Search   
MSDS 
:
 3-Methoxyphenyl isothiocyanate, 98%
CAS 
:
 3125-64-2
SYNONYMS 
:
 
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 3125-64-2 |3-Methoxyphenyl isothiocyanate | 98% | unlisted |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: C
Risk Phrases: 20/21/22 34

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Harmful by inhalation, in contact with skin and if swallowed. Causes
burns.

Potential Health Effects
Eye:
Causes eye burns. Lachrymator (substance which increases the flow
of tears).
Skin:
Causes skin burns.
Ingestion:
Causes gastrointestinal tract burns.
Inhalation:
Causes chemical burns to the respiratory tract.
Chronic:
Not available.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid
immediately.
Skin:
Get medical aid immediately. Immediately flush skin with plenty of
water for at least 15 minutes while removing contaminated clothing
and shoes.
Ingestion:
Do not induce vomiting. Get medical aid immediately.
Inhalation:
Get medical aid immediately. Remove from exposure and move to fresh
air immediately. If not breathing, give artificial respiration. If
breathing is difficult, give oxygen.
Notes to Physician:
Treat symptomatically and supportively.

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear.
Extinguishing Media:
Use foam, dry chemical, or carbon dioxide.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Do not breathe dust, vapor, mist, or gas. Do not get in eyes, on
skin, or on clothing. Use only in a chemical fume hood.
Storage:
Store in a cool, dry place. Store in a tightly closed container.
Corrosives area.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 3125-64-2:


Personal Protective Equipment

Eyes:
Not available.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Liquid
Color: clear light yellow
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 129 deg C @11mmHg
Freezing/Melting Point: Not available.
Autoignition Temperature: Not available.
Flash Point: 110 deg C ( 230.00 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density: 1.179
Molecular Formula: C8H7NOS
Molecular Weight: 165.22

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Moisture sensitive.
Conditions to Avoid:
Incompatible materials, exposure to moist air or water.
Incompatibilities with Other Materials:
Strong oxidizing agents.
Hazardous Decomposition Products:
Hydrogen cyanide, nitrogen oxides, carbon monoxide, carbon dioxide,
sulfur oxides (SOx), including sulfur oxide and sulfur dioxide.
Hazardous Polymerization: Has not been reported

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 3125-64-2 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
3-Methoxyphenyl isothiocyanate -
Not listed by ACGIH, IARC, or NTP.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: CORROSIVE LIQUID, TOXIC, N.O.S.*
Hazard Class: 8 (6.1)
UN Number: 2922
Packing Group: III
IMO
Shipping Name: CORROSIVE LIQUID, TOXIC, N.O.S.
Hazard Class: 8 (6.1)
UN Number: 2922
Packing Group: III
RID/ADR
Shipping Name: CORROSIVE LIQUID, TOXIC, N.O.S.
Hazard Class: 8 (6.1)
UN Number: 2922
Packing group: III

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: C
Risk Phrases:
R 20/21/22 Harmful by inhalation, in contact with
skin and if swallowed.
R 34 Causes burns.
Safety Phrases:
S 26 In case of contact with eyes, rinse immediately
with plenty of water and seek medical advice.
S 36/37/39 Wear suitable protective clothing, gloves
and eye/face protection.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 3125-64-2: No information available.
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 3125-64-2 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 3125-64-2 is not listed on the TSCA inventory.
It is for research and development use only.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 9/20/2004 Revision #0 Date: Original.

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
5,5-Dimethyl-2-butanal-1,3-dioxane 127600-13-9
4,5-Dihydroxy-4-cyclopentene-1,2,3-trione, 97% 488-86-8
Benzhydrol, 99% 91-01-0
2-Amino-5-iodopyrimidine, 97% 1445-39-2
2-(1-Pyrrolidino)phenol, 98% 4787-77-3
Isoamyl nitrite, 97%, stabilized with 0.2% anhydrous sodium carbonate 110-46-3
1-(2-Hydroxyethyl)imidazole, 95% 1615-14-1
Dimethyl aminomalonate hydrochloride, 97% 16115-80-3
7-Bromonorbornane 13237-88-2
syn-7-Bromonorbornene 20047-65-8
Chromone, 99% 491-38-3
1-(2,6-Dimethylphenoxy)-2-propanamine hydrochloride 5370-01-4
1-Ethylguanidine hemisulfate 3482-86-8
2H-1,4-Benzoxazin-3(4H)-one 5466-88-6
6-Methylchromone hydrate 314041-54-8
4-Hydroxy-6,7-dimethylcoumarin 314041-52-6
4-Hydroxy-6-methylcoumarin 13252-83-0
6-Chloroflavone 10420-73-2
6-Chloro-7-methylflavone 147919-60-6
d-(+)-Proline, 99+% 344-25-2
6-Chloro-4-hydroxycoumarin 19484-57-2
6-Bromochromone 51483-92-2
N,N-Dimethylbenzylamine, 99% 103-83-3
Phenylphosphinic acid, 97% (Titr.) 1779-48-2
3-Cyanochromone 50743-17-4
3-Cyano-4-methylcoumarin 24526-69-0
6-Chloro-3-formylchromone 42248-31-7
6,8-Dichloro-3-formylchromone 64481-10-3
6-Methylchromone-2-carboxylic acid 5006-44-0
Lead(II) chloride 7758-95-4
4-Hydroxybutyl vinyl ether, stabilized, 99% 17832-28-9
trans-3-Ethoxyacrylonitrile, 98% 58243-08-6
n-(Hydroxymethyl)phthalimide, 97% 118-29-6
3-(Trifluoromethyl)phenylhydrazine hydrochloride 3107-33-3
Diisobutylaluminium hydride, 1.1M solution in cyclohexane 110-82-7
Iron(III) ammonium citrate 1185-57-5
Tri-n-octylaluminium, 0.3M solution in heptane 142-82-5
Lithium tri-tert-butoxyaluminohydride, 1.1M solution in THF 109-99-9
Indole-4-carboxaldehyde 1074-86-8
(4-Methoxyphenyl)phenyliodonium triflate 115298-63-0
Bis(4-tert-butylphenyl)iodonium triflate 84563-54-2
2,3-Dibromo-3-phenylpropiophenone, 98% 611-91-6
(2e,5e)-2,5-bis[(4-(diethylamino)phenyl)methylene]cyclopentanone 261360-66-1
Tris(2-methyl-4-diethylaminophenyl)methane 4482-70-6
2-Nitrophenylarsonic acid 5410-29-7
4-Phenoxyphenyl isocyanate, 98% 59377-19-4
Iron (III) Ammonium Sulfate Dodecahydrate 7783-83-7
2,6-Dimethylphenyl isothiocyanate, 98% 19241-16-8
Iron (II) Ammonium Sulfate Hexahydrate 7783-85-9
3-Methoxyphenyl isothiocyanate, 98% 3125-64-2

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net