=====================  Product Identification  =====================

MSDS NAME:PERFORMAX 401 CORROSION INHIBITOR
NIIN:01-313-9541
MSDS Number: BHYMF
=== Responsible Party ===
Company:DREW CHEMICAL CORP,DIV OF ASHLAND CHEMICAL CO
Address:ONE DREW CHEMICAL PLAZA
City:BOONTON
State:NJ
ZIP:07005
Country:US
Info Phone Num:201-263-7600
Emergency Phone Num:606-324-1133
CAGE:52454
=== Contractor Identification ===
Company:DREW CHEMICAL CORP,DIV OF ASHLAND CHEMICAL CO
Address:ONE DREW CHEMICAL PLAZA
Box:City:BOONTON
State:NJ
ZIP:07005
Country:US
Phone:606-324-1133
CAGE:52454

=============  Composition/Information on Ingredients  =============

Name:SODIUM HYDROXIDE  (SARA III)
CAS:1310-73-2
RTECS #:WB4900000
Fraction by Wt: 7%
Other REC Limits:NONE SPECIFIED
OSHA PEL:2 MG/M3
ACGIH TLV:C 2 MG/M3; 9293
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS

Name:SODIUM MOLYBDATE(VI)
CAS:7631-95-0
RTECS #:QA5075000
Fraction by Wt: 1-10%
Other REC Limits:NONE SPECIFIED
OSHA PEL:5 MG/M3 (MO)
ACGIH TLV:5 MG/M3 (MO); 9091

Name:SODIUM TOLYLTRIAZOLE
CAS:64665-57-2
Fraction by Wt: 1-10%
Other REC Limits:NONE SPECIFIED

Name:ORGANIC ACID (TYPE NOT SPECIFIED)
Fraction by Wt: 1-10%
Other REC Limits:NONE SPECIFIED

Name:PHOSPHONIC ACID DERIVATIVE
Fraction by Wt: 1-10%
Other REC Limits:NONE SPECIFIED

=====================  Hazards Identification  =====================

Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:NO
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:ACUTE: EYE AND SKIN BURNS.
    GASTROINTESTINAL & RESPIRATORY TRACT DAMAGE. CHRONIC: NONE
    SPECIFIED BY MANUFACTURER.
Explanation of Carcinogenicity:NONE OF THE COMPOUNDS IN THIS PRODUCT IS
    LISTED BY IARC, NTP, OR OSHA AS A CARCINOGEN.
Effects of Overexposure:EYE, SKIN, GASTROINTESTINAL & RESPIRATORY TRACT
    IRRITATION AND BURNS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

=======================  First Aid Measures  =======================

First Aid:INHALATION:REMOVE TO FRESH AIR. IF BREATHING IS DIFFICULT,
    GIVE OXYGEN. IF BREATHING HAS STOPPED, GIVE ARTIFICIAL RESPIRATION.
    GET MEDICAL ATTENTION. EYES AND SKIN:IMMEDIATELY FLUSH WITH PLENTY
    OF WAT ER FOR 15 MINUTES. HOLD EYELIDS OPEN. REMOVE CONTAMINATED
    CLOTHING. GET IMMEDIATE MEDICAL ATTENTION. INGESTED:DO NOT INDUCE
    VOMITING. GIVE WATER TO DRINK IF CONSCIOUS. GET IMMEDIATE MEDICAL
    ATTENTION.

=====================  Fire Fighting Measures  =====================

Autoignition Temp:Autoignition Temp Text:NONE
Extinguishing Media:USE WATER FOG, CARBON DIOXIDE, FOAM, OR DRY
    CHEMICAL.
Fire Fighting Procedures:FIRE FIGHTERS SHOULD USE NIOSH APPROVED SCBA &
    FULL PROTECTIVE EQUIPMENT WHEN FIGHTING CHEMICAL FIRE.
Unusual Fire/Explosion Hazard:NEVER USE WELDING OR CUTTING TORCH ON OR
    NEAR DRUM (EVEN EMPTY) BECAUSE PRODUCT (EVEN JUST RESIDUE) CAN
    IGNITE EXPLOSIVELY.

==================  Accidental Release Measures  ==================

Spill Release Procedures:SMALL SPILL: WIPE/SOAK UP WITH PAPER TOWEL OR
    INERT ABSORBENT. PUT IN DISPOSAL CONTAINER. LARGE SPILL: EVACUATE
    AND VENTILATE AREA. DIKE TO RETAIN RUN OFF. VACUUM UP OR PUMP FREE
    LIQUID INTO DISPOSAL  DRUM. ABSORB REMAINDER WITH INERT MATERIAL.
Neutralizing Agent:DILUTE WITH WATER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:KEEP FROM FREEZING. CONTAINERS OF THIS
    MATERIAL MAY BE HAZARDOUS WHEN EMPTIED, SINCE EMPTIED CONTAINERS
    RETAIN PRODUCT RESIDUES AS VAPOR, LIQUID, ETC.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:WEAR A NIOSH/MSHA APPROVED AIR SUPPLIED
    RESPIRATOR IF VENTILATION DOES NOT MAINTAIN INHALATION EXPOSURES
    BELOW PEL/TLV. OSHA REGULATIONS ALSO PERMIT OTHER NIOSH/MSHA
    RESPIRATORS UNDER SPECIFIED CONDIT IONS.
Ventilation:PROVIDE SUFFICIENT MECHANICAL (GENERAL) VENTILATION TO
    MAINTAIN EXPOSURE BELOW TLV(S).
Protective Gloves:NEOPRENE GLOVES
Eye Protection:CHEMICAL SPLASH GOGGLES & FACE SHIELD
Other Protective Equipment:EYE WASH STATION AND SAFETY SHOWER.
    INDUSTRIAL-TYPE WORK CLOTHING, BOOTS, AND APRON AS REQUIRED.
Work Hygienic Practices:OBSERVE GOOD PERSONAL HYGIENE PRACTICES.
    LAUNDER CONTAMINATED CLOTHING BEFORE REUSE. KEEP WORK AREA CLEAN.
Supplemental Safety and Health
AVOID PROLONGED OR REPEATED EXPOSURE. DO NOT GET ON SKIN OR IN EYES. DO
    NOT BREATHE VAPORS OR MISTS. DO NOT INGEST. READ PRECAUTIONS ON
    LABEL BEFORE USE. ENGINEERING OR ADMINISTRATIVE CONTROLS SHOULD  BE
    IMPLEMENTED TO REDUCE EXPOSURE.

==================  Physical/Chemical Properties  ==================

HCC:B1
Boiling Pt:=100.C, 212.F
B.P. Text:212F,100C
Vapor Pres:17.5
Spec Gravity:1.18-1.20
pH:13
Solubility in Water:COMPLETE
Appearance and Odor:CLEAR COLORLESS TO HAZY YELLOW LIQUID
Percent Volatiles by Volume:70-85

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
STRONG MINERAL ACIDS
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:NONE SPECIFIED BY MANUFACTURER.

====================  Disposal Considerations  ====================

Waste Disposal Methods:DISPOSAL SHOULD BE MADE IN ACCORDANCE WITH ALL
    APPLICABLE FEDERAL, STATE AND LOCAL REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.

*** END OF RECORD ***