=====================  Product Identification  =====================

MSDS NAME:ELECTRODE 110 SUPER
NIIN:00N088293
MSDS Number: CHNZF
=== Responsible Party ===
Company:EUTECTIC CORP
Address:1515 BROOK DR
City:DOWNERS GROVE
State:IL
ZIP:60515
Country:US
Info Phone Num:800-323-4845
Emergency Phone Num:800-323-4845
CAGE:72271
=== Contractor Identification ===
Company:EUTECTIC CORP
Address:9625-J SOUTHERN PINE BLVD
Box:City:CHARLOTTE
State:NC
ZIP:28273
Country:US
Phone:704-527-9800/ 800-221-1433
CAGE:72271
Company:EUTECTIC CORPORATION
Address:1515 BROOK DR
Box:City:DOWNERS GROVE
State:IL
ZIP:60515
Country:US
Phone:800-323-4845
CAGE:5N977

=============  Composition/Information on Ingredients  =============

Name:IRON
CAS:7439-89-6
RTECS #:NO4565500
OSHA PEL:N/K 
ACGIH TLV:N/K 

Name:CALCIUM CARBONATE
CAS:1317-65-3
RTECS #:EV9580000
OSHA PEL:15 MG/M3 TDUST
ACGIH TLV:10 MG/M3 TDUST

Name:POTASSIUM SILICATE
CAS:1312-76-1
OSHA PEL:N/K 
ACGIH TLV:N/K 

Name:SODIUM SILICATE
CAS:1344-09-8
OSHA PEL:N/K 
ACGIH TLV:N/K 

Name:FLUORSPAR
CAS:14542-23-5
OSHA PEL:N/K 
ACGIH TLV:N/K 

Name:NICKEL (SARA 313) (CERCLA)
CAS:7440-02-0
RTECS #:QR5950000
Fraction by Wt: 1-5%
OSHA PEL:1 MG/M3
ACGIH TLV:1 MG/M3

Name:SUPDAT: COATINGS MAY PRDCE FLUORIDE CMPDS, METAL OXIDES,
    CARBON & SILICA. GASEOUS RXN PRODS MAY INCL OZONE, CO, (ING 8)
RTECS #:9999999ZZ

Name:ING 7: CO*2, NITROGEN OXIDES & CERTAIN INERT GASES USED AS
    SHIELDING GASES. OSHA SPECIFIES NICKEL & ITS CMPDS (ING 9)
RTECS #:9999999ZZ

Name:ING 8: MUST BE CONSIDERED CARCINS BECAUSE THEY ARE SO
    CLASSIFIED BY NTP/IARC. TO MFR'S KNOWLEDGE, NO RELIABLE (ING 10)
RTECS #:9999999ZZ

Name:ING 9:SCIENTIFIC STUDIES SHOWING WORKERS EXPOS TO ALLOY
    CONTAINING CHROMIUM/NICKEL RUN INCRD RISK OF LUNG CANCER(ING 11)
RTECS #:9999999ZZ

Name:ING 10: BECAUSE EXPOS TO FORMS OF NICKEL & CHROMIUM FOUND
    IN FUMES. ONE REC WAY TO DETERM COMPOSITION & QTY OF (ING 12)
RTECS #:9999999ZZ

Name:ING 11: FUMES & GASES TO WHICH WORKERS EXPOS IS TO TAKE AIR
    SAMPLE INSIDE WORKER'S HELMET IF WORN/IN WELDER'S (ING 13)
RTECS #:9999999ZZ

Name:ING 12: BRTHG ZONE. SEE ANSI/AWS F1.1 AVAIL FROM AWS, PO
    BOX 351040, MIAMI, FL 33135. FOR MORE INFO CNTCT NEHC .
RTECS #:9999999ZZ

Name:EFTS OF OVEREXP: OPERATIONS. SYMPS ARE SIMILAR TO FLU TYPE
    SICKNESS INCL CHILLS, FEVER, HEAD & MUSC ACHE, CHEST (ING 15)
RTECS #:9999999ZZ

Name:ING 14: TIGHTNESS, DRY NOSE & MOUTH, MUSC PAIN, NAUS &
    VOMIT. SYMPS USUALLY OCCUR W/IN SEVERAL HRS AFTER OVEREXP(ING 16)
RTECS #:9999999ZZ

Name:ING 15: & MAY LAST 6-24 HRS. GEN NUISANCE DUSTS: MOST
    INERT, NONTOX & CHEM NONIRRIT. SKIN CNTCT:POSS DRYING & (ING 17)
RTECS #:9999999ZZ

