Search    
MSDS
: 
 Polystyrene CH2PPh3+Cl-, 1% DVB; 100-200 mesh; 0.7-1.3 mmol/g
CAS
: 
 0-01-1
SYNONYMS
:
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| Not available |Polystyrene CH2PPh3+Cl- | | unlisted |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: None Listed.
Risk Phrases: None Listed.

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Not available.

Potential Health Effects
Eye:
May cause eye irritation.
Skin:
May cause skin irritation. May be harmful if absorbed through the
skin.
Ingestion:
May cause irritation of the digestive tract. May be harmful if
swallowed.
Inhalation:
May cause respiratory tract irritation. May be harmful if inhaled.
Chronic:
Not available.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes.
Ingestion:
Get medical aid. Wash mouth out with water.
Inhalation:
Remove from exposure and move to fresh air immediately.
Notes to Physician:
Treat symptomatically and supportively.

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear.
Extinguishing Media:
Use water spray, dry chemical, carbon dioxide, or chemical foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Vacuum or sweep up material and place into a suitable disposal
container.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Avoid breathing dust, vapor, mist, or gas. Avoid contact with skin
and eyes.
Storage:
Store in a cool, dry place. Store in a tightly closed container.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Use adequate ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 0-01-1:


Personal Protective Equipment

Eyes:
Not available.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Solid
Color: off-white - light yellow
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: Not available.
Autoignition Temperature: Not available.
Flash Point: Not available.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density:
Molecular Formula:
Molecular Weight:

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Not available.
Conditions to Avoid:
Incompatible materials.
Incompatibilities with Other Materials:
Strong oxidizing agents.
Hazardous Decomposition Products:
Hydrogen chloride, nitrogen oxides, carbon monoxide, oxides of
phosphorus, carbon dioxide.
Hazardous Polymerization: Has not been reported

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 0-01-1 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
Polystyrene CH2PPh3+Cl- -
Not listed by ACGIH, IARC, or NTP.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
No information available.
IMO
No information available.
RID/ADR
No information available.

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: Not available.
Risk Phrases:
Safety Phrases:
S 24/25 Avoid contact with skin and eyes.
WGK (Water Danger/Protection)
CAS# 0-01-1: No information available.
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 0-01-1 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 0-01-1 is not listed on the TSCA inventory.
It is for research and development use only.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 1/16/2002 Revision #1 Date: 10/05/2004

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
3,3'-Dimethyl-2,2'-bithiophenyl 67984-20-7
3-Methylbenzofuran 21535-97-7
5-Acetyl-2,2'-Bithienyl 3515-18-2
10-Chloro-9-cyanoanthracene 1213-82-7
2,2'-Bithienyl-5-carboxaldehyde 3779-27-9
N,N-Bis(2,5-dihydroxybenzylidene)ethylenediamine 124061-43-4
N,N-Bis(2,5-dihydroxybenzylidene)-1,2-diaminobenzene 154198-33-1
Calcium Hydride 7789-78-8
3,4-Diaminofurazan 17220-38-1
Diaminoglyoxime 2580-79-2
1,2-Bis(3-methylthiophen-2-yl)ethane-1,2-dione 147951-24-4
5,5'-Dimethyl-2,2'-bithiophene 16303-58-5
3,3'-Dimethyl-2,2'-bithiophene-5-carboxaldehyde 0-01-1
2-Amino-2-phenylbutyric acid 5438-07-3
2-Amino-3-phenyl-2-propenoic acid 7060-39-1
1-Butylpyridinium chloroaluminate(III)-(kit containing 10g:20g of 0-01-1
1-Dodecyl-3-methylimidazolium chloride 114569-84-5
Calcium Hydroxide 1305-62-0
1-Tetradecyl-3-Methylimidazolium Chloride 171058-21-2
1-Hexadecyl-3-Methylimidazolium Chloride 61546-01-8
1-Octadecyl-3-Methylimidazolium Chloride 171058-19-8
1-Ethyl-3-Methylimidazolium Bromide 65039-08-9
1-Butyl-3-Methylimidazolium Bromide 85100-77-2
1-Hexyl-3-Methylimidazolium Bromide 85100-78-3
Molybdenum atomic absorption standard solution, 1 mg/ml Mo in 2% HNO3 7439-98-7
1-Ethylpyridinium Bromide 1906-79-2
L-Cycloserine, 99% 339-72-0
Calcium hypochlorite, available chlorine >65% 7778-54-3
1-Methyl-3-phenylpiperazine, 99% 5271-27-2
4-(Aminomethyl)Benzoic Acid Hydrate 56-91-7
Ethyl 5-Nitrobenzofuran-2-Carboxylate, 97% 69604-00-8
3-Benzyloxybenzaldehyde Resin 0-01-1
Calcium L-lactate pentahydrate 5743-47-5
Indole resin, 1% DVB; 0.7-1.4 mmol/g; 100-200 mesh 0-01-1
REM resin, 1% DVB; 0.6-1.0 mmol/g; 100-200 mesh 0-01-1
Vinyl Sulfone polystyrene resin, 1% DVB; 0.4-1.2 mmol/g; 100-200 mesh 0-01-1
Benzhydrylamine resin (HCl salt), 1% DVB; 1.5-2.0 mmol/g; 100-200 0-01-1
Glycerol resin, 1% dvb; 100-200 mesh; 0.6-1 mmol/g 0-01-1
Rink amide 4-methylbenzhydrylamine polymer resin, 1% DVB; 0.7-1.1 0-01-1
Polystyrene CH2PPh3+Cl-, 1% DVB; 100-200 mesh; 0.7-1.3 mmol/g 0-01-1
Triphenylphosphine resin, 1% DVB; 100-200 mesh; 1-1.5 mmol/g 0-01-1
Piperidinomethyl polystyrene resin, 1% DVB; 100-200 mesh; 2-3 mmol/g 0-01-1
Sulfonyl Chloride Polystyrene Resin, 1% DVB; 100-200 mesh; 1-2 mmol/g 0-01-1
Poly-DMAP Resin, 1% DVB; 100-200 Mesh; 0.9-2 mmol/g 0-01-1
Morpholinomethyl polystyrene resin, 1% DVB; 100-200 mesh; 2-3.5 0-01-1
Tris(2-aminoethyl)amine resin, 1% DVB; 100-200 mesh; 0.6-1 mmol/g 0-01-1
S-(Methyl)thiomethyl polystyrene resin, 1% DVB; 100-200 mesh; 0.5-1.3 0-01-1
Diisopropylaminomethylpolystyrene resin, 1% DVB; 100-200 mesh; 2-3.7 0-01-1
Methylisocyanate resin 0-01-1
p-Toluenesulfonyl chloride resin 0-01-1

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net