SAFETY DATA SHEET
1. PRODUCT AND COMPANY IDENTIFICATION
Product name: SOLDERON ST-380 PRIMARY
Rohm and Haas Electronic Materials Asia Ltd.
Supplier
15 On Lok Mun Street, On Lok Tsuen
Fanling, N.T., Hong Kong
Telephone: 852-26806888
Emergency telephone number
Hong Kong Emergency Phone (852) 2680-6113
Number
2. COMPOSITION/INFORMATION ON INGREDIENTS
This product is a preparation.
Component Concentration Classification
CAS-No. EINECS-No.
polyalkylene glycol 10.0 - < 50.0 % Xi R36/38, R52/53
3. HAZARDS IDENTIFICATION
Not classified as hazardous according to regulatory criteria.
4. FIRST AID MEASURES
Inhalation: Remove from exposure. If there is difficulty in breathing, give oxygen. Seek medical
attention if symptoms persist.
Skin contact: Wash skin with water. Continue washing for at least 15 minutes. Obtain medical
attention if blistering occurs or redness persists.
Eye contact: Immediately flush the eye with plenty of water for at least 15 minutes, holding the eye
open. Obtain medical attention if soreness or redness persists.
Ingestion: Wash out mouth with water. Have victim drink 1-3 glasses of water to dilute stomach
contents. Immediate medical attention is required Never administer anything by mouth if a victim is
losing conciousness, is unconcious or is convulsing.
Notes to physician
Page 1 of 5 Revision date 02.09.2004
SOLDERON ST-380 PRIMARY
Treat symptomatically.
5. FIRE-FIGHTING MEASURES
Not readily combustible.
Suitable extinguishing
Select extinguishing agent appropriate to other materials involved.
media:
Specific hazards during fire fighting: No specific measures necessary.
Special protective equipment for fire-fighters: Wear full protective clothing and self-contained
breathing apparatus.
Further information: This product may give rise to hazardous vapors in a fire.
6. ACCIDENTAL RELEASE MEASURES
Personal precautions
Wear suitable protective clothing.
Environmental precautions
Prevent the material from entering drains or water courses.
Do not discharge directly to a water source.
Advise Authorities if spillage has entered watercourse or sewer or has contaminated soil or vegetation.
Methods for cleaning up
Soak up with inert absorbent material and dispose of as hazardous waste.
7. HANDLING AND STORAGE
Handling
Use only in well-ventilated areas. Avoid breathing vapor. Avoid contact with eyes, skin and clothing.
Keep container tightly closed.
Further information on storage conditions: No special precautions necessary.
Storage
Storage conditions: Store in original container. Storage area should be: cool dry well ventilated
out of direct sunlight away from incompatible materials
8. EXPOSURE CONTROLS / PERSONAL PROTECTION
Exposure limit(s)
Exposure limits are listed below, if they exist.
Exposure controls
Eye protection: goggles
Page 2 of 5 Revision date 02.09.2004
SOLDERON ST-380 PRIMARY
Hand protection: Nitrile rubber gloves. Other chemical resistant gloves may be recommended by
your safety professional. Gloves should be removed and replaced immediately if there is any
indication of degradation or chemical breakthrough.
Skin and body protection: Normal work wear.
Respiratory protection: The specific respirator selected must be based on the airborne concentration
found in the workplace and must not exceed the working limits of the respirator.
Engineering measures: Engineering methods to prevent or control exposure are preferred.
Methods include process or personnel enclosure, mechanical ventilation (local exhaust), and control of
process conditions.
9. PHYSICAL AND CHEMICAL PROPERTIES
liquid
Physical state
Light amber
Colour
pungent
Odour
5.5 - 7.5
pH
>100 掳C
Boiling point/range
Nonflammable
Flash point
Similar to water
Vapour pressure
Heavier than air.
Relative vapour density
completely soluble
Water solubility
1.01
Relative density
Slower than ether
Evaporation rate
0 g/cm3
VOC's
NOTE: The physical data presented above are typical values and should not be construed as a
specification.
10. STABILITY AND REACTIVITY
Stable under normal conditions.
Hazardous reactions
Exposure to sunlight. High temperatures
Conditions to avoid
Strong oxidizing agents Strong acids
Materials to avoid
Carbon monoxide, carbon dioxide, ammonia, hydrocarbons,
Hazardous
decomposition
products
Will not occur.
polymerization
Page 3 of 5 Revision date 02.09.2004
SOLDERON ST-380 PRIMARY
11. TOXICOLOGICAL INFORMATION
Toxicological information on this product or its components appear in this section when such data is
available.
12. ECOLOGICAL INFORMATION
Ecotoxicological information on this product or its components appear in this section when such data
is available.
13. DISPOSAL CONSIDERATIONS
Environmental precautions: Prevent the material from entering drains or water courses.
Do not discharge directly to a water source.
Advise Authorities if spillage has entered watercourse or sewer or has contaminated soil or vegetation.
Disposal
Dispose in accordance with all local, state (provincial), and federal regulations.
Empty containers may contain hazardous residues. This material and its container must be disposed
of in a safe way. Do not remove label until container is thoroughly cleaned.
14. TRANSPORT INFORMATION
Classification for ROAD and Rail transport:
Not regulated (Not dangerous for transport)
Classification for SEA transport (IMO-IMDG):
Not regulated (Not dangerous for transport)
Classification for AIR transport (IATA/ICAO):
Not regulated (Not dangerous for transport)
Transportation classifications may vary by container volume and may be influenced by regional or
country variations in regulations
15. REGULATORY INFORMATION
Label
Classification and labeling have been performed according to regulations.
Safety data sheet available for professional user on request.
Page 4 of 5 Revision date 02.09.2004
SOLDERON ST-380 PRIMARY
US. Toxic Substances Control Act (TSCA) All components of this product are in compliance
with the inventory listing requirements of the U.S. Toxic Substances Control Act (TSCA) Chemical
Substance Inventory.
16. OTHER INFORMATION
Full text of the R-phrases given in Section 2
R36/38 Irritating to eyes and skin.
R52/53 Harmful to aquatic organisms, may cause long-term adverse
effects in the aquatic environment.
Emergency telephone number
Asia-Pacific +800 2537 8747
Asia-Pacific +65 6542 9595
India +800-650-1166
Indonesia +803-65-7576
Pakistan +800-11065-2-6542-7115
Sri Lanka (in Colombo) +430-800-2-6542-7115
United States of America +1-215-592-3000
European Region +33 (0) 140025045
Legend
ACGIH American Conference of Governmental Industrial Hygienists
BAc Butyl acetate
OSHA Occupational Safety and Health Administration
PEL Permissible Exposure Limit
STEL Short Term Exposure Limit (STEL):
TLV Threshold Limit Value
TWA Time Weighted Average (TWA):
| Bar denotes a revision from prior MSDS.
The information provided in this Safety Data Sheet is correct to the best of our knowledge, information
and belief at the date of its publication. The information given is designed only as a guidance for safe
handling, use, processing, storage, transportation, disposal and release and is not to be considered a
warranty or quality specification. The information relates only to the specific material designated and
may not be valid for such material used in combination with any other materials or in any process,
unless specified in the text.
Version: 1.4
Revision date: 02.09.2004
Print Date: 09/28/2007
Layout 298382
Page 5 of 5 Revision date 02.09.2004
|