Search    ENTER KEYWORD
MSDS Material Safety Data Sheet
CAS

8001-22-7

File Name: elmusa_com---elm_concrete_asphalt_form_release_msds.asp
                                MATERIAL SAFETY DATA SHEET

PRODUCT NAME: ELM Concrete/Asphalt Form Release WS
MANUFACTURER鈥橲 I.D.: Water Soluble Concrete/Asphalt Form Release Fluid
CAS NUMBER: NA

SECTION I - MANUFACTURER'S IDENTIFICATION

SOURCE: Environmental Lubricants Manufacturing, Inc.
ADDRESS: 5526 Nordic Drive, Cedar Falls, IA 50613
24 HOUR EMERGENCY ASSISTANCE: Chemtrec: (800) 424-9300
GENERAL MSDS ASSISTANCE: (319) 277-9075
DATE PREPARED: 07/27/00
DATE REVISED: 05/15/08

SECTION II - COMPOSITION/INFORMATION ON INGREDIENTS


Compound CAS # OSHA TWA OSHA STEL ACGIH STEL
10 mg/m3
Soybean Oil 8001-22-7 --- ---

Surfactant Mixture** confidential --- --- ---



**The specific chemical identity is being withheld as a trade secret.
--- Not established

THE PRECISE COMPOSITION OF THIS PRODUCT IS PROPRIETARY INFORMATION. A
MORE COMPLETE DISCLOSURE WILL BE PROVIDED TO A PHYSICIAN IN THE EVENT
OF A MEDICAL EMERGENCY.

All components of this product are listed on the TSCA registry.

SECTION III - PHYSICAL/CHEMICAL CHARACTERISTICS

BOILING RANGE: Not applicable VAPOR DENSITY: Exceeds 1.0

SPECIFIC GRAVITY (H20=1.0): 0.935 VAPOR PRESSURE: Not applicable

PERCENT VOLATILE BY VOLUME: 0% SOLUBILITY IN WATER: Miscible

EVAPORATION RATE: Not applicable
APPEARANCE AND ODOR: Amber liquid - only a faint odor.
WEIGHT PER GALLON: 7.76 lbs. at 60 F.




1 of 3
SECTION IV - FIRE AND EXPLOSION DATA

FLAMMABILITY CLASSIFICATION: Combustible Liquid - Class IIIB.
FLASH POINT: Not determined
EXTINGUISHING MEDIA: CO2, dry chemical, sand.
SPECIAL FIREFIGHTING PROCEDURES: Avoid use of water as it may spread fire by dispersing
oil. Use water to keep fire-exposed containers cool.


SECTION V - REACTTVITY DATA

INCOMPATABILITY (MATERIALS TO AVOID): None

HAZARDOUS DECOMPOSITIONS OR BY-PRODUCTS: None

HAZARDOUS POLYMERIZATION: Will not occur.


SECTION VI - HEALTH HAZARD DATA

THRESHHOLD LIMIT VALUE: As a liquid - none. As an oil mist 10 mg/m3 total particulate.

INHALATION HEALTH RISKS AND SYMPTOMS OF EXPOSURE: Excessive inhalation of oil
mist may affect the respiratory system. Oil mist is classified as a nuisance particulate by ACGIH.

SKIN ABSORPTION HEALTH RISKS AND SYMPTOMS OF EXPOSURE: Sensitive individuals
may experience dermatitis after long exposure of oil on skin.

HEALTH HAZARDS (ACUTE AND CHRONIC): Acute: none observed by inhalation. Chronic: none
reported.

EMERGENCY AND FIRST AID PROCEDURES FOR:

-- SKIN CONTACT: May be removed from skin by washing with soap and warm water.

-- INHALATION: Expose individual to fresh air source.

SECTION VII - PRECAUTIONS FOR SAFE HANDLING AND USE

STEPS TO BE TAKEN IN CASE MATERIAL IS RELEASED OR SPILLED: Depending on
quantity of spill: (a) Small spill - add solid adsorbent, shovel into disposable container and hose down
area. Clean area with detergent. (b) Large spill - Squeegee or pump into holding container. Clean area
with detergent.

WASTE DISPOSAL METHOD: Dispose of in accordance with local, state, and federal regulations.

HANDLING AND STORAGE: Can be stored in most common storage vessels including carbon steel,
aluminum, fiberglass, and stainless steel.

2 of 3
SECTION VIII - CONTROL MEASURES

RESPIRATORY PROTECTION: Not normally needed.

VENTILATION: Intermittent clean air exchanges recommended, but not required.

PROTECTIVE GLOVES: Not normally needed.

EYE PROTECTION: Eye protection is always recommended when handling chemicals.


