AMSOIL Material Safety Data Sheet Date Issued/Revised: November 16, 2006
Supersedes: November 11, 2004
Section 1: Product and Company Identification
Manufacturer: AMSOIL, Inc. Telephone:
925 Tower Avenue CHEMTREC (Spill Emergency Only): 1-800-424-9300
Superior, WI 54880 Information: 715-392-7101
Product Codes HTM ISO 220 HTN ISO 320 HTO ISO 460
Product Label Name ................................. Synthetic High Temperature Lubricant
Product Use ............................................................................. LUBRICATING OIL
NFPA Rating
Section 2: Composition/Information on Ingredients
Red
OSHA HAZARDOUS COMPONENTS (29 CFR 1910.1200) Flammability
1
Blue Yellow
This product is not formulated to contain ingredients that have exposure limits
Health Reactivity
exceeding those established by US agencies.
White
1 0
Special
Section 3: Hazards Identification N/A
POTENTIAL HEALTH EFFECTS: Minor eye, inhalation and skin irritant.
*See Section 11 for toxicological information.
Section 4: First Aid Measures
EYE: Flush with water for 15-20 minutes. Seek medical attention if irritation develops.
SKIN: Wash immediately with soap and water. Remove contaminated clothing and launder before reuse.
Discard shoes and leather articles saturated with the product. Obtain medical advice if irritation occurs.
INHALATION: Remove exposed person to fresh air. If breathing is labored give oxygen. If breathing has
stopped apply artificial respiration. Get immediate medical attention.
INGESTION: DO NOT INDUCE VOMITING. If conscious, give 2 glasses of water. If vomiting does occur,
keep head below hips to reduce risk of aspiration. Get immediate medical attention.
Section 5: Fire Fighting Measures
FLAMMABILITY PROPERTIES:
HTM ISO 220 HTN ISO 320 HTO ISO 460
Flash Point 525 F(274 C) 525 F(274 C) 518 F(270 C)
Method ......................................... COC ASTM D-92
LFL/UFL ...........................................Not Determined
Auto-ignition Temperature ...............Not Determined
EXTINGUISHING MEDIA: Carbon dioxide, dry chemical, alcohol foam and water fog.
SPECIAL PROCEDURES: Water or foam may cause frothing. Use water to keep fire exposed surface cool.
Water spray may be used to flush spills away from exposure. Prevent runoff from fire
control or dilution from entering streams, sewers, or drinking water.
PROTECTIVE EQUIPMENT: For fires in enclosed areas, fire fighters must use self-contained breathing
apparatus.
Product Code: HT Series Synthetic High Temperature Lubricant Page 1 of 4
AMSOIL Material Safety Data Sheet Date Issued/Revised: November 16, 2006
Supersedes: November 11, 2004
Section 6: Accidental Release Measures
Isolate spill area. Provide adequate ventilation. Wear appropriate personal protection. Recover free product for recycle
and/or disposal. Add sand, earth or other suitable absorbent to spill area. Prevent entry into sewers and waterways.
Check under Transportation and Labeling (DOT/CERCLA) and Other Regulator Information Section (SARA) for
hazardous substances to determine regulatory reporting requirements for spill.
Section 7: Handling and Storage
HANDLING: Keep containers closed. Avoid contact with eyes, skin or clothing. Wash hands after handling. Empty
container may retain product residue which may exhibit hazards of product.
STORAGE: Keep away from heat or flame.
Section 8: Exposure Controls/Personal Protection
VENTILATION: Use adequate general or local exhaust ventilation to keep airborne concentrations below exposure
limits.
RESPIRATORY: Use a NIOSH approved respirator when necessary.
SKIN: Use Viton or Nitrile gloves to avoid prolonged or repeated skin contact.
EYE: Use splash goggles or face shield where splashing is expected or can occur.
3
EXPOSURE LIMITS: The Threshold Limit Value (TLV) of 5 mg/m is suggested for oil mist.
