===================== Product Identification =====================
MSDS NAME:6205 GLID-THANE II ACRYLIC POLYURETHANE COATING 6200 SERIES
NIIN:00F056636
MSDS Number: CHNHS
=== Responsible Party ===
Company:ICI PAINTS/MACCO ADHESIVES/GLIDDEN PAINT CO
Address:925 EUCLID AVENUE
City:CLEVELAND
State:OH
ZIP:44115-5000
Country:US
Info Phone Num:216-344-8207/800-221-4100
Emergency Phone Num:800-221-4100/216-344-8207
CAGE:EO698
=== Contractor Identification ===
Company:GLIDDEN PAINT, ICI PAINTS NORTH AMERICA
Address:925 EUCLID AVE
Box:City:CLEVELAND
State:OH
ZIP:44115
Country:US
Phone:800-545-2643/216-344-8207
CAGE:01PD6
Company:ICI PAINTS/MACCO ADHESIVES/GLIDDEN PAINT CO
Address:925 EUCLID AVENUE
City:CLEVELAND
State:OH
ZIP:44115-5000
Country:US
Phone:216-344-8207/800-221-4100
CAGE:EO698
============= Composition/Information on Ingredients =============
Name:ETHYL BENZENE *98-2*
CAS:100-41-4
RTECS #:DA0700000
Fraction by Wt: 1-5%
Other REC Limits:100 PPM
OSHA PEL:435 MG/CUM
ACGIH TLV:434 MG/CUM
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS
Name:BUTYL ACETATE (N-BUTYL ACETATE) *98-2*
CAS:123-86-4
RTECS #:AF7350000
Fraction by Wt: 5-1%-
Other REC Limits:150 PPM
OSHA PEL:710 MG/CUM
ACGIH TLV:713 MG/CUM
EPA Rpt Qty:5000 LBS
DOT Rpt Qty:5000 LBS
Name:OXO-HEXYL ACETATE *98-2*
CAS:88230-35-7
Fraction by Wt: 1-5%
Name:ACETIC ACID, C6-8-BRANCHED ALKYL ESTERS, C3-8-BRANCHED
ALKYL ESTERS ACETIC ACID
CAS:90438-79-2
Fraction by Wt: 10-20%
Name:BENZENE (HUMAN CARCINOGEN BY IARC GROUP 1, OSHA, NTP &
ACGIH) *98-2*
CAS:71-43-2
RTECS #:CY1400000
Fraction by Wt: 0.01-1%
Other REC Limits:0.32 MG/CUM NIOSH
OSHA PEL:1 PPM
ACGIH TLV:0.5 MG/CUM (A1)
EPA Rpt Qty:10 LBS
DOT Rpt Qty:10 LBS
Name:BUTYL ACRYLATE, HYDROXYETHYL METHACRYLATE, METHACRYLIC
ACID, METHYL METHACRYLATE, STYRENE POLYMER *98-2*
CAS:36179-96-1
Fraction by Wt: 40-50%
Name:VOLATILE ORGANIC CONTENT: 509.15 G/L
RTECS #:9999999VO
Name:TALC (POWDER), (ASBESTOS FREE), TALCUM; HYDROUS MAGNESIUM
SILICATE (IARC - GROUP 3) *98-2*
CAS:14807-96-6
RTECS #:WW2710000
Fraction by Wt: 5-10%
OSHA PEL:2 MG/CUM (RESP DUST)
ACGIH TLV:2 MG/CUM (RESP DUST)
Name:XYLENE, DIMETHYLBENZENE, XYLOL (IARC - GROUP 3) *98-2*
CAS:1330-20-7
RTECS #:ZE2100000
Fraction by Wt: 20-30%
Other REC Limits:100 PPM
OSHA PEL:100 PPM
ACGIH TLV:100 PPM, SKIN
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS
===================== Hazards Identification =====================
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:YES IARC:YES OSHA:YES
Health Hazards Acute and Chronic:INHALATION: IRRITATION OF RESPIRATORY
TRACT, MUCOUS MEMBRANE, CNS DEPRESSION, ANESTHETIC EFFECT,
PULMONARY EDEMA, ASPHYXIATION & DEATH, POSSIBLE SENSITIZATION.
SKIN: IRRITATION/DERMATITIS, BURNS, ABSO RPTION & CNS DEPRESSION.
EYES: IRRITATION/BURNS, CORNEAL INJURY. INGESTION: MAY CAUSE LUNG
INFLAMMATION & DAMAGE. (SUPP)
Explanation of Carcinogenicity:SEE INGREDIENTS.
Effects of Overexposure:IRRITATION, LOSS OF APPETITE, FATIGUE,
DROWSINESS, DIZZINESS, LIGHTHEADEDNESS, HEADACHE, UNCOORDINATION,
NAUSEA, VOMITING, CHEST PAIN, FLU-LIKE SYMPTOMS, COUGHING,
RESPIRATORY PROBLEMS, INTOXICATION, TIGHTNESS OF CHEST, CONFUSION,
NARCOSIS, DIFFICULTY BREATHING, BRONCHITIS, LOSS OF CONSCIOUSNESS,
RESPIRATORY FAILURE.
