=====================  Product Identification  =====================

MSDS NAME:SY540 SPECIALTY GLAZE
NIIN:00F003001
MSDS Number: BBMFK
=== Responsible Party ===
Company:DUNCAN ENTERPRISES
Address:5673 E SHIELDS AVE
City:FRESNO
State:CA
ZIP:93727-7819
Country:US
Info Phone Num:209-291-4444
Emergency Phone Num:303-623-4884
Preparer's Name:CURT SATHRE
CAGE:21546
=== Contractor Identification ===
Company:DUNCAN ENTERPRISES
Address:5673 E SHIELDS AVE
Box:City:FRESNO
State:CA
ZIP:93727
Country:US
Phone:209-291-4444
CAGE:21546

=============  Composition/Information on Ingredients  =============

Name:SILICA DIOXIDE, CRYSTALLINE QUARTZ, SAND (SUSPECTED HUMAN
    CARCINOGEN BY IARC)
CAS:14808-60-7
RTECS #:VV7330000
Fraction by Wt: <8%
Other REC Limits:0.05 MG/CUM NIOSH
OSHA PEL:SEE TABLE Z3
ACGIH TLV:0.1 MG/M3 RDUST;9293

Name:LEAD, INORGANIC LEAD (SUSPECTED HUMAN CARCINOGEN BY IARC,
    NTP & ACGIH)
CAS:7439-92-1
RTECS #:OF7525000
Fraction by Wt: <29%
OSHA PEL:0.05 MG/CUM
ACGIH TLV:0.15 MG/CUM
EPA Rpt Qty:1 LB
DOT Rpt Qty:1 LB

Name:BARIUM (SOLUBLE COMPOUNDS)
CAS:7440-39-3
RTECS #:CQ8370000
Fraction by Wt: <5%
OSHA PEL:0.5 MG/CUM
ACGIH TLV:0.5 MG/CUM

=====================  Hazards Identification  =====================

Routes of Entry: Inhalation:YES  Skin:NO  Ingestion:YES
Reports of Carcinogenicity:NTP:YES    IARC:YES	  OSHA:NO
Health Hazards Acute and Chronic:EYES: ABRASIVE, CAN SCRATCH.
Explanation of Carcinogenicity:SEE INGREDIENTS.
Effects of Overexposure:INHALATION: NERVOUS SYSTEM, KIDNEY OR BONE
    MARROW DAMAGE OR HARM TO THE DEVELOPING FETUS. INGESTION: LEAD
    CAUSES WEIGHT LOSS, STOMACH CRAMPS, LOSS OF COORDINATION, JOINT &
    MUSCLE PAIN.

=======================  First Aid Measures  =======================

Eyes: FLUSH W/WATER FOR AT LEAST 15 MINS. SKIN: WASH W/SOAP &
    WATER. OBTAIN MEDICAL ATTENTION IN ALL CASES.

=====================  Fire Fighting Measures  =====================

Fire Fighting Procedures:NONE. WILL NOT BURN.

==================  Accidental Release Measures  ==================

Spill Release Procedures:CLEAN THOROUGHLY WITH PAPER TOWEL AND WET
    SPONGE.

======================	Handling and Storage  ======================

Handling and Storage Precautions:WHEN USING, DON'T EAT, DRINK, OR
    SMOKE. KEEP SEALED. KEEP OUT OF REACH OF CHILDREN.
Other Precautions:AVOID USING IF PREGNANT OR CONTEMPLATING PREGNANCY.
    AVOID CONTACT W/EYES. AVOID INHALATION & INGESTION. IF GLAZE
    SPRAYING IS MAJOR PORTION OF WORK, REGULAR BLOOD LEAD LEVEL TESTING
    BY YOUR DOCTOR IS A DVISABLE.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:USE NIOSH APPROVED DUST & MIST RESPIRATOR FOR
    LEAD SUCH AS 3M 8710 OR EQUIVALENT. USE RESPIRATOR WHEN SPRAYING.
Ventilation:LOCAL EXHAUST: RECOMMENDED. MECHANICAL (GENERAL):
    RECOMMENDED WHEN SPRAYING.
Eye Protection:REQUIRED.
Other Protective Equipment:IF IN GLAZE FORM/APPLYING BY SPRAY, USE
    SPRAY BOOTH/RESPIRATORY. CLEAN SPRAY BOOTH FILTERS OFTEN.
    PROTECTIVE CLOTHING
Work Hygienic Practices:WASH HANDS IMMEDIATELY AFTER USE.
    REMOVE/LAUNDER CONTAMINATED CLOTHING BEFORE
    REUSE/EATING/DRINKING/SMOKING/LEAVING.
Supplemental Safety and Health
FRITS ARE PRODUCED FROM CHEMICAL REACTIONS BY SMELTING VARIOUS RAW
    MATERIALS TO FORM MOLTEN GLASS & RAPIDLY COOLED/GROUND INTO
    POWDERED FRIT. LEAD IS INCORPORATED INTO FRIT, CHEMICALLY REACTED
    IN FORM  OF SILICATES OF OTHER ESSENTIALLY INSOLUBLE COMPLEXES. THE
    INGREDIENTS ARE ONLY PRESENT AS PART OF FRIT CAS 65997-18-4.

==================  Physical/Chemical Properties  ==================

Boiling Pt:B.P. Text:212F
Melt/Freeze Pt:M.P/F.P Text:1800F
Spec Gravity:1.7
Evaporation Rate & Reference:AS WATER
Solubility in Water:INSOLUBLE
Appearance and Odor:COLORED ODORLESS LIQUID.

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES

====================  Disposal Considerations  ====================

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH LOCAL, STATE, AND
    FEDERAL REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.

*** END OF RECORD ***