Section 9: Physical and Chemical Properties
HTM ISO 220 HTN ISO 320 HTO ISO 460
Physical State Liquid
Boiling Point Not Determined
Freezing/Melting Point -20 F(-29 C) -17 F(-27 C) -13 F(-25 C)
Vapor Pressure Negligible
Vapor Density (Air=1) Not Determined
Evaporation Rate Not Determined
Solubility in Water Negligible
Specific Gravity (Water=1) 0.9665 0.9646 0.9672
Density, lb./gal. 8.049 8.033 8.055
Volatility (Volume) Not Determined
VOC Not Determined
pH Essentially Neutral
Odor Mild, Bland Hydrocarbon Odor
Odor Threshold Not Determined
Appearance Light Straw Transparent Fluid
17.96 23.95 32.26
Viscosity, cSt @ 100 C
216.45 314.50 480.99
Viscosity, cSt @ 40 C
Viscosity Index 90 96 99
Product Code: HT Series Synthetic High Temperature Lubricant Page 2 of 4
AMSOIL Material Safety Data Sheet Date Issued/Revised: November 16, 2006
Supersedes: November 11, 2004
Section 10: Stability and Reactivity
STABILITY: Stable under moderately elevated temperatures and pressures.
INCOMPATIBILITY: Avoid contact with strong oxidants.
HAZARDOUS POLYMERIZATION: Will not occur.
HAZARDOUS DECOMPOSITION OF PRODUCT: Toxic oxides of carbon, aldehydes and other products of
incomplete combustion.
Section 11: Toxicological Information
ACUTE EXPOSURE
Eye Irritation: Moderate to strong eye irritation. Based on data from components or similar material.
Skin Irritation: Not expected to be a primary skin irritant. Based on data from components or similar
material. Prolonged or repeated skin contact as from clothing wet with material may
cause dermatitis. Symptoms may include redness, edema, drying, defatting, and cracking
of the skin.
Respiratory Irritation: If material is misted or if vapors are generated from heating, exposure may cause irritation
of mucous membranes and the upper respiratory tract similar to that observed with
mineral oil. Based on data from components or similar materials. Under good industrial
hygiene practices where all exposure limits are observed, respiratory irritation should not
be a problem.
CHRONIC EXPOSURE
Chronic Toxicity: No data available to indicate product present at greater than 1.0% are chronic health
hazards.
Carcinogenicity: No data available to indicate product present at greater than 0.1% are a carcinogenic
hazard.
Mutagenicity: No data available to indicate product present at greater than 1.0% present a mutagenic or
genotoxic hazard.
Reproductive Toxicity: No data available to indicate product present at greater than 1.0% present a reproductive
hazard.
Teratogenicity: No data available to indicate product present at greater than 1.0% present a teratogenic
hazards.
ADDITIONAL INFORMATION
Exposure Limits: Under conditions which may generate mists, observe the OSHA PEL of 5 mg per cubic
meter.
Section 12: Ecological Information
No data available on the adverse effects of this product on the environment.
Section 13: Disposal Considerations
If this product as supplied becomes a waste, it does not meet the criteria of a hazardous waste as defined under the
Resource Conservation and Recovery Act (RCRA) 40 CFR 261.
Product Code: HT Series Synthetic High Temperature Lubricant Page 3 of 4
AMSOIL Material Safety Data Sheet Date Issued/Revised: November 16, 2006
Supersedes: November 11, 2004
Section 14: Transport Information
This product is not classified as hazardous material for DOT shipping. For further information relative to spills
resulting from transportation incidents, refer to the latest DOT Emergency Response Guidebook for Hazardous
Materials.
Section 15: Regulatory Information
U.S. Federal Regulations
OSHA Table Z ............................................................................ Synthetic Base Stock (mist)
TSCA ............................................................................................................... Not Applicable
CERCLA 40 CFR 302.4 ................................................................................... Not Applicable
SARA Title III
Section 302 Extremely Hazardous ............................................................ Not Applicable
Section 311/312
Fire Hazard .............................................................................................................. Yes
Reactive Hazard .........................................................................................................No
Release of Pressure ...................................................................................................No
Acute Health Hazard ................................................................................................ Yes
Chronic Health Hazard ...............................................................................................No
Section 313 Toxic Chemical...................................................................... Not Applicable
U.S. State Regulations
California (Prop 65)
Does not contain chemicals known to the state of California to cause cancer.
International Regulations
WHMIS ................................................................................................. All components listed
Section 16: Other Information
The information and recommendations contained herein are, to the best of AMSOIL鈥檚 knowledge and belief, accurate
and reliable as of the date issued. AMSOIL makes no warranty or guarantee, expressed or implied, of their accuracy or
reliability, and AMSOIL shall not be liable for any loss or damage based upon the criteria supplied by the developers of
these rating systems, together with AMSOIL鈥檚 interpretation of the available data.
Product Code: HT Series Synthetic High Temperature Lubricant Page 4 of 4
|