=====================  Product Identification  =====================

MSDS NAME:AMDRY 2010,601 NS METAL POWDER
NIIN:01-399-1527
Status Code:A
MSDS Number: CHZCR
=== Responsible Party ===
Company:SULZER METCO/WESTBURY/INC
Address:1101 PROSPECT AVE
Box:1006
City:WESTBURY
State:NY
ZIP:11590-0201
Country:US
Info Phone Num:516-334-1300
Emergency Phone Num:516-334-1300/800-424-9300(CHEMTREC)
CAGE:01FK3
=== Contractor Identification ===
Company:SULZER METCO (US) INC
Address:1101 PROSPECT AVE
Box:City:WESTBURY
State:NY
ZIP:11590-2724
Country:US
Phone:516-334-1300
CAGE:01FK3

=============  Composition/Information on Ingredients  =============

Name:ALUMINUM (SARA 313)
CAS:7429-90-5
RTECS #:BD0330000
Fraction by Wt: 53%
Other REC Limits:NONE RECOMMENDED
OSHA PEL:15 MG/M3 DUST
ACGIH TLV:10 MG/M3 DUST; 9596

Name:POLY-P-OXYBENZENE POLMER
CAS:26099-71-8
Fraction by Wt: 40%
Other REC Limits:NONE RECOMMENDED

Name:SILICON
CAS:7440-21-3
RTECS #:VW0400000
Fraction by Wt: 7%
Other REC Limits:NONE RECOMMENDED
OSHA PEL:15 MG/M3 TDUST
ACGIH TLV:10 MG/M3 TDUST; 9596

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:LD50 (ORAL RAT) IS NOT RELEVANT.
Routes of Entry: Inhalation:YES  Skin:NO  Ingestion:NO
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:TARGET ORGANS: EYE, SKIN, RESPIRATORY
    AND GASTROINTESTINAL TRACTS. ACUTE- HAZARD BY INHALATION,
    INGESTION, SKIN AND EYE CONTACT. INHALATION MAY CAUSE
    PNEUMOCONIOSIS. EYE CONTACT MAY CAUSE IRRITATION.  SKIN CONTACT
    WITH DUST MAY CAUSE IRRITATION. INGESTION MAY CAUSE GI TRACT
    IRRITATION. CHRONIC- MAY CAUSE LUNG DAMAGE.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:IRRITATION, COUGH, SHORTNESS OF BREATH,
    DECREASED PULMONARY FUNCTION, HEADACHE, NAUSEA, VOMITING
Medical Cond Aggravated by Exposure:INDIVIDUALS WITH PRE-EXISTING
    DISEASES OF THE EYE, SKIN, RESPIRATORY TRACT MAY HAVE INCREASED
    SUSCEPTIBILITY TO THE TOXICITY OF EXCESSIVE EXPOSURES.

=======================  First Aid Measures  =======================

First Aid:GET MEDICAL HELP IF SYMPTOMS PERSIST. INHALED: MOVE TO FRESH
    AIR. EYES: IMMEDIATELY FLUSH WITH WATER FOR 15 MINUTES. HOLD
    EYELIDS OPEN. SKIN: WASH WITH SOAP & WATER. ORAL: WASH OUT MOUTH
    WITH WATER. G ET MEDICAL ATTENTION.

=====================  Fire Fighting Measures  =====================

Flash Point:NONE
Lower Limits:NOT RELEVANT
Upper Limits:NOT RELEVANT
Extinguishing Media:TO EXTINGUISH METAL FIRE, USE DRY SAND, DRY
    GRAPHITE OR OTHER CLASS "D" FIRE EXTINGUISHING POWDER.
Fire Fighting Procedures:TREAT AS A METALLIC FIRE. WEAR PROTECTIVE
    CLOTHING AND NIOSH-APPROVED SELF-CONTAINED BREATHING APPARATUS.
Unusual Fire/Explosion Hazard:FINE METAL DUSTS ARE FLAMMABLE AND MAY
    EXPLODE. ALUMINUM IS A FLAMMABLE SOLID, DO NOT EXPOSE TO WATER OR
    MOISTURE. SILICON MAY IGNITE IF EXPOSED TO FLAME.

==================  Accidental Release Measures  ==================

Spill Release Procedures:WEAR PERSONAL PROTECTIVE EQUIPMENT. VACUUM
    SPILLAGE WITH A VACUUM CLEANER HAVING A HIGH EFFICIENCY PARTICULATE
    (HEPA) FILTER. DO NOT SWEEP. AVOID GENERATING AIRBORNE DUST.
Neutralizing Agent:NOT RELEVANT

======================	Handling and Storage  ======================

Handling and Storage Precautions:STORE IN DRY, VENTILATED PLACE AWAY
    FROM INCOMPATIBLE MATERIALS. KEEP OUT OF REACH OF CHILDREN. AVOID
    PHYSICAL DAMAGE.
Other Precautions:AVOID EYE OR SKIN CONTACT. AVOID BREATHING DUSTS. USE
    WITH ADEQUATE VENTILATION. WASH THOROUGHLY AFTER HANDLING AND
    BEFORE EATING AND DRINKING. REMOVE CONTAMINATED CLOTHING. LAUNDER
    BEFORE REUSE. DO N OT INGEST.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:USE NIOSH APPROVED SUPPLIED AIR RESPIRATORY
    PROTECTION OR RESPIRABLE DUST, FUME RESPIRATOR WHEN WELDING,
    BRAZING OR SOLDERING IN CONFINED SPACE OR WHERE LOCAL EXHAUST
    VENTILATION DOES NOT KEEP EXPOSUR E BELOW TLV.
Ventilation:LOCAL EXHAUST VENTILATION SHOULD BE USED TO CONTROL
    EXPOSURE TO AIRBORNE FUMES OR DUST WHENEVER POSSIBLE.
Protective Gloves:WELDER'S (HEAT RESISTANT) WHEN WELDING
Eye Protection:WELDER'S GOGGLES WHEN WELDING
Other Protective Equipment:EYE WASH STATION, SAFETY SHOWER, APRON
    (ALUMINIZED), EAR PROTECTION (TO AVOID EXCESSIVE NOISE)
Work Hygienic Practices:OBSERVE GOOD PERSONAL HYGIENE PRACTICES AND
    RECOMMENDED PROCEDURES.
Supplemental Safety and Health

==================  Physical/Chemical Properties  ==================

HCC:N1
NRC/State Lic Num:NOT RELEVANT
Melt/Freeze Pt:M.P/F.P Text:1100F-1300F
Viscosity:NOT RELEVANT
Evaporation Rate & Reference:NOT RELEVANT
Solubility in Water:INSOLUBLE
Appearance and Odor:POWDER - ODORLESS

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS, ACIDS, HALOGENATED HYDROCARBONS, CHLORINE, FLUORINE,
    CALCIUM, CESIUM CARBIDE, ALKALINE CARBONAES, H2O
Stability Condition to Avoid:MOISTURE
Hazardous Decomposition Products:OZONE AND NITRIC OXIDE ARE FORMED BY
    PLASMA FLAME (SIMILAR TO WELDING FUMES).

====================  Disposal Considerations  ====================

Waste Disposal Methods:DISCARD ANY PRODUCT, RESIDUE, DISPOSABLE
    CONTAINER OR LINER IN AN ENVIRONMENTALLY ACCEPTABLE MANNER, IN FULL
    COMPLIANCE WITH LOCAL, STATE AND FEDERAL REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.

*** END OF RECORD ***