=====================  Product Identification  =====================

MSDS NAME:MCLUBE 1720 #8393551-1A
NIIN:00F005470
MSDS Number: BBSPB
=== Responsible Party ===
Company:MCGEE INDUSTRIES/ASTON, PA 19014
Emergency Phone Num:(215) 459-1890
CAGE:FO077
=== Contractor Identification ===
Company:MCGEE IND INC
Address:9 CROZERVILLE RD
Box:City:ASTON
State:PA
ZIP:19014
Country:US
Phone:800-262-5823
CAGE:04672
Company:MCGEE INDUSTRIES/ASTON, PA 19014
CAGE:FO077

=============  Composition/Information on Ingredients  =============

Name:METHYL CHLOROFORM (1,1,1-TRICHLOROEHANE)  (SARA III)
CAS:71-55-6
RTECS #:KJ2975000
Fraction by Wt: 70%
OSHA PEL:350 PPM/450 STEL
ACGIH TLV:350 PPM/450STEL;9192
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS
Ozone Depleting Chemical:1

Name:ISOPROPYL ALCOHOL  (SARA III)
CAS:67-63-0
RTECS #:NT8050000
Fraction by Wt: 2%
OSHA PEL:400 PPM/500 STEL
ACGIH TLV:400 PPM/500STEL;9192

Name:TOLUENE  (SARA III)
CAS:108-88-3
RTECS #:XS5250000
Fraction by Wt: 2%
OSHA PEL:200 PPM/150 STEL
ACGIH TLV:50 PPM; 9293
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS

=====================  Hazards Identification  =====================

Effects of Overexposure:INHALATION: LIGHT HEADEDNESS, SHORTNESS OF
    BREATH, POSSIBLE NARCOSIS.

=======================  First Aid Measures  =======================

First Aid:SOLVENT INHALATION: REMOVE TO FRESH AIR, CALL PHYSICIAN,
    DON'T GIVE EPINEPHRINE OR SIMILAR DRUGS.

=====================  Fire Fighting Measures  =====================

Flash Point:NONE
Lower Limits:8.0%
Upper Limits:10.5
Extinguishing Media:WATER/FOG
Fire Fighting Procedures:NONE
Unusual Fire/Explosion Hazard:IN PRESENCE OF OPEN FLAME CAN PRODUCT
    FUMES REQUIRING RESPIRATORS.

==================  Accidental Release Measures  ==================

Spill Release Procedures:VENTILATE AREA, WIPE UP SPILL AS AREA CAN
    BECOME SLIPPERY.

======================	Handling and Storage  ======================

Handling and Storage Precautions:AVOID TEMP EXTREMES, CONTAINERS MAY
    DEVELOP PRESSURE, OPEN WITH CARE. AVOID CONTAMINATION OF TACCO
    PRODUCTS WITH SOLIDS.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:AIR MASK IF VAPOR CONCENTRATION IS HIGH.
Ventilation:PROVIDE LOCAL EXHAUST POSITIVE VENTILATION TO KEEP TLV.
Protective Gloves:RECOMMENDED
Eye Protection:RECOMMENDED
Supplemental Safety and Health
MSDS DATE: 4/15/85. MANUFACTURED PRIOR TO APRIL 85 CONTAIN 5% XYLENE).

==================  Physical/Chemical Properties  ==================

Boiling Pt:B.P. Text:165-230F
Vapor Pres:100
Vapor Density:4.5
Spec Gravity:1.3
Evaporation Rate & Reference:(ETHER = 1) 2.5
Solubility in Water:NIL
Appearance and Odor:WHITE TRANSLUCENT LIQ DISPERSION W/ETHEREAL ODOR
Percent Volatiles by Volume:93%

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
ALKALI OR ALKALINE EARTH METALS.
Stability Condition to Avoid:AVOID BURNING IN OPEN FLAME
Hazardous Decomposition Products:>400F, HCL, HF, PHOSGENE, CO, PFIB,
    OTHER ORGANIC FLUORIDES.

====================  Disposal Considerations  ====================

Waste Disposal Methods:SOLVENTS WILL EVAPORATE, SOLID WASTE SHOULD BE
    BURIED IN ACCORDANCE WITH STATE AND LOCAL LAWS OR AT APPROVED
    DISPOSAL SITE.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.

*** END OF RECORD ***