=====================  Product Identification  =====================

MSDS NAME:EPIPHEN 825-A RESIN
NIIN:00F008215
MSDS Number: BGTWT
=== Responsible Party ===
Company:MONOMER-POLYMER & DAJAC LABS, INC.
Address:36 TERRY DRIVE
City:TREVOSE
State:PA
ZIP:19047
Info Phone Num:(215) 364-1155
Emergency Phone Num:(215) 364-1155
CAGE:4Y418
=== Contractor Identification ===
Company:MONOMER-POLYMER & DAJAC LABS., INC.
Address:36 TERRY DRIVE
Box:City:TREVOSE
State:PA
ZIP:19047
Phone:(215) 364-1155
CAGE:4Y418

=============  Composition/Information on Ingredients  =============

Name:EPOXIDIZED NOVOLAC RESIN 0.
Fraction by Wt: 80%

Name:GLYCERYL TRIGLYCIDYL ETHER
Fraction by Wt: 20%

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:LD50 = >2000 MG/KG
Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:NO
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:INHALATION: NOT A PROBLEM UNLESS
    HEATED TO HIGH TEMPERATURES. SKIN: MINOR IRRITATION, MAY BE
    SENSITIZER. NOT ABSORBED THROUGH SKIN. EYES: NO CORNEAL INJURY.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:INHALATION: NOT A PROBLEM UNLESS HEATED TO HIGH
    TEMPERATURE. SKIN: MINOR IRRITATION, MAY BE SENSITIZER. NOT
    ABSORBED THROUGH SKIN. EYES: NO CORNEAL INJURY.

=======================  First Aid Measures  =======================

Eyes: FLUSH WITH WATER. SKIN: WASH WITH PLENTY OF SOAP &
    WATER. REMOVE & WASH CONTAMINATED CLOTHING. INHALATION: REMOVE TO
    FRESH AIR. OBTAIN MEDICAL ATTENTION.

=====================  Fire Fighting Measures  =====================

Flash Point Method:COC
Flash Point:490F
Extinguishing Media:FOAM, CO2, DRY CHEMICAL
Fire Fighting Procedures:NONE
Unusual Fire/Explosion Hazard:NONE

==================  Accidental Release Measures  ==================

Spill Release Procedures:SOAK UP WITH ABSORBANT OR SCRAPE UP. RESIDUE
    CAN BE REMOVE WITH NON-FLAMMABLE SOLVENT SUCH AS METHYLENE
    CHLORIDE.

======================	Handling and Storage  ======================

Handling and Storage Precautions:AVOID SKIN & EYE CONTACT. AVOID
    BREATHING VAPORS OF HEATED MATERIAL.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:NONE NEEDED IN NORMAL CONDITIONS.
Ventilation:MECHANICAL
Protective Gloves:POLYETHYLENE OR RUBBER
Eye Protection:SAFETY GLASSES
Supplemental Safety and Health
WT PER GAL: 9.5-10.0

==================  Physical/Chemical Properties  ==================

Spec Gravity:0.5-1.0
Evaporation Rate & Reference:NIL
Appearance and Odor:THICK LIGHT TAN LIQUID-LITTLE ODOR.

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
BASES, EXCESS OF CURING AGENT
Stability Condition to Avoid:EXCESS HEATING OVER LONG PERIODS OF TIME.
Conditions to Avoid Polymerization:EXCESS OF CURING AGENT

====================  Disposal Considerations  ====================

Waste Disposal Methods:INCINERATE OR BURY IN LANDFILL WHERE PERMITTED.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.

*** END OF RECORD ***