=====================  Product Identification  =====================

MSDS NAME:EX-3510
NIIN:00-663-2673
MSDS Number: BFKFW
=== Responsible Party ===
Company:AMERON INDUSTRIAL COATINGS DIVISION
Address:201 N BERRY ST
City:BREA
State:CA
ZIP:92621-3904
Country:US
Info Phone Num:714-529-4597
Emergency Phone Num:714-529-4597
CAGE:09869
=== Contractor Identification ===
Company:AMERON INDUSTRIAL COATINGS DIVISION
Address:201 N BERRY ST
Box:City:BREA
State:CA
ZIP:92621-3904
Country:US
Phone:714-529-4597
CAGE:09869

=============  Composition/Information on Ingredients  =============

Name:TOLUENE  (SARA III)
CAS:108-88-3
RTECS #:XS5250000
Fraction by Wt: 46.0%
OSHA PEL:200 PPM/150 STEL
ACGIH TLV:50 PPM; 9293
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS

Name:ISOPROPYL ALCOHOL  (SARA III)
CAS:67-63-0
RTECS #:NT8050000
Fraction by Wt: 9.0%
OSHA PEL:400 PPM/500 STEL
ACGIH TLV:400 PPM/500STEL;9192

Name:ISOPROPYL ALCOHOL  (SARA III)
CAS:67-63-0
RTECS #:NT8050000
Fraction by Wt: 5.00%
OSHA PEL:400 PPM/500 STEL
ACGIH TLV:400 PPM/500STEL;9192

Name:ISOBUTYL ACETATE  (SARA III)
CAS:110-19-0
RTECS #:AI4025000
Fraction by Wt: 18.0%
OSHA PEL:150 PPM
ACGIH TLV:150 PPM; 9192
EPA Rpt Qty:5000 LBS
DOT Rpt Qty:5000 LBS

=====================  Hazards Identification  =====================

Effects of Overexposure:ANESTHETIC, IRR. OF RESPIRATORY TRACT OR ACUTE
    NERVOUS SYS. DEPRESSION, EYE & SKIN IRRITATION

=======================  First Aid Measures  =======================

First Aid:IN CASE OF CONTACT FLUSH SKIN AND EYES WITH WATER AND REMOVE
    CONTAMINATED CLOTHING. IF INHALED REMOVE TO FRESH AIR. CAL A
    PHYSICIAN IF CONDITIONS PERSIST.

=====================  Fire Fighting Measures  =====================

Flash Point:40F TCC
Lower Limits:1.3
Extinguishing Media:SMALL FIRES-CARBON DIOXIDE OR DRY CHEM. LARGE
    FIRES-FOAM
Fire Fighting Procedures:SELF-CONTAINED BREATHING APPARATUS FOR FIREMEN
Unusual Fire/Explosion Hazard:CLOSED CONTAINERS EXPOSED TO HEAT MAY
    EXPLODE

==================  Accidental Release Measures  ==================

Spill Release Procedures:REMOVE ALL SOURCES OF IGNITION. AVOID
    BREATHING VAPORS. REMOVE WITH INET ABSORBENT AND NON-SPARKING

======================	Handling and Storage  ======================

Handling and Storage Precautions:DO NOT STORE ABOVE 120F. STORE LARGE
    QUANTITIES IN BUILDINGS DESIGNED FOR STORAGE OF NFPA CLASS ONE
    FLAMMABLES.
Other Precautions:CONTAINERS SHOULD BE GROUNDED WHEN POURING. AVOID
    FREE FALL OF LIQUID IN EXCESS OF A FEW INCHES.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:USE NIOSH APPROVED PAINT RESPIRATOR OR AIR
    SUPPLIED RESPIRATOR
Ventilation:PROVIDE GENERAL DILUTION OR LOCAL EXHAUST AS NECESSARY
Supplemental Safety and Health
RESPIRATOR USE BASED ON CHEM CONC. AND CONDITION OF USE

==================  Physical/Chemical Properties  ==================

HCC:F2
Boiling Pt:B.P. Text:175-250F
Vapor Density:>1
Evaporation Rate & Reference:SLOWER THAN ETHER
Percent Volatiles by Volume:84.3

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
Stability Condition to Avoid:AVOID FIRE,HEAT AND HOT SURFACES

====================  Disposal Considerations  ====================

Waste Disposal Methods:DISPOSE IN ACCORDANCE WITH LOCAL,STATE AND
    FEDERAL REGULATIONS. DO NOT INCINERATE CLOSED CONTAINERS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.

*** END OF RECORD ***