Search   
MSDS 
:
 Lithium tri-tert-butoxyaluminohydride, 1.1M solution in THF
CAS 
:
 109-99-9
SYNONYMS 
:
 None Known.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
|----------------|--------------------------------------|----------|-----------|
| 109-99-9 |Tetrahydrofuran | 70 | 203-726-8 |
|----------------|--------------------------------------|----------|-----------|
| 17476-04-9 |Lithium aluminum tri-tert-butoxy-hydri| 30 | 241-490-8 |
+----------------+--------------------------------------+----------+-----------+
Text for R-phrases: see Section 16
Hazard Symbols: F C
Risk Phrases: 11 14/15 19 35

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Highly flammable. Reacts violently with water liberating extremely
flammable gases. May form explosive peroxides. Causes severe
burns.Water-reactive.

Potential Health Effects
Eye:
Causes eye burns.
Skin:
Causes skin burns. May be absorbed through the skin.
Ingestion:
Causes gastrointestinal tract burns. May cause central nervous
system depression. May be harmful if swallowed.
Inhalation:
Inhalation of high concentrations may cause central nervous system
effects characterized by nausea, headache, dizziness, unconsciousness
and coma. Causes chemical burns to the respiratory tract. Vapors may
cause dizziness or suffocation. Inhalation may cause coughing,
difficulty breathing and loss of consciousness.
Chronic:
Prolonged or repeated eye contact may cause conjunctivitis.
Prolonged or repeated skin contact may cause defatting and
dermatitis. May cause liver and kidney damage. May cause lung damage.
Narcotic in high concentrations.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid
immediately. Do NOT allow victim to rub eyes or keep eyes closed.
Skin:
Get medical aid immediately. Immediately flush skin with plenty of
water for at least 15 minutes while removing contaminated clothing
and shoes.
Ingestion:
Do not induce vomiting. If victim is conscious and alert, give 2-4
cupfuls of milk or water. Get medical aid immediately.
Inhalation:
Get medical aid immediately. Remove from exposure and move to fresh
air immediately. If breathing is difficult, give oxygen. Do NOT use
mouth-to-mouth resuscitation. If breathing has ceased apply
artificial respiration using oxygen and a suitable mechanical device
such as a bag and a mask.
Notes to Physician:
Treat symptomatically and supportively. Persons with skin problems
or liver, kidney, lung, or blood diseases may be at increased risk
from exposure to this substance.

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. Will burn if involved in a fire. Water Reactive.
Material will react with water and may release a flammable and/or
toxic gas. Use water spray to keep fire-exposed containers cool.
Forms peroxides of unknown stability. Flammable liquid and vapor. May
form explosive peroxides. Extremely flammable liquid and vapor. Vapor
may cause flash fire. Vapors are heavier than air and may travel to a
source of ignition and flash back. Vapors can spread along the ground
and collect in low or confined areas.
Extinguishing Media:
Use approved class D extinguishing agents or smother with dry sand,
clay, or sodium bicarbonate. Do NOT use water, carbon dioxide, or
foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Use water spray to dilute spill to
a non-flammable mixture. Avoid runoff into storm sewers and ditches
which lead to waterways. Remove all sources of ignition. Use a
spark-proof tool. Isolate area and deny entry. Provide ventilation.
Do not expose spill to water. A vapor suppressing foam may be used
to reduce vapors.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Do not allow water to get into the container because of violent
reaction. Ground and bond containers when transferring material. Use
spark-proof tools and explosion proof equipment. Do not breathe dust,
vapor, mist, or gas. Do not get in eyes, on skin, or on clothing.
Empty containers retain product residue, (liquid and/or vapor), and
can be dangerous. Take precautionary measures against static
discharges. Keep container tightly closed. Do not allow contact with
water. Use only in a chemical fume hood. Do not pressurize, cut,
weld, braze, solder, drill, grind, or expose empty containers to
heat, sparks or open flames. Keep away from heat, sparks and flame.
Storage:
Keep away from sources of ignition. Store in a cool, dry place.
Store in a tightly closed container. Flammables-area. Corrosives
area. Water free area. Regularly check inhibitor levels to maintain
peroxide levels below 1%. Store under nitrogen. Containers should be
dated when opened and tested periodically for the presence of
peroxides. Should crystals form in a peroxidizable liquid,
peroxidation may have occurred and the product should be considered
extremely dangerous. In this instance, the container should only be
opened remotely by professionals. All peroxidizable substances should
be stored away from heat and light and be protected from ignition
sources.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate general or
local explosion-proof ventilation to keep airborne levels to
acceptable levels.
Exposure Limits
CAS# 109-99-9:
United Kingdom, WEL - TWA: 50 ppm TWA; 150 mg/m3 TWA
United Kingdom, WEL - STEL: 100 ppm STEL; 300 mg/m3 STEL
United States OSHA: 200 ppm TWA; 590 mg/m3 TWA
Belgium - TWA: 200 ppm VLE; 599 mg/m3 VLE
Belgium - STEL: 100 ppm VLE; 300 mg/m3 VLE
France - VME: 200 ppm VME; 590 mg/m3 VME
Germany: 50 ppm TWA; 150 mg/m3 TWA
Germany: Skin absorber
Japan: 200 ppm OEL; 590 mg/m3 OEL
Malaysia: 200 ppm TWA; 590 mg/m3 TWA
Netherlands: 100 ppm MAC; 300 mg/m3 MAC
Russia: 100 mg/m3 TWA
Spain: 50 ppm VLA-ED; 150 mg/m3 VLA-ED
Spain: 100 ppm VLA-EC; 300 mg/m3 VLA-EC
CAS# 17476-04-9:


