=====================  Product Identification  =====================

MSDS NAME:VAN SON RUBBER BASE PLUS INKS
NIIN:01-133-2596
Status Code:A
MSDS Number: CLBBG
=== Responsible Party ===
Company:VAN SON HOLLAND INK CORP
Address:92 UNION STREET
City:MINEOLA
State:NY
ZIP:11501-3428
Country:US
Info Phone Num:516-294-8811
Emergency Phone Num:0000000000
CAGE:55269
=== Contractor Identification ===
Company:VAN SON HOLLAND INK CORP
Address:92 UNION STREET
City:MINEOLA
State:NY
ZIP:11501-3428
Country:US
Phone:516-294-8811
CAGE:55269

=============  Composition/Information on Ingredients  =============

Name:CARBON BLACK
CAS:1333-86-4
RTECS #:FF5800000
Minumum % Wt:15.
Maxumum % Wt:25.
OSHA PEL:3.5 MG/M3
ACGIH TLV:3.5 MG/M3

Name:HYDROTREATED MIDDLE DISTILLATE (PETROLEUM)
CAS:64742-46-7
RTECS #:JN9379645
Minumum % Wt:10.
Maxumum % Wt:30.

Name:SYNTHETIC RESINS
Minumum % Wt:24.
Maxumum % Wt:40.

Name:VEGETABLE OIL
Minumum % Wt:15.
Maxumum % Wt:30.

Name:POLYMERIC WAX BLENDS
Minumum % Wt:5.
Maxumum % Wt:10.

Name:ORGANIC PIGMENTS
Minumum % Wt:15.
Maxumum % Wt:25.

=====================  Hazards Identification  =====================

Health Hazards Acute and Chronic:EYES: DIRECT CONTACT MAY CAUSE EYE
    IRRITATION. SKIN: PROLONGED CONTACT MAY CAUSE MINOR SKIN
    IRRITATION. INGESTION: NOT A NORMAL ROUTE OF ENTRY.
Medical Cond Aggravated by Exposure:PERSONS WITH DERMITITIS SHOULD
    AVOID SKIN CONTACT.

=======================  First Aid Measures  =======================

First Aid:EYE: FLUSH WITH WATER. SKIN: WASH WITH SOAP AND WATER.
    INGESTION: DO NOT INDUCE VOMITING. GET MEDICAL AID.

=====================  Fire Fighting Measures  =====================

Flash Point Method:CC
Flash Point:=121.1C, 250.F
250F
Extinguishing Media:CO2, FOAM, DRY CHEMICAL
Fire Fighting Procedures:USE WATER TO KEEP CONTAINERS COOL. WATER WILL
    NOT BE EFFECTIVE IN FIGHTING FIRES.
Unusual Fire/Explosion Hazard:DENSE SMOKE MAY BE GENERATED WHILE
    BURNING.

==================  Accidental Release Measures  ==================

Spill Release Procedures:WIPE UP. DISPOSE OF WIPES IN APPROVED WASTE
    CONTAINER. IF PETROLEUM HYDROCARBON IS USED, PROVIDE SUFFICENT
    VENTILATION.

======================	Handling and Storage  ======================

Handling and Storage Precautions:AVOID STORAGE IN HOT AREAS. KEEP
    CONTAINERS CLOSED WHEN NOT IN USE.
Other Precautions:READ AND FOLLOW LABEL PRECAUTIONS. DO NOT REUSE
    CONTAINER.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:NOT REQUIRED
Ventilation:GENERAL VENTILATION
Protective Gloves:NOT REQUIRED UNLESS PRESSES ARE WASHED WITH SOLVENT
Supplemental Safety and Health

==================  Physical/Chemical Properties  ==================

Boiling Pt:=260.C, 500.F
B.P. Text:500-590 F
Vapor Density:+AIR
Spec Gravity:H2O=1 HEAVIER
Evaporation Rate & Reference:BUTYL ACETATE=1 SLOWER
Solubility in Water:INSOLUABLE
Appearance and Odor:BLACK OR COLORED PASTE OILY ODOR
Percent Volatiles by Volume:10-30

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES

====================  Disposal Considerations  ====================

Waste Disposal Methods:DISPOSAL SHOULD BE DONE IN ACCORDANCE WITH
    FEDERAL, STATE AND LOCAL REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.

*** END OF RECORD ***