=====================  Product Identification  =====================

MSDS NAME:EXT. ACRYLIC LATEX WHITE HOUSE PAINT, L108
NIIN:00F004617
MSDS Number: BBQQW
=== Responsible Party ===
Company:ALASKAN PAINT MFG/ANCHORAGE, AL 99501
Emergency Phone Num:(907) 272-2942
CAGE:ALASK
=== Contractor Identification ===
Company:ALASKAN PAINT MFG CO/ANCHORAGE, AK 99501
Address:2040 SPAR AVE
Box:City:ANCHORAGE
CAGE:ALASK

=============  Composition/Information on Ingredients  =============

Name:ETHYLENE GLYCOL  (SARA III)
CAS:107-21-1
RTECS #:KW2975000
Fraction by Wt: <5%
OSHA PEL:C 50 PPM
ACGIH TLV:C 50 PPM,VAPOR; 9192
EPA Rpt Qty:1 LB
DOT Rpt Qty:1 LB

Name:PHENYLMERCURIC ACETATE  (SARA III)
CAS:62-38-4
RTECS #:OV6475000
Fraction by Wt: <.05%
OSHA PEL:0.1 MG HG/M3;CEIL;S
ACGIH TLV:0.01 MG HG/M3; 9192
EPA Rpt Qty:100 LBS
DOT Rpt Qty:100 LBS

=====================  Hazards Identification  =====================

Effects of Overexposure:MAY BE IRRITATING TO THE EYES/SKIN/MUCOUS
    MEMBRANE/RESP TRACT/HEADACHE/NAUSEA/VOMITING/DIARRHEA.

=======================  First Aid Measures  =======================

First Aid:INHALATION: REMOVE TO FRESH AIR. SKIN: WASH EXPOSED AREA WITH
    SOAP/WATER, REMOVE CONTAMINATED CLOTHING. EYES: FLUSH W/WATER FOR
    AT LEAST 15 MINUTES. INGESTION: IF VICTIM IS CONSCIOUS, INDUCE
    VOMITING.  GIVE TWO GLASSES OF WATER. CALL PHYSICIAN.

=====================  Fire Fighting Measures  =====================

Extinguishing Media:NON-FLAMMABLE
Fire Fighting Procedures:PAINT MAY SPATTER IF TEMP EXCEEDS BOILING
    POINT OF WATER.

==================  Accidental Release Measures  ==================

Spill Release Procedures:STOP SPILL AT SOURCE, DIKE AREA OF SPILL TO
    PREVENT SPREADING. ABSORB LIQ. ON VERMICITE/FLOOR ABSORBENT/OTHER
    INERT MATERIAL. PLACE IN SUITABLE CONTAINER FORECOVERY OR DISPOSAL.
    FLOORS MAY BE SLIPPERY , CARE SHOULD BE TAKEN TO AVD FALLS.

======================	Handling and Storage  ======================

Handling and Storage Precautions:KEEP FROM FREEZING. PAINT SPRAY MUST
    NOT BE INHALED; RESP SHOULD BE PROVIDED IF ENGINEERING COROL AREN'T
    ADEQUATE.
Other Precautions:KEEP CONTAINERS CLOSED WHEN NOT IN USE.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:NIOSH RESPIRATOR IF >TLV.
Protective Gloves:IMPERVIOUS
Eye Protection:SAFETY GLASSES OR GOGGLES
Supplemental Safety and Health
MSDS DATE: 15 JAN 86. WGT PER GALLON: 12.2 PDS. PH: 8.0-9.0

==================  Physical/Chemical Properties  ==================

Vapor Density:>AIR
Evaporation Rate & Reference:SLOWER THAN ETHER
Appearance and Odor:UNTINTED - WHITE LIQUID PAINT
Percent Volatiles by Volume:40%

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
Hazardous Decomposition Products:OXIDES OF CARBON/OXIDES OF
    NITROGEN/MONOMER FUMES.

====================  Disposal Considerations  ====================

Waste Disposal Methods:DISPOSE OF WASTE ACCORDING TO LOCAL, STATE, AND
    FEDERAL REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.

*** END OF RECORD ***