===================== Product Identification =====================
MSDS NAME:PROPYLENE FUEL CYLINDER, #PF-1000
NIIN:00F005543
MSDS Number: BBSSF
=== Responsible Party ===
Company:TURNER INDUSTRIES, INC./SYCAMORE, IL 60178
Emergency Phone Num:(815) 895-4545
CAGE:EO078
=== Contractor Identification ===
Company:TURNER CO DIV OF CLEANWELD PRODUCTS CO
Address:821 PARK AVE
Box:6200
City:SYCAMORE
State:IL
ZIP:60178-2419
Country:US
Phone:815-895-4545
CAGE:61112
Company:TURNER INDUSTRIES,INC.
Address:821 PARK AVE
Box:City:SYCAMORE
State:IL
ZIP:60178-2419
Country:US
CAGE:EO078
============= Composition/Information on Ingredients =============
Name:PROPYLENE (PROPENE) (SARA III)
CAS:115-07-1
RTECS #:UC6740000
Fraction by Wt: 97%
ACGIH TLV:ASPHIXIANT; 9192
Name:PROPANE
CAS:74-98-6
RTECS #:TX2275000
Fraction by Wt: 3%
OSHA PEL:1000 PPM
ACGIH TLV:ASPHYXIANT; 9192
Name:METHANE
CAS:74-82-8
RTECS #:PA1490000
ACGIH TLV:ASPHYXIANT; 9192
Name:ETHANE
CAS:74-84-0
RTECS #:KH3800000
ACGIH TLV:ASPHYXIANT 9192
===================== Hazards Identification =====================
Effects of Overexposure:VERY HIGH LEVEL EXPOSURE MAY CAUSE ASPHYXIATION
BY OXYGEN EXCLUSION.
======================= First Aid Measures =======================
First Aid:INHALATION: FRESH AIR. KEEP PATIENT WARM. ADMINISTER OXYGEN
IF PATIENT IS INTOXICATED.
===================== Fire Fighting Measures =====================
Flash Point:-162F (CC)
Lower Limits:2.0%
Upper Limits:11.1
Extinguishing Media:CO2, FOAM, CLASS B OR C EXTINGUISHERS
Unusual Fire/Explosion Hazard:TYPICAL LPG
================== Accidental Release Measures ==================
Spill Release Procedures:LIQUID SPILLS WILL RESULT IN AN ACCUMULATION
OF GAS RATHER THAN LIQUID. PRECAUTION SULD BE TAKEN TO AVOID
SOURCES OF IGNITION.
====================== Handling and Storage ======================
Handling and Storage Precautions:STORE BELOW 125F.
============= Exposure Controls/Personal Protection =============
Respiratory Protection:U.S. BUREAU OF MINES APPROVED AIR OR SUPPLY MASK
IN EVENT OF SPILL
Ventilation:LOCAL EXHAUST: RECOMMENDED
Eye Protection:CHEMICAL GOGGLES
Other Protective Equipment:LIQUID CAN FREEZE SKIN USE GLOVES WHEN
HANDLING LIQUID.
Supplemental Safety and Health
MSDS DATE: 2/14/84.
================== Physical/Chemical Properties ==================
Boiling Pt:B.P. Text:-54F
Vapor Pres:783
Vapor Density:1.48
Spec Gravity:0.512
Solubility in Water:NEGLIGIBLE
Appearance and Odor:COLORLESS REFINERY GAS ODOR
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS
Stability Condition to Avoid:TEMP >125F, OPEN FLAMES, SPARKS & SOURCES
OF IGNITION.
Hazardous Decomposition Products:COMPLETE COMBUSTION - NONE, INCOMPLETE
- CO, CO2, H2O
Conditions to Avoid Polymerization:HIGH TEMP & PRESSURE IN PRESENCE OF
CATALYST.
==================== Disposal Considerations ====================
Waste Disposal Methods:ALLOW SPILLS TO EVAPORATE WITH ADEQUATE
VENTILATION. BURN UNDER CONTROLLED CONDITIONS USING PRESSURE
REGULATOR OR CONTROL VALVE AND APPROPRIATE BURNER.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|