===================== Product Identification =====================
MSDS NAME:EC-801 (B4) FILLETING SEALANT
NIIN:00-322-6928
MSDS Number: BDWSX
=== Responsible Party ===
Company:3M COMPANY
Address:3M CENTER
City:ST. PAUL
State:MN
ZIP:55144-1000
Country:US
Info Phone Num:612-733-1110
Emergency Phone Num:612-733-1110
CAGE:76381
=== Contractor Identification ===
Company:3M MINNESOTA MINING AND MFG CO ADHESIVES SEALERS DIV
Address:3M CTR
Box:City:SAINT PAUL
State:MN
ZIP:55144-1000
Country:US
Phone:800-364-3577/651-737-6501(24 HOURS)
CAGE:04963
Company:MINNESOTA MINING AND MFG CO, DBA 3M
Address:3M CENTER BLDG 224-5S-04
Box:City:SAINT PAUL
State:MN
ZIP:55144-1000
Country:US
Phone:866-556 5712 / 612-733-1110
CAGE:76381
============= Composition/Information on Ingredients =============
Name:CARBON BLACK
CAS:1333-86-4
RTECS #:FF5800000
Fraction by Wt: UNK
OSHA PEL:3.5 MG/M3
ACGIH TLV:3.5 MG/M3; 9192
Name:POLYSULFIDE RUBBER
Fraction by Wt: UNK
Name:PHENOLIC RESIN
Fraction by Wt: UNK
ACGIH TLV:UNKNWON
Name:PETROLEUM BASE SOLVENT
Fraction by Wt: 3.0%
Name:MAGNESIUM ACETATE
CAS:142-72-3
RTECS #:AI5600000
Fraction by Wt: UNK
===================== Hazards Identification =====================
Effects of Overexposure:EYE: IRRIT. SKIN: DEFATTING/DERMATITIS. VAPORS:
HEADACHE,NAUSEA & VOMITING.
======================= First Aid Measures =======================
First Aid:EYE: FLUSH WITH WATER 15 MIN,CALL PHYSICIAN. SKIN: WASH WITH
SOAP AND WATER. INHALATION: REMOVE TO FRESH AIR.
===================== Fire Fighting Measures =====================
Flash Point:>100F/37C
Extinguishing Media:CO2,FOAM,DRY CHEM
================== Accidental Release Measures ==================
Spill Release Procedures:CONTAIN SPILL. CLEAN UP RESIDUE AND AREA OF
SPILL. PLACE RESIDUE IN CONTAINER.
====================== Handling and Storage ======================
Handling and Storage Precautions:AVOID EYE CONTACT.AVOID PROLONGED
BREATHING OF VAPOR AND PROLONG OR REPEATED SKIN DONTACT. KEEP
CONTANER CLOSED WHEN NOT IS USE.
============= Exposure Controls/Personal Protection =============
Ventilation:MECHANICAL
Eye Protection:SAFETY GLASSES
Supplemental Safety and Health
OTHER P/N: SCOTCHSEAL 801(B2) IND SLNT.PART A OF TWO PART EC-801(B4)
FILLET SLNT KIT. 3M GENERIC ID:62-0801-XXXX-X.ADD INGR:SILICA
PIGMENT & WATER. QTY:1 GL.
================== Physical/Chemical Properties ==================
HCC:F4
Spec Gravity:1.36
Solubility in Water:SLIGHT
Appearance and Odor:BLACK,SULFUR ODOR
Percent Volatiles by Volume:3
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
Hazardous Decomposition Products:CO,CO2,SULFUR COMPOUNDS
==================== Disposal Considerations ====================
Waste Disposal Methods:MAY BE DISPOSED OF IN A SANITARY LANDFILL
ACCORDING TO LOCAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|