Date Prepared: 08/05/02
ChemMasters
Supersedes: 8/01/01
Product Name: Polyseal WB Tint
Material Safety Data Sheet
1. Chemical Product and Company Information
Product Name: Polyseal WB Tint, All Colors
ChemMasters In Case of Emergency Contact:
300 Edwards Street CHEMTREC 800/424-9300
Madison, Ohio 44057
440-428-2105
2. Composition / Information on Ingredients
Components CAS # Exposure Limits % by Wt
OSHA(PEL/TWA) ACGIH (TLV/TWA) OTHER
Pigment NonHazardous NE NE - 45-65%
Water 7732-18-5 NE NE - 27-50%
Acrylic Polymer NonHazardous NE NE - 4- 10 %
Prioritary Surfactant Blend NE NE - 5%
3. Hazards Identification
CAUTION
May cause eye, skin and lung irritation
Potential Health Hazards - Acute
Eye: Direct contact with the liquid may cause eye irritation.
Skin: May cause slight irritation.
Inhalation: Excessive concentrations of vapors or mists may cause irritation of the nose, throat, and lungs.
Ingestion: Liquid is moderately toxic and may be harmful if swallowed; may produce CNS depression. May result
in vomiting. Aspiration of vomitus into the lungs must be avoided as even small quantities may result in aspiration
pneumonitis.
Potential Health Effects - Chronic
None Known
Carcinogenicity: NTP IARC Monographs OSHA Regulated
NO NO NO
4. First Aid Measures
Eye: Immediately flush with plenty of clean water for 15 minutes.
Skin: Remove contaminated clothing. Clean affected area(s) thoroughly with soap and water.
Inhalation: Remove to fresh air. If breathing is difficult, give oxygen. If not breathing, give artificial respiration.
Get medical attention.
Ingestion: Dring 2 glasses of water and seek medical attention! Do NOT induce vomiting. If vomiting occurs
spontaneously, keep head below hips to prevent aspiration of liquid into the lungs.
SEEK MEDICAL ATTENTION IF SYMPTOMS PERSIST.
1
Date Prepared: 08/05/02
Supersedes: 8/01/01
Product Name: Polyseal WB Tint
5. Fire Fighting Measures
Flash Point (method used): > 200 o F (TCC with Mixing)
Flammable Limits (% volume in air): Lower = NA Upper = NA
Auto Ignition Temperature: NA
Extinguishing Media: Extinguish with water fog, dry chemical, CO2 or foam.
Hazard Combustion Products: Carbon dioxide, carbon monoxide and/or organic compounds
Fire Fighting Instructions: Do not enter confined fire space without full bunker gear including a positive pressure,
NIOSH approved, self-contained breathing apparatus. Cool containers exposed to fire with water.
6. Accidental Release Measures
Spill: Shut off ignition sources. Absorb with inert material, then place in chemical waste container for later disposal.
7. Handling and Storage
Handling: Avoid inhalation of vapors and personal contact with product. Keep liquid away from heat, sparks and
flame.Use with adequate ventilation. 鈥淓mpty鈥? containers can contain explosive vapors. Do not cut, drill, grind, weld
or perform similar operations on or near containers. Do not pressurize drums to empty them.
Storage: Store containers tightly closed with adequate ventilation in a cool, dry area. Keep from Freezing
8. Exposure Controls / Personal Protection
Exposure Controls: Mechanical and local exhaust should be used for indoor use.
Personal Protection: Protective clothing, goggles, rubber gloves and a vapor respirator when TLV is exceeded.
9. Physical and Chemical Properties
Appearance: Varies in color, Paint like material
Odor: Paint like smell
Boiling Point: 212 oF
Melting Point: Not applicable
Vapor Pressure (mm/Hg): 17 @ 20oC
Vapor Density (Air = 1): 4.3
Solubility in Water: Negligible (100%)
Weight Per Gallon: 10 - 16 Lbs
Specific Gravity (H20 = 1): 1.2-1.9
Evaporation Rate (n-Butyl Acetate = 1): <1.0
10. Stability and Reactivity
Chemical Stability: Stable
Conditions to Avoid: Keep from freezing
Incompatibility (materials to avoid): Strong oxidizing agents. Strong acids, bases and select amines.
Hazardous Decomposition or By-products: Thermal decomposition in the presence of air may yield carbon
monoxide, carbon dioxide and/or unidentified organic compounds.
Hazardous Polymerization: Will not occur
11. Toxicological Information
NA
2
Date Prepared: 08/05/02
Supersedes: 8/01/01
Product Name: Polyseal WB Tint
12. Ecological Information
No data available.
13. Disposal Considerations
Dispose of in accordance with all federal, state, and local regulations. If uncertain of local requirements, contact
the proper environmental authorities for information on waste disposal in your area.
It is not listed Under RCRA 40 CFR 261.33
14. Transportation Information
For U S National Shipments:
Shipping Description: Non-Regulated Material
Emergency Response Guide Number: NA
Hazard Class: NA
15. Regulatory Information
OSHA: This material is non-hazardous under OSHA HCS
CERCLA Reportable Quantity: NA
SARA Title III:
Section 311/312 hazard categories: NA
Section 313 reportable ingredients:
Components CAS # Maximum %
None
16. Other Information
MSDS Status: Revised entire
Industrial Abbreviation Legend on page 4 of this MSDS.
3
Date Prepared: 08/05/02
Supersedes: 8/01/01
Product Name: Polyseal WB Tint
Industrial Abbreviation Legend
mg/m 3
ACGIH American Conference of Governmental Industrial milligrams per cubic meter
NIOSH National Institute for Occupational Safety and Health
Hygienists
NTP National Toxicology Program
CAA Clean Air Act (EPA)
CERCLA Comprehensive Environmental Response, OSHA Occupational Safety and Health Administration
PEL Permissible Exposure Limit
Compensation & Liability Act of 1980 (Superfund) (EPA)
ppm parts per million
CNS Central Nervous System
CWA Clean Water Act (EPA) RCRA Resource Conservation and Recovery Act (EPA)
SARA EPA鈥檚 Superfund Amendment and Reauthorization
DOT Department of Transportation
Act (EPA)
EPA Environmental Protection Agency
g/kg grams per kilogram STEL Short-Term Exposure Limit, ACGIH terminology
TLV Threshold Limit Value
IARC Internal Agency for Research on Cancer
TWA Time-Weighted Average
LC50 Lethal Concentration in which 50% of the test animals are
expected to die
LD50 Lethal Dose in which 50% of the test animals are
expected to die
THIS PRODUCT IS FORMULATED AND LABELED FOR
INDUSTRIAL AND COMMERCIAL APPLICATION ONLY
The information contained herein is given in good faith and based on data considered accurate. However, no warranty is
expressed or implied regarding the accuracy of these data or the results to be obtained from the use thereof. ChemMasters
assumes no responsibility for personal injury or property damage to vendees, users or third parties caused by the material.
Such vendees or users assume all risks associated with the use of the material.
4
This is the last page of this MSDS.
|