Search   
MSDS 
:
 tert-Butyl 4-(3-iodobenzyl)tetrahydro-1(2H)-pyrazinecarboxylate
CAS 
:
 
SYNONYMS 
:
 
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| |Triphenylphosphine resin | 97+% | unlisted |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: C
Risk Phrases: 22 34

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Harmful if swallowed. Causes burns.

Potential Health Effects
Eye:
Causes eye burns.
Skin:
Causes skin burns.
Ingestion:
Harmful if swallowed. Causes gastrointestinal tract burns.
Inhalation:
Causes chemical burns to the respiratory tract.
Chronic:
Not available.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid
immediately.
Skin:
Get medical aid immediately. Immediately flush skin with plenty of
water for at least 15 minutes while removing contaminated clothing
and shoes.
Ingestion:
Do not induce vomiting. Get medical aid immediately.
Inhalation:
Get medical aid immediately. Remove from exposure and move to fresh
air immediately. If not breathing, give artificial respiration. If
breathing is difficult, give oxygen.
Notes to Physician:
Treat symptomatically and supportively.

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear.
Extinguishing Media:
Use foam, dry chemical, or carbon dioxide.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Do not breathe dust, vapor, mist, or gas. Do not get in eyes, on
skin, or on clothing. Use only in a chemical fume hood.
Storage:
Store in a cool, dry place. Store in a tightly closed container.
Corrosives area.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# :
United Kingdom, WEL - TWA: (listed as tellurium): 0.1 mg/m3 TWA
United Kingdom, WEL - STEL: (listed as tellurium): 0.3 mg/m3 STEL
United States OSHA: 0.1 mg/m3 TWA (listed under Tellurium).
Belgium - TWA: (listed as tellurium): 0.1 mg/m3 VLE
France - VME: (listed as tellurium): 0.1 mg/m3 VME
Germany: (listed as tellurium): 0.1 mg/m3 VME
Malaysia: (listed as tellurium): 0.1 mg/m3 TWA
Netherlands: (listed as tellurium): 0.1 mg/m3 MAC
Russia: (listed as tellurium): 0.01 mg/m3 TWA
Spain: (listed as tellurium): 0.1 mg/m3 VLA-ED

Personal Protective Equipment

Eyes:
Not available.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Solid
Color: Not available.
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: Not available.
Autoignition Temperature: Not available.
Flash Point: Not available.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density:
Molecular Formula: C16H23IN2O2
Molecular Weight: 402.28

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials.
Incompatibilities with Other Materials:
Strong oxidizing agents.
Hazardous Decomposition Products:
Carbon monoxide, oxides of nitrogen, carbon dioxide, iodine, iodide.
Hazardous Polymerization: Has not been reported

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
Triphenylphosphine resin -
Not listed by ACGIH, IARC, or NTP.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: AMINES, SOLID, CORROSIVE, N.O.S.*
Hazard Class: 8
UN Number: 3259
Packing Group: III
IMO
Shipping Name: AMINES, SOLID, CORROSIVE, N.O.S.
Hazard Class: 8
UN Number: 3259
Packing Group: III
RID/ADR
Shipping Name: AMINES, SOLID, CORROSIVE, N.O.S.
Hazard Class: 8
UN Number: 3259
Packing group: III

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: C
Risk Phrases:
R 22 Harmful if swallowed.
R 34 Causes burns.
Safety Phrases:
S 23 Do not inhale gas/fumes/vapour/spray.
S 26 In case of contact with eyes, rinse immediately
with plenty of water and seek medical advice.
S 36/37/39 Wear suitable protective clothing, gloves
and eye/face protection.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# : No information available.
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# is not listed on the TSCA inventory.
It is for research and development use only.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 3/23/2005 Revision #0 Date: Original.

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
2,4-Difluorobenzene-1-carbothioamide 175276-92-3
3-[3-(Chloromethyl)-1,2,4-oxadiazol-5-yl]-2-(methylthio)pyridine 252914-65-1
N1-3-(Pyridylmethyl)acetamide 22977-34-0
1-(Bromomethyl)-3-phenoxybenzene 51632-16-7
2,3-Dichlorobenzene-1-carbothioamide 84863-83-2
1,3-Thiazole-2-carbonyl chloride 30216-57-0
4-Morpholinophenylboronic acid 186498-02-2
Glycine 56-40-6
5-(2-Phenylethynyl)nicotinonitrile 0-01-1
N'-Hydroxy-2-(2-thieny)ethanimidamide 59174-12-8
N'-Hydroxy-4-methoxybenzenecarboximidamide 5373-87-5
3-Fluoro-N'-hydroxy-4-methylbenzenecarboximidamide 238742-80-8
Glycogen 9005-79-2
1-(1-Benzothiophen-2-yl)-2-bromo-1-ethanone 97511-06-3
4-(Bromomethyl)tetrahydropyran 125552-89-8
tert-Butyl 4-(3-iodobenzyl)tetrahydro-1(2H)-pyrazinecarboxylate
4-Aminomethyltetrahydropyran 130290-79-8
6-(Bromomethyl)-2-methylquinoline 141848-60-4
4-Prop-2-ynyl-thiomorpholine 1,1-dioxide 10442-03-2
2-Fluorosulfonylbenzenesulfonyl Chloride, 98% 30672-70-9
2-(4-Methylpiperazino)benzaldehyde 85803-62-9
2-(4-Pyridyl)-1,3-thiazole-4-carboxylic acid 21278-86-4
5-(4-Chlorophenyl)-2-methyl-3-furoic acid 111787-89-4
1-Fluoro-4-iodobenzene, 99% 352-34-1
2-(Diethylamino)-N-(2,6-Dimethylphenyl)- Acetamide, 97.5% (HPLC) 137-58-6
5-(4-Bromophenyl)-2-(trifluoromethyl)-3-furoic acid 229957-02-2
03407346xazol-5-yl)benzenesulfonyl chloride 499770-75-1
2-Hydrazinoquinoxaline 61645-34-9
N-epsilon-Methyl-L-lysine hydrochloride, 98% 7622-29-9
Gold Trichloride Trihydrate 16903-35-8
4-Phenylurazole, 98+% 15988-11-1
1-(2-Bromoethoxy)-2,4-dichlorobenzene 6954-77-4
Phthalic anhydride, p.a. 85-44-9
1-(2-Bromoethoxy)-2-fluorobenzene 193220-21-2
1-(3-Bromopropoxy)-2-fluorobenzene 145943-76-6
1-(3-Bromopropoxy)-4-fluorobenzene 1129-78-8
1-(4-Bromobutoxy)-4-fluorobenzene 2033-80-9
3,4-Diamino-5-hydroxypyrazole sulfate 52057-97-3
Methyl-16-doxyl-stearate, free radical 59719-53-8
4'-Benzyloxypropiophenone, 99% 4495-66-3
Graphite Powder 7782-42-5
Rhodamine 6g 989-38-8
2-Methylimidazo[1,2-a]pyridine-3-carboxylic acid 21801-79-6
Diethyl Chlorophosphite, Tech. 589-57-1
4-Phenyl-5-(trifluoromethyl)thiophen-3-amine 256427-77-7
N'-Hydroxypyridine-2-carboximidamide 1772-01-6
4-Phenyl-5-(trifluoromethyl)thiophene-2-carboxylic acid 208108-76-3
3-Amino-4-phenyl-5-(trifluoromethyl)thiophene-2-carboxylic acid 0-00-0
6-(Bromomethyl)-1,1,4,4-tetramethyl-1,2,3,4-tetrahydronaphthalene 119435-90-4
Guanidine hydrochloride 50-01-1

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net