Name:ING 16: MECH IRRIT. EYE CNTCT:PARTICULATE IRRIT. EXCESS
    INHAL:MILD PULM IRRIT & POSS NONDISABLING LUNG FIBROSIS.(ING 18)
RTECS #:9999999ZZ

Name:ING 17: FLUORIDE CMPDS (FLUORSPAR):SHORT TERM OVEREXP TO
    DUST MAY CAUSE EYE & RESP TRACT IRRIT. MAY CAUSE NAUS, (ING 19)
RTECS #:9999999ZZ

Name:ING 18: VOMIT, ABDOM PAIN, STOM BLEEDING, SHORTNESS OF
    BRTH, CONVLS, MUSC WEAK/DISTURBED VISION. LONG TERM:MAY (ING 20)
RTECS #:9999999ZZ

Name:ING 19: CAUSE EXCESS CALCIFICATION OF BONES, LIGAMENTS OF
    RIBS, PELVIS & SPINAL COLUMN. SKIN BURNS &/OR RASH. (ING 21)
RTECS #:9999999ZZ

Name:ING 20: IRON: GEN INFLAM OF RESP TRACT. LONG TERM OVEREXP
    MAY CAUSE SIDEROSIS; MAY AFFECT PULM FUNC. NICKEL: (ING 22)
RTECS #:9999999ZZ

Name:ING 21: SHORT TERM EFTS FROM INHAL: METALLIC TASTE, NAUS,
    CHEST TIGHTNESS, FEVER/ALLERGIC RXNS. ALSO ALLERGIC (ING 23)
RTECS #:9999999ZZ

Name:ING 22: RXNS FROM SKIN/EYE CNTCT. LONG TERM:LUNG FIBROSIS
    OR PNEUMOCONIOSIS. FOR MORE HLTH HAZ INFO CNTCT NEHC .
RTECS #:9999999ZZ

Name:EYE PROT: & FULL LENGTH FSHLD . PROVIDE PROT SCREENS &
    FLASH GOGGS IF NEC TO SHIELD OTHERS. AS RULE, START(ING 25)
RTECS #:9999999ZZ

Name:ING 24: W/SHADE TOO DARK TO SEE WELD ZONE, THEN GO TO NEXT
    LIGHTER SHADE WHICH GIVES SUFFICIENT VIEW OF WELD ZONE.
RTECS #:9999999ZZ

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:YES
Reports of Carcinogenicity:NTP:YES    IARC:YES	  OSHA:NO
Health Hazards Acute and Chronic:INHAL:FUMES ASSOC W/HEATING, WELDING,
    BRAZING, SOLDERING/CUTTING METALS CAN BE DANGEROUS TO HLTH &
    OVEREXP CAN CAUSE LUNG DMG &/OR OTHER ORGAN DMG. ARC RAYS & UV
    LIGHT CAN INJURE EYE & BURN SKIN. INGE ST:MAY BE HARMFUL/FATAL IF
    SWALLOWED. GEN WELDING FUMES CAN CREATE ONE/MORE OF FOLLOWING:
    FUMES, GASES (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NICKEL: IARC MONOGRAPHS, VOL 49, PG 257,
    1990:GROUP 2B. NTP 7TH ANNUAL REPORT ON CARCINS, 1994:ANTIC TO BE
    CARCIN.
Effects of Overexposure:HLTH HAZ: & DUSTS CAN BE DANGEROUS TO HLTH.
    SHORT TERM OVEREXP MAY RSLT IN DIZZ, NAUS OR DRYNESS/IRRIT OF NOSE,
    THROAT/EYES. EXCESS OVEREXP MAY CAUSE BRONCH ASTHMA, LUNG FIBROSIS,
    PNEUMOCONIOSIS OR SI DEROSIS (IRON DEPOSITS IN LUNG). METAL FUME
    FEVER CAN BE CAUSED BY INHAL OF CERTAIN METALLIC CMPDS  DURING (ING
    14)
Medical Cond Aggravated by Exposure:AGGRAVATION OF PREEXISTING
    RESPIRATORY OR ALLERGIC CONDITIONS MAY OCCUR IN SOME WORKERS.

