Search    
MSDS
: 
 1-Butylpyridinium chloroaluminate(III)-(kit containing 10g:20g of
CAS
: 
 0-01-1
SYNONYMS
:
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| Not available |1-Butylpyridinium chloroaluminate(III)| | unlisted |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: C
Risk Phrases: 34

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Causes burns.Hygroscopic (absorbs moisture from the air).

Potential Health Effects
Eye:
Causes eye burns.
Skin:
Causes skin burns.
Ingestion:
Causes gastrointestinal tract burns.
Inhalation:
Causes chemical burns to the respiratory tract. Inhalation may be
fatal as a result of spasm, inflammation, edema of the larynx and
bronchi, chemical pneumonitis and pulmonary edema. May cause burning
sensation, coughing, wheezing, laryngitis, shortness of breath,
headache, nausea, and vomiting.
Chronic:
Not available.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid
immediately.
Skin:
Get medical aid immediately. Immediately flush skin with plenty of
water for at least 15 minutes while removing contaminated clothing
and shoes.
Ingestion:
Get medical aid immediately. Do NOT induce vomiting. If conscious
and alert, rinse mouth and drink 2-4 cupfuls of milk or water.
Inhalation:
Get medical aid immediately. Remove from exposure and move to fresh
air immediately. If not breathing, give artificial respiration. If
breathing is difficult, give oxygen.
Notes to Physician:
Treat symptomatically and supportively.

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear.
Extinguishing Media:
Use water spray, dry chemical, carbon dioxide, or chemical foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Avoid runoff into storm sewers and
ditches which lead to waterways.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Do not breathe dust, vapor, mist, or gas. Do not get in eyes, on
skin, or on clothing. Use only in a chemical fume hood.
Storage:
Store in a cool, dry place. Store in a tightly closed container.
Corrosives area.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 0-01-1:


Personal Protective Equipment

Eyes:
Not available.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Liquid
Color: Not available.
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: Not available.
Autoignition Temperature: Not available.
Flash Point: Not available.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density: Not available.
Molecular Formula: C10H18NCl/3AlCl3
Molecular Weight:

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Exposure to moist air or water.
Incompatibilities with Other Materials:
Not available.
Hazardous Decomposition Products:
Hydrogen chloride, carbon monoxide, carbon dioxide.
Hazardous Polymerization: Has not been reported

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 0-01-1 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
1-Butylpyridinium chloroaluminate(III) -
Not listed by ACGIH, IARC, or NTP.

**** SECTION 12 - ECOLOGICAL INFORMATION ****

Other
No information available.

**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: CORROSIVE LIQUID, N.O.S.*
Hazard Class: 8
UN Number: 1760
Packing Group: III
IMO
Shipping Name: CORROSIVE LIQUID, N.O.S.
Hazard Class: 8
UN Number: 1760
Packing Group: III
RID/ADR
No information available.

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: C
Risk Phrases:
R 34 Causes burns.
Safety Phrases:
S 26 In case of contact with eyes, rinse immediately
with plenty of water and seek medical advice.
S 36/37/39 Wear suitable protective clothing, gloves
and eye/face protection.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 0-01-1: No information available.
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 0-01-1 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 0-01-1 is not listed on the TSCA inventory.
It is for research and development use only.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 1/16/2002 Revision #1 Date: 10/05/2004

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
3,3'-Dimethyl-2,2'-bithiophenyl 67984-20-7
3-Methylbenzofuran 21535-97-7
5-Acetyl-2,2'-Bithienyl 3515-18-2
10-Chloro-9-cyanoanthracene 1213-82-7
2,2'-Bithienyl-5-carboxaldehyde 3779-27-9
N,N-Bis(2,5-dihydroxybenzylidene)ethylenediamine 124061-43-4
N,N-Bis(2,5-dihydroxybenzylidene)-1,2-diaminobenzene 154198-33-1
Calcium Hydride 7789-78-8
3,4-Diaminofurazan 17220-38-1
Diaminoglyoxime 2580-79-2
1,2-Bis(3-methylthiophen-2-yl)ethane-1,2-dione 147951-24-4
5,5'-Dimethyl-2,2'-bithiophene 16303-58-5
3,3'-Dimethyl-2,2'-bithiophene-5-carboxaldehyde 0-01-1
2-Amino-2-phenylbutyric acid 5438-07-3
2-Amino-3-phenyl-2-propenoic acid 7060-39-1
1-Butylpyridinium chloroaluminate(III)-(kit containing 10g:20g of 0-01-1
1-Dodecyl-3-methylimidazolium chloride 114569-84-5
Calcium Hydroxide 1305-62-0
1-Tetradecyl-3-Methylimidazolium Chloride 171058-21-2
1-Hexadecyl-3-Methylimidazolium Chloride 61546-01-8
1-Octadecyl-3-Methylimidazolium Chloride 171058-19-8
1-Ethyl-3-Methylimidazolium Bromide 65039-08-9
1-Butyl-3-Methylimidazolium Bromide 85100-77-2
1-Hexyl-3-Methylimidazolium Bromide 85100-78-3
Molybdenum atomic absorption standard solution, 1 mg/ml Mo in 2% HNO3 7439-98-7
1-Ethylpyridinium Bromide 1906-79-2
L-Cycloserine, 99% 339-72-0
Calcium hypochlorite, available chlorine >65% 7778-54-3
1-Methyl-3-phenylpiperazine, 99% 5271-27-2
4-(Aminomethyl)Benzoic Acid Hydrate 56-91-7
Ethyl 5-Nitrobenzofuran-2-Carboxylate, 97% 69604-00-8
3-Benzyloxybenzaldehyde Resin 0-01-1
Calcium L-lactate pentahydrate 5743-47-5
Indole resin, 1% DVB; 0.7-1.4 mmol/g; 100-200 mesh 0-01-1
REM resin, 1% DVB; 0.6-1.0 mmol/g; 100-200 mesh 0-01-1
Vinyl Sulfone polystyrene resin, 1% DVB; 0.4-1.2 mmol/g; 100-200 mesh 0-01-1
Benzhydrylamine resin (HCl salt), 1% DVB; 1.5-2.0 mmol/g; 100-200 0-01-1
Glycerol resin, 1% dvb; 100-200 mesh; 0.6-1 mmol/g 0-01-1
Rink amide 4-methylbenzhydrylamine polymer resin, 1% DVB; 0.7-1.1 0-01-1
Polystyrene CH2PPh3+Cl-, 1% DVB; 100-200 mesh; 0.7-1.3 mmol/g 0-01-1
Triphenylphosphine resin, 1% DVB; 100-200 mesh; 1-1.5 mmol/g 0-01-1
Piperidinomethyl polystyrene resin, 1% DVB; 100-200 mesh; 2-3 mmol/g 0-01-1
Sulfonyl Chloride Polystyrene Resin, 1% DVB; 100-200 mesh; 1-2 mmol/g 0-01-1
Poly-DMAP Resin, 1% DVB; 100-200 Mesh; 0.9-2 mmol/g 0-01-1
Morpholinomethyl polystyrene resin, 1% DVB; 100-200 mesh; 2-3.5 0-01-1
Tris(2-aminoethyl)amine resin, 1% DVB; 100-200 mesh; 0.6-1 mmol/g 0-01-1
S-(Methyl)thiomethyl polystyrene resin, 1% DVB; 100-200 mesh; 0.5-1.3 0-01-1
Diisopropylaminomethylpolystyrene resin, 1% DVB; 100-200 mesh; 2-3.7 0-01-1
Methylisocyanate resin 0-01-1
p-Toluenesulfonyl chloride resin 0-01-1

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net