Search   
MSDS 
:
 4-(Bromomethyl)tetrahydropyran
CAS 
:
 125552-89-8
SYNONYMS 
:
 None Known.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 125552-89-8 |4-(Bromomethyl)tetrahydropyran | 97+% | unlisted |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: C
Risk Phrases: 34

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Causes burns.

Potential Health Effects
Eye:
Causes eye burns.
Skin:
Causes skin burns.
Ingestion:
Causes gastrointestinal tract burns.
Inhalation:
Causes chemical burns to the respiratory tract.
Chronic:
Chronic exposure may cause effects similar to those of acute
exposure.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid
immediately. Do NOT allow victim to rub eyes or keep eyes closed.
Skin:
Get medical aid immediately. Immediately flush skin with plenty of
water for at least 15 minutes while removing contaminated clothing
and shoes.
Ingestion:
If swallowed, do NOT induce vomiting. Get medical aid immediately.
If victim is fully conscious, give a cupful of water. Never give
anything by mouth to an unconscious person.
Inhalation:
Get medical aid immediately. Remove from exposure and move to fresh
air immediately. If breathing is difficult, give oxygen. Do NOT use
mouth-to-mouth resuscitation. If breathing has ceased apply
artificial respiration using oxygen and a suitable mechanical device
such as a bag and a mask.
Notes to Physician:
Treat symptomatically and supportively.

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion.
Extinguishing Media:
Use foam, dry chemical, or carbon dioxide.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Avoid runoff into storm sewers and
ditches which lead to waterways. Clean up spills immediately,
observing precautions in the Protective Equipment section. Provide
ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Do not breathe dust, vapor, mist, or gas. Do not get in eyes, on
skin, or on clothing. Keep container tightly closed. Do not ingest or
inhale. Use only in a chemical fume hood. Discard contaminated shoes.
Storage:
Store in a cool, dry place. Store in a tightly closed container.
Corrosives area.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 125552-89-8:


Personal Protective Equipment

Eyes:
Wear chemical splash goggles and face shield.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Oil
Color: Colourless
Odor: Without to slight
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 88 - 90 deg C @22mm Hg
Freezing/Melting Point: Not available.
Autoignition Temperature: Not available.
Flash Point: Not available.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density:
Molecular Formula: C6H11BrO
Molecular Weight: 179.06

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials.
Incompatibilities with Other Materials:
Strong acids, strong bases, strong oxidizing agents, strong reducing
agents.
Hazardous Decomposition Products:
Carbon monoxide, carbon dioxide, hydrogen bromide, bromine.
Hazardous Polymerization: Has not been reported

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 125552-89-8 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
4-(Bromomethyl)tetrahydropyran -
Not listed by ACGIH, IARC, or NTP.

**** SECTION 12 - ECOLOGICAL INFORMATION ****

Ecotoxicity:
Fish: Pseudomonas putida:

**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: CORROSIVE LIQUID, ACIDIC, ORGANIC, N.O.S
Hazard Class: 8
UN Number: 3265
Packing Group: III
IMO
Shipping Name: CORROSIVE LIQUID, ACIDIC, ORGANIC, N.O.S
Hazard Class: 8
UN Number: 3265
Packing Group: III
RID/ADR
Shipping Name: CORROSIVE LIQUID, ACIDIC, ORGANIC, N.O.S
Hazard Class: 8
UN Number: 3265
Packing group: III

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: C
Risk Phrases:
R 34 Causes burns.
Safety Phrases:
S 23 Do not inhale gas/fumes/vapour/spray.
S 26 In case of contact with eyes, rinse immediately
with plenty of water and seek medical advice.
S 36/37/39 Wear suitable protective clothing, gloves
and eye/face protection.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 125552-89-8: No information available.
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 125552-89-8 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 125552-89-8 is not listed on the TSCA inventory.
It is for research and development use only.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 3/23/2005 Revision #1 Date: 4/19/2005