=======================  First Aid Measures  =======================

First Aid:INHAL:MOVE VICTIM TO FRESH AIR SOURCE. CNTCT MD & ADVISE ON
    INGREDS LISTED. SKIN: THOROUGHLY WASH HANDS/EFFECTED AREAS W/SOAP &
    WATER TO REMOVE ALL RESIDUE. IF RASH/BURN DEVELOPS CONSULT MD. EYE:
    THOR OUGHLY FLUSH W/WATER FOR AT LST 15 MIN TO REMOVE ALL RESIDUE.
    OBTAIN PROMPT MED ADVICE FOR FLUXES & CHEM AIDS. ADVISE MD OF
    INGREDS LISTED. INGEST: CALL MD &/OR POIS CTL CTR. ADVISE OF
    INGREDS LISTED.

=====================  Fire Fighting Measures  =====================

Extinguishing Media:CARBON DIOXIDE, DRY CHEMICAL FOAM TYPE.
Fire Fighting Procedures:NIOSH APPRVD SCBA & FULL PROT EQUIP . TOX
    FUMES MAY BE PRDCED. SEE HAZ DECOMP PRODS. REFER TO ANSI Z49.1 FOR
    FIRE PREVENTION DURING USE OF WELDING(SUPDAT)
Unusual Fire/Explosion Hazard:GEN NONFLAM; WELDING ARC, SPKS & FLAMES
    CAN IGNITE COMBUSTS & FLAMS. SOME FLUXES & CHEM AIDS MAY GIVE OFF
    HCL, PHOSGENE & CHLORINE GASES. CANS UNDER (SUPDAT)

==================  Accidental Release Measures  ==================

Spill Release Procedures:NONE SPECIFIED BY MANUFACTURER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:PLEASE READ AND UNDERSTAND PRODUCT
    LABEL INFO FOR PROPER PROCEDURES & USE.
Other Precautions:SEE ANSI Z49.1 "SFTY IN WELDING & CUTTING" & CHAPTER
    11 OF "THERMAL SPRAYING" PUB BY AWS & OSHA PUB 2206 (29 CFR 1910)
    FOR MORE DETAILS. TRAIN WELDER TO KEEP HIS/HER FACE AWAY FROM
    FUME/DUST PLUME.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:IF WORK STATION IS NOT PROPERLY VENTILATED TO
    EXHAUST ALL FUMES, VAPORS AND DUSTS BELOW THE RECOMMENDED EXPOSURE
    LIMITS, USE A NIOSH APPROVED RESPIRATOR.
Ventilation:USE ENOUGH GEN VENT & LOC EXHST AT WORK SITE TO KEEP ALL
    FUMES & DUST FROM WORKER'S BREATHING ZONE & GENERAL AREA.
Protective Gloves:WELDER'S GLOVES.
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGS (ING 24)
Other Protective Equipment:ANSI APPRVD EYE WASH & DELUGE SHOWER . HAND,
    HEAD & BODY PROT. MAY INCL ARM PROT, APRONS, HATS & DARK PROT
    CLTHG.
Work Hygienic Practices:TRAIN WORKERS NOT TO TOUCH LIVE ELECTRICAL
    PARTS AND TO INSULATE THEMSELVES FROM WORK AND ELECTRICAL GROUND.
Supplemental Safety and Health
FIRE FIGHT PROC: & ALLIED PROCESSES. EXPLO HAZ: PRESS & FLAMS MAY
    EXPLODE. HAZ DECOMP PRODS: NORM OPERATION INCL THOSE ORIGINATING
    FROM VOLATILIZATION RXN OR OXIDATION OF MATLS LISTED PLUS THOSE OF
    BA SE METAL & COATING, ETC. REASONABLY EXPECTED CONSTITUENTS OF
    FUME MAY INCL COMPLEX OXIDES OF METALS LISTED. FLUX (ING 7)

==================  Physical/Chemical Properties  ==================

Appearance and Odor:NONE SPECIFIED BY MANUFACTURER.

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
NONE SPECIFIED BY MANUFACTURER.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:DURING WELDING, FUME & GAS DECOMP
    PRODS GENERATED DIFFER IN PERCENT & FORM FROM LISTED INGREDS.
    DECOMP PRODS OF (SUPDAT)

====================  Disposal Considerations  ====================

Waste Disposal Methods:DISPOSE OF WASTE MATL, PWDRS, GRINDING OR FILTER
    RESIDUES IN ENVIRONMENTALLY SENSITIVE MANNER I/A/W FED, STATE &
    LOCAL REGS. USE APPROP MEASURES TO KEEP AIRBORNE DUST LEVELS
    CONTAINED I/A/W EXPOS LEVE LS LISTED. SEE ALSO SECTION ON SAFE
    HNDLG & STOR.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.

*** END OF RECORD ***