SECTION IX - SPECIAL PRECAUTIONS

PRECAUTIONS TO BE TAKEN IN HANDLING AND STORING: Store away from flame and fire,
AND excessive heat.


SECTION X - DISCLAIMER AND/OR COMMENTS

We recommend that containers be either professionally reconditioned for re-use by certified firms or
properly disposed of by certified firms to help reduce the possibility of an accident. Disposal of
containers should be in accordance with applicable federal, state and local laws and regulations. "Empty"
drums should not be given to individuals.

The information in this MSDS was obtained from sources we believe are reliable. However, the
information is provided without any representation or-warranty, expressed or implied, regarding its
accuracy or correctness.

The conditions of handling, storage, use and disposal of the product are beyond our control and may be
beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly
disclaim liability for loss, damage or expense arising out of or in any way connected with the handling,
storage, use or disposal of the product.




3 of 3

Search    ENTER KEYWORD
ALL Chemical Property And Toxicity Analysis PAGES IN THIS GROUP
NAMECAS
elcolabs_com---ggc-msds.asp 6834-92-0
elmusa_com---coolway_46_msds.asp 8001-22-7
elmusa_com---coolway_68_msds.asp 8001-22-7
elmusa_com---elm_concrete_asphalt_form_release_msds.asp 8001-22-7
elmusa_com---elm_cotton_picker_spindle_grease_msds.asp 8001-22-7
elmusa_com---elm_dust_suppressant_msds.asp 56-81-5
elmusa_com---envirolift_elevator_hydraulic_oil_msds.asp 8001-22-7
elmusa_com---s-206_alkaline_machine_cleaner.asp 5989-27-5 68424-85-1 1800-72-7 57-55-6 70592-80-2
elmusa_com---soyeasy_cool_xxl_msds.asp 8001-22-7
elmusa_com---soyeasy_cool_xxl_plus_msds.asp 8001-22-7
elmusa_com---soyeasy_draw_msds.asp 8001-22-7
elmusa_com---soyeasy_form_hm_msds.asp N/A
elmusa_com---soyeasy_form_r40_msds.asp 8001-22-7
elmusa_com---soyeasy_nu-cut_ultra_lite_msds.asp 8001-22-7
elmusa_com---soyeasy_nucut_lite_msds.asp 8001-22-7
elmusa_com---soyeasy_nucut_plus_msds.asp 8001-22-7
elmusa_com---soyeasy_ogl.asp 8001-22-7
elmusa_com---soyeasy_quench.asp 8001-22-7
elmusa_com---soyeasy_threadz_msds.asp 8001-22-7
elmusa_com---soyfluid_hydraulic_all_season_iso32_msds.asp 8001-22-7
elmusa_com---soyfluid_hydraulic_food_grade_iso46_msds.asp 8001-22-7
elmusa_com---soyfluid_hydraulic_industrial_iso46_msds.asp 8001-22-7
elmusa_com---soyfluid_hydraulic_universal_tractor_msds.asp 8001-22-7
elmusa_com---soygrease_ep_premium_msds.asp 8001-22-7
elmusa_com---soygrease_fifthwheel_msds.asp 8001-22-7
elmusa_com---soygrease_food_machinery_nlgi_1_2.asp N/A
elmusa_com---tempflex0_100msds.asp 8001-22-7 7782-42-5 1317-33-5
elmusa_com---tempflex35_160mos2_msds.asp 8001-22-7 7782-42-5 1317-33-5
ems-secure_com---10350.asp N/A
ems-secure_com---11900.asp N/A
ems-secure_com---12350.asp N/A
ems-secure_com---13450.asp 1321-74-0
ems-secure_com---19152.asp N/A
enersysinc_com---msds_prowash_2.asp N/A
enersysinc_com---msds_prowash_clear.asp N/A
enersysinc_com---msds_prowash_plus.asp N/A
essentialrmd_com---cc4520.asp 7732-18-5 872-50-4
essentialrmd_com---cc4560.asp 7732-18-5
essentialrmd_com---r4100.asp 7732-18-5 872-50-4
essentialrmd_com---r4105.asp 7732-18-5 872-50-4
essentialrmd_com---r4115.asp 7732-18-5 872-50-4
essentialrmd_com---r4150.asp 7732-18-5 872-50-4
essentialrmd_com---r4188.asp 7732-18-5 872-50-4
essentialrmd_com---r4196.asp 7732-18-5 872-50-4
essentialrmd_com---r4231.asp 7732-18-5 111109-77-4
essentialrmd_com---r4289.asp 7732-18-5
essentialrmd_com---r4310.asp 7732-18-5
essentialrmd_com---r4370.asp 7732-18-5
essentialrmd_com---r4388.asp 7732-18-5
essentialrmd_com---r5800.asp 7732-18-5

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com | Ads link:HBCCHEM.INC