=====================  Product Identification  =====================

MSDS NAME:305 SUPREME FORMULA ENGINE OIL
NIIN:01-346-1352
Status Code:A
MSDS Number: CKFPC
=== Responsible Party ===
Company:SOUTHWESTERN PETROLEUM CORP
Address:534 N MAIN ST
Box:789
City:FORT WORTH
State:TX
ZIP:76101
Country:US
Info Phone Num:817-332-2336
Emergency Phone Num:817-332-2336/817-348-7235
Chemtrec Ind/Phone:(800)424-9300
CAGE:14392
=== Contractor Identification ===
Company:SOUTHWESTERN PETROLEUM CORP
Address:534 N MAIN ST
Box:961005
City:FORT WORTH
State:TX
ZIP:76106
Country:US
Phone:817-348-7235
Contract Num:SP0450-00-M-C162
CAGE:14392

=============  Composition/Information on Ingredients  =============

Name:DISTILLATES, SOLVENT REFINED HEAVY PARAFFINIC:[CAS NUMBERS:
    64742- (-57- 0, -54- 7, -55- 8, -62- 7, -56- 9), 64741- 88- 4]
> Wt:94.
OSHA PEL:5 MG/M3 OIL MIST,8 H
ACGIH TLV:5 MG/M3 OIL MIST,8 H
ACGIH STEL:10MG/M3 OIL MIST15M

Name:ZINC ALKYL DITHIO PHOSPHATE (PHOSPHORODITHIOIC ACID, ZINC
    SALT), (CAS# 68648-42-3)
< Wt:2.

=====================  Hazards Identification  =====================

Routes of Entry: Inhalation:NO	Skin:NO  Ingestion:NO
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:EYE CONTACT: IRRITATION MAY OCCUR.
    SKIN CONTACT: PROLONGED AND REPEATED CONTACT MAY CAUSE MILD
    IRRITATION AND INFLAMMATION. INHALATION: VAPOR INHALATION UNDER
    AMBIENT CONDITION IS NORMALLY NOT A PROBL EM. INGESTION: LOW ORDER
    OF ACUTE ORAL TOXICITY, BUT MINUTE AMOUNTS ASPIRATED INTO THE LUNGS
    DURING INGESTION MAY CAUSE MILD TO SEVERE PULMONARY INJURY AND
    POSSIBLY DEATH. ACUTE HAZARD: NOT EXPECTED T O PRESENT A
    SIGNIFICANT HEALTH HAZARD UPON SHORT TERM EXPOSURE. CHRONIC
    HAZARDS: PROLONGED AND/OR REPEATED CONTACT WITH THIS MATERIAL MAY
    PRODUCE MILD SKIN IRRITATION AND INFLAMMATION.
Explanation of Carcinogenicity:USED OIL MAY CAUSE SKIN CANCER.
Effects of Overexposure:EYES: IRRITATION. SKIN: MILD IRRITATION,
    INFLAMMATION. INHALATION: NORMALLY NOT A PROBLEM. INGESTION: LOW
    ORDER OF ACUTE ORAL TOXICITY.
Medical Cond Aggravated by Exposure:PERSONS WITH PRE-EXISTING SKIN
    DISORDERS SHOULD AVOID CONTACT WITH THIS PRODUCT.

=======================  First Aid Measures  =======================

Eyes: FLUSH WITH WATER FOR 15 MINUTES, IF PAIN OR REDNESS
    PERSIST, GET MEDICAL ATTENTION. SKIN: WASH WITH SOAP AND WATER
    AFTER WIPING OFF EXCESS MATERIAL. INHALATION: REMOVE TO FRESH AIR.
    IF BREATHING  DIFFICULTIES PERSIST, GET MEDICAL ATTENTION.
    INGESTION: DO MOT INDUCE VOMITING, GET MEDICAL ATTENTION
    IMMEDIATELY.

=====================  Fire Fighting Measures  =====================

Flash Point Method:COC
Flash Point:>179.C, 354.2F
Autoignition Temp:>260.C, 500.F
Lower Limits:0.9
Upper Limits:7
Extinguishing Media:USE WATER SPRAY, DRY CHEMICAL, FOAM, OR CARBON
    DIOXIDE.
Fire Fighting Procedures:USE WATER TO KEEP FIRE-EXPOSED CONTAINER COOL.
    WATER SPRAY MAY BE USED TO FLUSH SPILLS AWAY FROM EXPOSURES. USE
    SELF-CONTAINED BREATHING APPARATUS.
Unusual Fire/Explosion Hazard:WATER OR FOAM MAY CAUSE FROTHING.
    HYDROGEN SULFIDE MAY BE PRODUCED ABOVE 121C.

==================  Accidental Release Measures  ==================

Spill Release Procedures:USE INERT ABSORBANT MATERIAL TO CONFINE SPILLS
    AND TO ABSORB MATERIAL. SCOOP INTO A DISPOSABLE CONTAINER.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:NONE NORMALY REQUIRED. USE NIOSH/MSHA APPROVED
    RESPIRATORS TO MEET EXPOSURE LIMITS.
Ventilation:PROVID ADEQUATE VENTILATION TO MEET EXPOSURE LIMITS.
Protective Gloves:GLOVES AND PROTECTIVE CLOTHING  RECOMMENDED.
Eye Protection:GOGGLES OR FACE SHIELD RECOMMENDED.
Supplemental Safety and Health

==================  Physical/Chemical Properties  ==================

HCC:V6
Boiling Pt:>293.C, 559.4F
Vapor Density:>5
Spec Gravity:0.9
Solubility in Water:INSOLUBLE
Appearance and Odor:PURPLE OIL, LUBE OIL ODOR.
Percent Volatiles by Volume:NONE

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
STRONG OXIDANTS (AS RELATED TO GENERAL ORGANIC MATERIALS.)
Stability Condition to Avoid:STABLE BELOW 121C. AVOID HIGH HEAT, OPEN
    FLAMES AND OTHER SOURCES OF IGNITION
Hazardous Decomposition Products:HYDROGEN SULFIDE MAY BE PRODUCED ABOVE
    121C.
Conditions to Avoid Polymerization:DOES NOT OCCUR.

===================  Toxicological Information	===================

Toxicological Information:REPEATED SKIN CONTACT WITH (ZDDP) HAS
    PRODUCED ADVERSE TESTICULAR EFFECTS IN RABBITS. RECENT STUDIES,
    HOWEVER, INDICATE THAT THIS IS A STRESS REACTION ONLY. SIMILAR
    TESTS IN RATS DO NOT INDICATE ANY T ESTICULAR EFFECTS, FURTHERMORE
    RATS ARE NOW RECOGNIZED AS MORE APPROPRIATE FOR THIS TYPE OF
    TESTING, WE BELIEVE THAT (ZDDP), AS USE IN THIS PRODUCT, PROVIDES
    NO OTHER HAZARD OTHER THAN POSSIBLE SKIN I RRITATION COMMON TO
    LUBRICANTS.

====================  Disposal Considerations  ====================

Waste Disposal Methods:LAND FILL OR INCINERATE AS FEDERAL, STATE, AND
    LOCAL REGULATIONS PERMIT.

=====================  Regulatory Information  =====================

SARA Title III Information:ZINC ALKYL DITHIO PHOSPHATE IS SUBJECT TO
    THE REPORTING REQUIREMENTS OF SECTION 313, SARA TITLE I I I, (40
    CFR, PART 372) AS A ZINC COMPOUND.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.

*** END OF RECORD ***