Medical Cond Aggravated by Exposure:EYE, SKIN, RESPIRATORY DISORDERS,
ASTHMA LIKE CONDITIONS, CARDIAC ABNORMALITIES, KIDNEY & LIVER
DISORDERS.
======================= First Aid Measures =======================
First Aid:INHALATION: REMOVE TO FRESH AIR. RESTORE & SUPPORT BREATHING.
HAVE TRAINED PERSON GIVE OXYGEN IF NECESSARY. SKIN: FLUSH W/WATER,
THEN WASH W/SOAP & WATER. EYES: FLUSH W/LARGE AMOUNTS OF WATER FOR
15 M INS. OBTAIN MEDICAL ATTENTION IN ALL CASES.
===================== Fire Fighting Measures =====================
Flash Point:83F
Extinguishing Media:DRY CHEMICAL/FOAM, WATER FOG, CO2.
Fire Fighting Procedures:WATER MAY BE USED TO COOL & PROTECT EXPOSED
CONTAINERS. USE FULL PROTECTIVE CLOTHING & SCBA.
Unusual Fire/Explosion Hazard:CLOSED CONTAINERS MAY EXPLODE WHEN
EXPOSED TO EXTREME HEAT/FIRE. VAPORS ARE > THAN AIR & MAY TRAVEL
LONG DISTANCES TO SOURCE OF IGNITION & FLASH BACK. (SEE SUPP
================== Accidental Release Measures ==================
Spill Release Procedures:ELIMINATE SOURCES OF IGNITION. COLLECT
W/ABSORBENT MATERIALS. USE NON-SPARKING TOOLS. SHUT OFF LEAK
SAFELY. DIKE & CONTAIN. PUMP TO STORAGE/SALVAGE VESSELS. USE
ABSORBENT TO PICK UP EXCESS RESIDUE. KE EP SALVAGEABLE. RINSE WATER
OUT OF SEWERS.
====================== Handling and Storage ======================
Handling and Storage Precautions:STORE <80-100F. KEEP AWAY FROM HEAT,
SPARKS & OPEN FLAME. KEEP CONTAINERS TIGHTLY CLOSED & UPRIGHT WHEN
NOT IN USE. USE ONLY W/ADEQUATE VENTILATION.
Other Precautions:KEEP OUT OF REACH OF CHILDREN. AVOID CONTACT W/SKIN,
EYES & BREATHING OF VAPORS. INTENTIONAL MISUSE BY DELIBERATELY
CONCENTRATING & INHALING THE CONTENTS MAY BE HARMFUL/FATAL.
============= Exposure Controls/Personal Protection =============
Respiratory Protection:WHERE RESPIRATORY PROTECTION IS REQUIRED, USE
ONLY NIOSH/MSHA APPROVED RESPIRATORS.
Ventilation:PROVIDE DILUTION/LOCAL EXHAUST TO PREVENT BUILD UP OF
VAPORS. USE EXPLOSION-PROOF EQUIPMENT. USE NON-SPARKING TOOLS.
Protective Gloves:IMPERVIOUS
Eye Protection:SAFETY GLASSES/GOGGLES
Other Protective Equipment:EYE WASH, SAFETY SHOWER, IMPERVIOUS
CLOTHING, APRON, BOOTS.
Work Hygienic Practices:REMOVE/LAUNDER CONTAMINATED CLOTHING BEFORE
REUSE. DISCARD CONTAMINATED LEATHER ITEMS SUCH AS SHOES & BELTS.
Supplemental Safety and Health
FIRE HZRD CONT'D: VAPORS MAY IGNITE EXPLOSIVELY AT AMBIENT TEMPS.
VAPORS CAN FORM EXPLOSIVE MIXTURES IN AIR AT ELEVATED TEMPS & MAY
DECOMPOSE UNDER FIRE CONDITIONS EMITTING IRRITANT/TOXIC GASES. HLTH
HZRD CONT'D: CNS DEPRESSION
================== Physical/Chemical Properties ==================
Boiling Pt:B.P. Text:176F-392F
Percent Volatiles by Volume:54.00
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
OXIDIZERS, ACIDS, BASES, AMINES, WATER, ALCOHOLS, METAL COMPOUNDS,
SURFACE ACTIVE MATERIALS, CAUSTICS.
Stability Condition to Avoid:ELEVATED TEMPS, MOISTURE, SPARKS, OPEN
FLAME & IGNITION SOURCE.
Hazardous Decomposition Products:CO, CO2, OXIDES OF NITROGEN, HYDROGEN
CYAMIDE, ISOCYANATE, COMPOUNDS, AROMATIC AMINES, 3,3
DICHLOROBENZIDINE.
Conditions to Avoid Polymerization:ELEVATED TEMPS, MOISTURE, SPARKS,
OPEN FLAME & IGNITION SOURCES.
==================== Disposal Considerations ====================
Waste Disposal Methods:DISPOSE OF IAW/FEDERAL, STATE & LOCAL
REGULATIONS. AVOID DISCHARGE TO NATURAL WATERS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|