Personal Protective Equipment

Eyes:
Wear chemical splash goggles.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
A respiratory protection program that meets OSHA's 29
CFR 1910.134 and ANSI Z88.2 requirements or European
Standard EN 149 must be followed whenever workplace
conditions warrant respirator use. Follow the OSHA
respirator regulations found in 29 CFR 1910.134 or
European Standard EN 149. Use a NIOSH/MSHA or
European Standard EN 149 approved respirator if
exposure limits are exceeded or if irritation or
other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Liquid
Color: grey
Odor: solvent odor
pH: >7
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: Not available.
Autoignition Temperature: Not available.
Flash Point: -17 deg C ( 1.40 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water: vigorous reaction
Specific Gravity/Density: 0.900
Molecular Formula: C12H28AlLiO3
Molecular Weight: 254.28

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Air sensitive. Reacts violently with water. Moisture sensitive.
Light sensitive. Under normal storage conditions, peroxidizable
compounds can form and accumulate peroxides which may explode when
subjected to heat or shock. This material is most hazardous when
peroxide levels are concentrated by distillation or evaporation. THF
should never be distilled to dryness. Prolonged exposure to air, even
from extended storage time, can deplete BHT inhibitor and rapidly
accelerate THF-peroxide formation.
Conditions to Avoid:
Ignition sources, exposure to air, excess heat, exposure to moist air
or water, evaporating to near dryness, confined spaces, direct
sunlight..
Incompatibilities with Other Materials:
Sodium aluminum hydride, sodium tetrahydroaluminate, lithium
tetrahydroaluminate, borane, metal halides, strong oxidizing agents,
strong acids, oxygen, caustic alkalis, bromine.
Hazardous Decomposition Products:
Carbon monoxide, carbon dioxide, aluminum oxide, aluminum fumes,
oxides of lithium.
Hazardous Polymerization: Has not been reported

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 109-99-9: LU5950000
CAS# 17476-04-9: OJ5585000
LD50/LC50:
CAS# 109-99-9: Inhalation, rat: LC50 = 21000 ppm/3H; Oral, rat: LD50
= 1650 mg/kg.
CAS# 17476-04-9.
Carcinogenicity:
Tetrahydrofuran -
ACGIH: A3 - Confirmed animal carcinogen with unknown relevance to
Lithium aluminum tri-tert-butoxy-hydride -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****

Ecotoxicity:
Fish: Fathead Minnow: LC50 = 2160 mg/L; 96 Hr; Flow through bioassay
(pH 7.5)Water flea Daphnia: EC50 =5930 mg/L; 24 HrTetrahydrofuran is
not expected to adsorb to suspended matter in the water based on its
measured Koc values. This compound should volatilize from water
surfaces. An estimated BCF value of 1 suggests that tetrahydrofuran
will not bioconcentrate in aquatic organisms.

**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: ORGANOMETALLIC COMPOUND DISPERSION, WATER-REACTIVE
, FLAMMABLE, N.O.S.* (forbidden to ship via cargo)
Hazard Class: 4.3 (3)
UN Number: 3207
Packing Group: I
IMO
Shipping Name: ORGANOMETALLIC COMPOUND DISPERSION, WATER-REACTIVE
, FLAMMABLE, N.O.S.
Hazard Class: 4.3 (3)
UN Number: 3207
Packing Group: I
RID/ADR
Shipping Name: ORGANOMETALLIC COMPOUND DISPERSION, WATER-REACTIVE
, FLAMMABLE, N.O.S.
Hazard Class: 4.3 (3)
UN Number: 3207
Packing group: I
USA RQ: CAS# 109-99-9: 1000 lb final RQ; 454 kg final RQ

