Material Safety Data Sheet
Alesko Sealing Compound
SECTION I: Product and Company Information
Product Name: Emergency Number:
Alesko Sealing Compound ALE250 (254) 289-2118
Manufacturer: Information Number:
EGS Electrical Group (254) 968-6071 Ext. 202
9377 West Higgins Road
Rosemont, IL 60018
CAS Number: Mixture Product Class: Epoxy Putty
Trade Name: Alesko Sealing Compound Product Code: 4770
DOT Hazard Class: UN Number:
Shipping Name: Putty Technical Name:
Shipping Name: Putty, NMFC 150110
Date Issued: June 6, 2003 Revision Date: May 27, 2008
Hazard Rating:
Health Fire Reactivity PPI
1 1 0 B
SECTION II: Ingredient and Hazard Information
Ingredient Name CAS Number Percent TSCA
Glycidyl Ethers of Bisphenol A. Resins 25068-38-6 15 - 40 Y
Hazardous Materials Identification System (HMIS):
Health Fire Reactivity PPI:
2 1 0 B
Diglycidyl Ethers of Bisphenol A. Resins 028064-14-4 3-7 Y
Hazardous Materials Identification System (HMIS):
Health Fire Reactivity PPI:
1 1 0 B
Alkanolamine/Piperazine Derivatives 102-71-6 0.5 鈥? 1.5 Y
Hazardous Materials Identification System (HMIS):
Health Fire Reactivity PPI:
3 2 0 B
All ingredients in this product are listed in the T.S.C.A inventory
.SECTION III: Physical Data
Form: Putty-like Appearance/Color: White/Light Yellow
Odor: Amine, Fishy Solubility (in water): Insoluble in Water
pH: Not Applicable Boiling Range: Not Applicable
Vapor Pressure (mmHg): Not Applicable Melting Point: Not Applicable
Evaporation Rate: Not Volatile Vapor Density: Not Volatile
% Volatile Weight: 0.% % Volatile: < 1%
VOC: < 1% Molecular Weight:
Heavy Elements (ppm): 0. Specific Gravity: 1.92
Note: The physical data represented above are typical values and should not be construed as a specification. For
additional physical data and details on use, please obtain a technical data sheet for this product.
Emergency Phone: (254) 289-2118
Information Phone: (254) 968-6071 Ext. 202
www.egseg.com
MSDS Alesko Sealing Compound.doc Page 1 of 4
Material Safety Data Sheet
Alesko Sealing Compound
SECTION IV: Fire and Explosion Hazard Data
Flammability Class:
Flash Range: None, Not Applicable Explosive Range: None, Not Applicable
Extinguishing Media:
Water spray, foam, CO2, dry chemicals.
Unusual Hazards:
Aldehydes, acids and oxides of carbon, nitrogen and sulfur.
Fire Fighting:
Fire fighters and others who may be exposed to the products of combustion should be equipped with NIOSH-
approved positive pressure self-contained breathing apparatus (SCBA) and full protective clothing.
SECTION V: Health Hazard Data
Route Species Exposure and Dose
Glycidyl Ethers of Bisphenol A. Resins
Oral Rat, adult LD50 5000. mg/Kg
Skin Rabbit, adult LD50 20000. mg/Kg
Diglycidyl Ethers of Bisphenol A. Resins
Oral Rat, adult LD50 5000. mg/Kg
Skin Rabbit, adult LD50 20000. mg/Kg
Alkanolamine/Piperazine Derivatives
Oral Rat, adult LD50 3300. PPM
Skin Rat, adult LD50 2000. PPM
Permissible Exposure Level: Not Applicable
Effects of Overexposure:
Inhalation: None Ingestion: Irritation of intestinal tract.
Skin Contact: Possible irritant and sensitizer Eye Contact: Possible irritant and sensitizer.
First Aid:
Inhalation: Remove to fresh air. Ingestion: Seek medical advice.
Skin Contact: Wash with plenty of soap and water. Eye Contact: Flush with water for at least 15 minutes,
seek medical advice.
Note: Never give anything by mouth to an unconscious person.
SECTION VI: Stability and Reactivity Data
Stability: Hazardous Polymerization:
This product is stable. Hazardous polymerization will not occur.
Incompatibility: Conditions to Avoid:
None None
Hazardous Decomposition Products:
Aldehydes, acids and oxides of carbon, nitrogen and sulfur.
Emergency Phone: (254) 289-2118
Information Phone: (254) 968-6071 Ext. 202
www.egseg.com
MSDS Alesko Sealing Compound.doc Page 2 of 4
Material Safety Data Sheet
Alesko Sealing Compound
SECTION VII: Spill and Leak Procedures
Steps to be Taken:
Spills or Leaks: Dispose in normal manner.
Waste Disposal Method:
Incinerate in furnace or bury in landfill in accordance with all applicable regulations; not a hazardous waste.
SECTION VIII: Exposure Controls/Personal Protection
Occupational Exposure Limits
ACGIH TLV ACGIH TLV-C ACGIH STEL OSHA STEL OSHA PEL
Glycidyl Ethers of Bisphenol A. Resins
N/est N/est N/est N/est N/est
Diglycidyl Ethers of Bisphenol A. Resins
N/est N/est N/est N/est N/est
Alkanolamine/Piperazine Derivatives
5.00 mg/m3 N/est N/est N/est N/est
Protective Equipment Types:
Eyes: Safety glasses or goggles. Respiratory: None required unless sanding or
abrading.
Gloves:
Appropriate impervious gloves. Because a variety of protective gloves exist, consult glove manufacturer to
determine the proper type for a specific operation.
Other: None required.
Ventilation:
General Mechanical: None Required Local Exhaust: Only if heated above 100 掳F (38 掳C)
SECTION IX: Handling and Storage
Handling:
Storage Conditions: Store in cool, dry, well-ventilated
Storage Temperature: < 90 掳F (32 掳C)
area.
Transfer:
No special precautions are needed. Follow good manufacturing and handling practices.
Personal Hygiene:
Wash thoroughly after handling, especially before eating, drinking, smoking and using restroom facilities. Wash
contaminated goggles, face shields and gloves. Professionally launder contaminated clothing before re-use.
Empty Container Precautions:
Attention! This container can be hazardous when empty. Follow label cautions even after the container is empty
since empty containers could retain product residues. Do not re-use empty containers for food, clothing, or
products for human or animal consumption, or where skin contact can occur.
Emergency Phone: (254) 289-2118
Information Phone: (254) 968-6071 Ext. 202
www.egseg.com
MSDS Alesko Sealing Compound.doc Page 3 of 4
Material Safety Data Sheet
Alesko Sealing Compound
Notice
The information and recommendations herein are, to the best of EGS Electrical Group鈥檚 knowledge and belief
accurate and reliable as of the date issued and are offered for the user鈥檚 consideration and examination. EGS
Electrical Group does not warrant or guarantee their accuracy or reliability and shall not be liable for any loss or
damage arising out of the use thereof. It is the user鈥檚 responsibility to satisfy itself that they are suitable and
complete for its particular use.
The Environmental Information included herein as well as the Hazardous Materials Identification System (HMIS)
ratings have been included by EGS Electrical Group in order to provide additional health and hazard classification
information. The ratings recommended are based upon the criteria supplied by the developers of these rating
systems, together with EGS Electrical Group鈥檚 interpretation of the available data.
Prepared by: James H. Sommer, P.E. Date: May 27, 2008
Emergency Phone: (254) 289-2118
Information Phone: (254) 968-6071 Ext. 202
www.egseg.com
MSDS Alesko Sealing Compound.doc Page 4 of 4
|