===================== Product Identification =====================
MSDS NAME:BONDMASTER M777B
NIIN:01-006-9439
MSDS Number: BGCVJ
=== Responsible Party ===
Company:NATIONAL STARCH AND CHEMICAL CORP.
Emergency Phone Num:201-755-4100
CAGE:01666
=== Contractor Identification ===
Company:NATIONAL STARCH AND CHEMICAL CORP BONDMASTER DIV
Address:225 BELLEVILLE AVE
Box:City:BLOOMFIELD
State:NJ
ZIP:07003-3584
Country:US
CAGE:01666
============= Composition/Information on Ingredients =============
Name:POLYAMIDE RESIN-LOW AMINE CONTENT
===================== Hazards Identification =====================
Effects of Overexposure:SKIN:PRLNG/RPTD CONTACT CAUSES IRRITATION OR
DERMATITIS IN ALLERGIC PERSONS. EYE:IRRITANT.
======================= First Aid Measures =======================
First Aid:SKIN:WASH WITH SOAP & WATER. EYE:FLUSH WITH COPIOUS AMOUNTS
OF WATER FOR 15 MINUTES, CALL MD. CALL MD FOR ANY UNUSUAL EXPOSURE.
===================== Fire Fighting Measures =====================
Flash Point:500F;260C, OC
Extinguishing Media:CO*2,FOAM, DRY CHEMICAL
================== Accidental Release Measures ==================
Spill Release Procedures:MOP UP, FLUSH WITH WATER
====================== Handling and Storage ======================
Handling and Storage Precautions:STORE AT ROOM TEMPERATURE IN A DRY
PLACR. REFER TO SPI BULLETIN ON HANDLING EPOXY COMPOUNDS FOR
FURTHER INFO.
============= Exposure Controls/Personal Protection =============
Respiratory Protection:MFR STATES NOT USUALLY REQUIRED
Ventilation:MECHANICAL & LOCAL EXHAUST RECOMMENDED TO KEEP BELOW TLV.
Protective Gloves:RECOMMENDED
Eye Protection:SFTY GLASS W/SIDE SHIELDS
Supplemental Safety and Health
SPECIFIC GRAVITY & FLASH POINT VALVES ARE APPROSIMATE. PART B OF A TWO
PART KIT.
================== Physical/Chemical Properties ==================
HCC:N1
Spec Gravity:0.99
Solubility in Water:SLIGHT
Appearance and Odor:YELLOWISH VISCOUS LIQUID;TYPICAL AMINE ODOR.
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
EPOXY RESINS & ACIDS.
Conditions to Avoid Polymerization:ACIDS & EPOXY RESINS.
==================== Disposal Considerations ====================
Waste Disposal Methods:DISPOSE IAW FEDERAL,STATE 6 LOCAL CODES
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|