===================== Product Identification =====================
MSDS NAME:LOCTITE GRADE D ANEROBIC ADHESIVE
NIIN:00-905-6818
MSDS Number: BFVXP
=== Responsible Party ===
Company:LOCTITE CORP.
Emergency Phone Num:203-278-1280X429
CAGE:0A083
=== Contractor Identification ===
Company:LOCTITE CORP.
Country:US
CAGE:0A083
Company:LOCTITE CORPORATION
Address:1001 TROUT BROOK CROSSING
Box:City:ROCKY HILL
State:CT
ZIP:06067-3910
Country:US
Phone:860-571-5100
CAGE:05972
============= Composition/Information on Ingredients =============
Name:TRIBUTYL AMINE
Fraction by Wt: <2%.
Name:ORGANIC HYDROPEROXIDE (APPROX 5.0%)
===================== Hazards Identification =====================
Effects of Overexposure:MAY CAUSE DERMATITIS ON PROLONGED CONTACT IN
SENSITIVE INDIVIDUALS
======================= First Aid Measures =======================
First Aid:SKIN & EYE:FLUSH W/WATER.INGESTION:KEEP CALM & OBTAIN MEDICAL
ATTENTION. LD50 >10,000 MG/KG-ACCORDING TO MFG.
===================== Fire Fighting Measures =====================
Flash Point:>200F CC
Extinguishing Media:CO*2, DRY CHEMICAL, FOAM
Fire Fighting Procedures:NONE
================== Accidental Release Measures ==================
Spill Release Procedures:FLUSH W/SOLVENTS, TAKING PRECAUTIONS FOR
POSSIBLE VAPORS & FIRE HAZARD OF SOLVENT USED.MIL-SPEC RECOMMENDS
WIPING OFF SPILL W/A CLOTH MOISTENED W/WATER OR TRICHLOROETHYLENE.
====================== Handling and Storage ======================
Handling and Storage Precautions:STORE BELOW 110F, TO RETAIN SHELF
LIFE.
Other Precautions:AVOID PROLONGED SKIN CONTACT.
============= Exposure Controls/Personal Protection =============
Protective Gloves:RECOMMENDED
Eye Protection:RECOMMENDED
Supplemental Safety and Health
VAP PRESS: <5.0 AT 80F. SOLUBILITY IN WATER: LOW. ACCORDING TO MFR
TRIBUTYL AMINE IS AN IRRITANT. ORGANIC HYDROPEROXIDE IS AN OXIDIZER
================== Physical/Chemical Properties ==================
HCC:N1
NRC/State Lic Num:NA
Boiling Pt:B.P. Text:>300F
Spec Gravity:1.071
Appearance and Odor:MILD ODOR;ORANGE LIQUID
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
==================== Disposal Considerations ====================
Waste Disposal Methods:DISPOSE IN ACCORDANCE W/FED, STATE & LOCAL
CODES.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|