIOXIDE &
    SMOKE.

====================  Disposal Considerations  ====================

Waste Disposal Methods:REACT THIS PART A WITH PART B. BURN IN AN
    APPROVED INCINERATOR OR BURY IN AN APPROVED LANDFILL THAT MEETS
    FEDERAL, STATE AND LOCAL REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.

*** END OF RECORD ***