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: F C
Risk Phrases:
R 11 Highly flammable.
R 14/15 Reacts violently with water liberating
extremely flammable gases.
R 19 May form explosive peroxides.
R 35 Causes severe burns.
Safety Phrases:
S 6A Keep under nitrogen.
S 16 Keep away from sources of ignition - No
smoking.
S 26 In case of contact with eyes, rinse immediately
with plenty of water and seek medical advice.
S 36/37/39 Wear suitable protective clothing, gloves
and eye/face protection.
S 43B In case of fire, use fire-fighting equipment
on basis of sodium chloride, sodium bicarbonate (never
use water).
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 109-99-9: 1
CAS# 17476-04-9: No information available.
Canada
CAS# 109-99-9 is listed on Canada's DSL List.
CAS# 17476-04-9 is listed on Canada's NDSL List.
CAS# 109-99-9 is listed on Canada's Ingredient Disclosure List.
CAS# 17476-04-9 is listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 109-99-9 is listed on the TSCA inventory.
CAS# 17476-04-9 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

Text for R-phrases from Section 2
R 11 Highly flammable.
R 19 May form explosive peroxides.
R 36/37 Irritating to eyes and respiratory system.
MSDS Creation Date: 9/20/2004 Revision #1 Date: 12/28/2004

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
5,5-Dimethyl-2-butanal-1,3-dioxane 127600-13-9
4,5-Dihydroxy-4-cyclopentene-1,2,3-trione, 97% 488-86-8
Benzhydrol, 99% 91-01-0
2-Amino-5-iodopyrimidine, 97% 1445-39-2
2-(1-Pyrrolidino)phenol, 98% 4787-77-3
Isoamyl nitrite, 97%, stabilized with 0.2% anhydrous sodium carbonate 110-46-3
1-(2-Hydroxyethyl)imidazole, 95% 1615-14-1
Dimethyl aminomalonate hydrochloride, 97% 16115-80-3
7-Bromonorbornane 13237-88-2
syn-7-Bromonorbornene 20047-65-8
Chromone, 99% 491-38-3
1-(2,6-Dimethylphenoxy)-2-propanamine hydrochloride 5370-01-4
1-Ethylguanidine hemisulfate 3482-86-8
2H-1,4-Benzoxazin-3(4H)-one 5466-88-6
6-Methylchromone hydrate 314041-54-8
4-Hydroxy-6,7-dimethylcoumarin 314041-52-6
4-Hydroxy-6-methylcoumarin 13252-83-0
6-Chloroflavone 10420-73-2
6-Chloro-7-methylflavone 147919-60-6
d-(+)-Proline, 99+% 344-25-2
6-Chloro-4-hydroxycoumarin 19484-57-2
6-Bromochromone 51483-92-2
N,N-Dimethylbenzylamine, 99% 103-83-3
Phenylphosphinic acid, 97% (Titr.) 1779-48-2
3-Cyanochromone 50743-17-4
3-Cyano-4-methylcoumarin 24526-69-0
6-Chloro-3-formylchromone 42248-31-7
6,8-Dichloro-3-formylchromone 64481-10-3
6-Methylchromone-2-carboxylic acid 5006-44-0
Lead(II) chloride 7758-95-4
4-Hydroxybutyl vinyl ether, stabilized, 99% 17832-28-9
trans-3-Ethoxyacrylonitrile, 98% 58243-08-6
n-(Hydroxymethyl)phthalimide, 97% 118-29-6
3-(Trifluoromethyl)phenylhydrazine hydrochloride 3107-33-3
Diisobutylaluminium hydride, 1.1M solution in cyclohexane 110-82-7
Iron(III) ammonium citrate 1185-57-5
Tri-n-octylaluminium, 0.3M solution in heptane 142-82-5
Lithium tri-tert-butoxyaluminohydride, 1.1M solution in THF 109-99-9
Indole-4-carboxaldehyde 1074-86-8
(4-Methoxyphenyl)phenyliodonium triflate 115298-63-0
Bis(4-tert-butylphenyl)iodonium triflate 84563-54-2
2,3-Dibromo-3-phenylpropiophenone, 98% 611-91-6
(2e,5e)-2,5-bis[(4-(diethylamino)phenyl)methylene]cyclopentanone 261360-66-1
Tris(2-methyl-4-diethylaminophenyl)methane 4482-70-6
2-Nitrophenylarsonic acid 5410-29-7
4-Phenoxyphenyl isocyanate, 98% 59377-19-4
Iron (III) Ammonium Sulfate Dodecahydrate 7783-83-7
2,6-Dimethylphenyl isothiocyanate, 98% 19241-16-8
Iron (II) Ammonium Sulfate Hexahydrate 7783-85-9
3-Methoxyphenyl isothiocyanate, 98% 3125-64-2

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net