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
2,4-Difluorobenzene-1-carbothioamide 175276-92-3
3-[3-(Chloromethyl)-1,2,4-oxadiazol-5-yl]-2-(methylthio)pyridine 252914-65-1
N1-3-(Pyridylmethyl)acetamide 22977-34-0
1-(Bromomethyl)-3-phenoxybenzene 51632-16-7
2,3-Dichlorobenzene-1-carbothioamide 84863-83-2
1,3-Thiazole-2-carbonyl chloride 30216-57-0
4-Morpholinophenylboronic acid 186498-02-2
Glycine 56-40-6
5-(2-Phenylethynyl)nicotinonitrile 0-01-1
N'-Hydroxy-2-(2-thieny)ethanimidamide 59174-12-8
N'-Hydroxy-4-methoxybenzenecarboximidamide 5373-87-5
3-Fluoro-N'-hydroxy-4-methylbenzenecarboximidamide 238742-80-8
Glycogen 9005-79-2
1-(1-Benzothiophen-2-yl)-2-bromo-1-ethanone 97511-06-3
4-(Bromomethyl)tetrahydropyran 125552-89-8
tert-Butyl 4-(3-iodobenzyl)tetrahydro-1(2H)-pyrazinecarboxylate
4-Aminomethyltetrahydropyran 130290-79-8
6-(Bromomethyl)-2-methylquinoline 141848-60-4
4-Prop-2-ynyl-thiomorpholine 1,1-dioxide 10442-03-2
2-Fluorosulfonylbenzenesulfonyl Chloride, 98% 30672-70-9
2-(4-Methylpiperazino)benzaldehyde 85803-62-9
2-(4-Pyridyl)-1,3-thiazole-4-carboxylic acid 21278-86-4
5-(4-Chlorophenyl)-2-methyl-3-furoic acid 111787-89-4
1-Fluoro-4-iodobenzene, 99% 352-34-1
2-(Diethylamino)-N-(2,6-Dimethylphenyl)- Acetamide, 97.5% (HPLC) 137-58-6
5-(4-Bromophenyl)-2-(trifluoromethyl)-3-furoic acid 229957-02-2
03407346xazol-5-yl)benzenesulfonyl chloride 499770-75-1
2-Hydrazinoquinoxaline 61645-34-9
N-epsilon-Methyl-L-lysine hydrochloride, 98% 7622-29-9
Gold Trichloride Trihydrate 16903-35-8
4-Phenylurazole, 98+% 15988-11-1
1-(2-Bromoethoxy)-2,4-dichlorobenzene 6954-77-4
Phthalic anhydride, p.a. 85-44-9
1-(2-Bromoethoxy)-2-fluorobenzene 193220-21-2
1-(3-Bromopropoxy)-2-fluorobenzene 145943-76-6
1-(3-Bromopropoxy)-4-fluorobenzene 1129-78-8
1-(4-Bromobutoxy)-4-fluorobenzene 2033-80-9
3,4-Diamino-5-hydroxypyrazole sulfate 52057-97-3
Methyl-16-doxyl-stearate, free radical 59719-53-8
4'-Benzyloxypropiophenone, 99% 4495-66-3
Graphite Powder 7782-42-5
Rhodamine 6g 989-38-8
2-Methylimidazo[1,2-a]pyridine-3-carboxylic acid 21801-79-6
Diethyl Chlorophosphite, Tech. 589-57-1
4-Phenyl-5-(trifluoromethyl)thiophen-3-amine 256427-77-7
N'-Hydroxypyridine-2-carboximidamide 1772-01-6
4-Phenyl-5-(trifluoromethyl)thiophene-2-carboxylic acid 208108-76-3
3-Amino-4-phenyl-5-(trifluoromethyl)thiophene-2-carboxylic acid 0-00-0
6-(Bromomethyl)-1,1,4,4-tetramethyl-1,2,3,4-tetrahydronaphthalene 119435-90-4
Guanidine hydrochloride 50-01-1

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net