=====================  Product Identification  =====================

MSDS NAME:PROPRIETARY BLEND FREKOTE 1711 AEROSOL SILICONE SOLUTION
NIIN:01-105-8625
Status Code:A
MSDS Number: CLLSG
=== Responsible Party ===
Company:THE DEXTER CORPORATION
Address:ONE DEXTER DRIVE
City:SEABROOK
State:NH
ZIP:03874
Country:US
Info Phone Num:603-474-5541
Emergency Phone Num:1-800-424-9300
Preparer's Name:ERNEST CARTER
Chemtrec Ind/Phone:(800)424-9300
CAGE:04373
=== Contractor Identification ===
Company:THE DEXTER CORPORATION
Address:ONE DEXTER DRIVE
Box:City:SEABROOK
State:NH
ZIP:03874
Country:US
Phone:603-474-5541
CAGE:04373

=============  Composition/Information on Ingredients  =============

Name:STODDARD SOLVENT
CAS:8032-32-4
Code:F
RTECS #:OI6180000
Minumum % Wt:1.
Maxumum % Wt:3.
OSHA PEL:100 PPM
ACGIH TLV:1370 MG/M3;300 PPM

Name:ALIPHATIC HYDROCARBON
CAS:64742-48-9
Code:F
Minumum % Wt:76.
Maxumum % Wt:78.
OSHA PEL:400 PPM
ACGIH TLV:200 PPM

Name:SILICONE BLEND
< Wt:10.

Name:PROPANE
CAS:74-98-6
RTECS #:TX2275000
= Wt:14.81
OSHA PEL:1800 MG/M3;1000 PPM

=====================  Hazards Identification  =====================

Effects of Overexposure:CAN CAUSE EYE IRRITATION. PROLONGED OR REPEATED
    CONTACT CAN CAUSE SKIN IRRITATION. CAN BE IRRITATING TO THE
    RESPIRATORY SYSTEM.EXCESSIVE EXPOSURE CAN CAUSE DIZZINESS, NAUSEA,
    HEADACHES, AND OTHER CENT RAL NERVOUS SYSTEM EFFECTS.

=======================  First Aid Measures  =======================

Eyes: FLUSH WITH WATER FOR 15 MINUTES WHILE HOLDING EYELIDS
    OPEN.  SKIN: FLUSH AFFECTED AREA WITH WATER IMMEDIATELY.
    INHALATION: REMOVE TO FRESH AIR.  INGESTION: DO NOT INDUCE
    VOMITING.

=====================  Fire Fighting Measures  =====================

Flash Point:NONE
Autoignition Temp:Autoignition Temp Text:NONE
Lower Limits:NONE
Upper Limits:NONE
Extinguishing Media:FOAM, DRY CHEMICAL OR CO2.
Fire Fighting Procedures:SELF-CONTAINED BREATHING APPARATUS AND
    PROTECTIVE CLOTHING SHOULD BE WORN IN FIGHTING FIRES.
Unusual Fire/Explosion Hazard:KEEP AWAY FROM HOT SURFACES.

==================  Accidental Release Measures  ==================

Spill Release Procedures:CLEAR AREA. PROVIDE ADEQUATE VENTILATION.
    COLLECT WITH ABSORBENT AND PREVENT RUN-OFF. REMOVE ALL POTENTIAL
    IGNITION SOURCES. USE APPROPRIATE PROTECTIVE EQUIPMENT.

======================	Handling and Storage  ======================

Handling and Storage Precautions:STORE AWAY FROM HEAT AND FLAME. USE
    WITH ADEQUATE VENTILATION.
Other Precautions:AVOID CONTACT WITH SKIN AND BREATHING OF VAPORS.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:IF USE CONDITIONS GENERATE AIRBORNE
    CONTAMINATION, USE NIOSH RECOMMENDED RESPIRATORS APPROPRIATE FOR
    THE AIRBORNE LEVELS GENERATED.
Ventilation:AS REQUIRED TO CONTROL AIRBORNE CONTAMINATION.
Protective Gloves:SOLVENT RESISTANT.
Eye Protection:CHEMICAL SPLASH GOGGLES.
Other Protective Equipment:USE IMPERVIOUS CLOTHING IF NECESSARY TO
    AVOID SKIN CONTACT.
Work Hygienic Practices:NONE
Supplemental Safety and Health
NONE

==================  Physical/Chemical Properties  ==================

Boiling Pt:B.P. Text:NONE
Melt/Freeze Pt:M.P/F.P Text:NONE
Decomp Temp:Decomp Text:NONE
Vapor Pres:(MM HG) @23 C 2068-2327
Vapor Density:3.17
Spec Gravity:0.68+-0.02
Evaporation Rate & Reference:5 (N-BUTYL ACETATE=1)
Solubility in Water:INSOLUBLE
Appearance and Odor:COLORLESS SLIGHT ODOR
Percent Volatiles by Volume:95.8%

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
OXIDIZING MATERIAL CAN CAUSE A REACTION.
Stability Condition to Avoid:NONE
Hazardous Decomposition Products:MAY YIELD INCOMPLETELY  BURNED CARBON
    PRODUCTS.
Conditions to Avoid Polymerization:WILL NOT OCCUR.

====================  Disposal Considerations  ====================

Waste Disposal Methods:DISPOSE OF ACCORDING  TO FEDERAL, STATE AND
    LOCAL LAWS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.

*** END OF RECORD ***