Search   
MSDS 
:
 Methyl 10-chloro-10-oxodecanoate
CAS 
:
 14065-32-8
SYNONYMS 
:
 Sebacinic acid monomethylester monochloride; Methyl sebacoyl chloride
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 14065-32-8 |Methyl 10-chloro-10-oxodecanoate | | unlisted |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: C
Risk Phrases: 34

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Causes burns.Moisture sensitive.Air sensitive.

Potential Health Effects
Eye:
Causes eye burns.
Skin:
Causes skin burns.
Ingestion:
Causes gastrointestinal tract burns.
Inhalation:
Causes chemical burns to the respiratory tract.
Chronic:
Not available.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid
immediately.
Skin:
Get medical aid immediately. Immediately flush skin with plenty of
water for at least 15 minutes while removing contaminated clothing
and shoes.
Ingestion:
Do not induce vomiting. Get medical aid immediately.
Inhalation:
Get medical aid immediately. Remove from exposure and move to fresh
air immediately. If not breathing, give artificial respiration. If
breathing is difficult, give oxygen.
Notes to Physician:
Treat symptomatically and supportively.

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear.
Extinguishing Media:
Use foam, dry chemical, or carbon dioxide. DO NOT USE WATER!

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Do not breathe dust, vapor, mist, or gas. Do not get in eyes, on
skin, or on clothing. Use only in a chemical fume hood.
Storage:
Store in a cool, dry place. Store in a tightly closed container.
Corrosives area. Store protected from moisture. Store under nitrogen.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 14065-32-8:


Personal Protective Equipment

Eyes:
Not available.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Liquid
Color: colorless to pale yellow
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 159 deg C
Freezing/Melting Point: Not available.
Autoignition Temperature: Not available.
Flash Point: 71 deg C ( 159.80 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density: 1.052
Molecular Formula: C11H19ClO3
Molecular Weight: 234.72

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Not available.
Conditions to Avoid:
Incompatible materials, exposure to air, exposure to moist air or
water.
Incompatibilities with Other Materials:
Strong oxidizing agents, water, strong bases, alcohols, air.
Hazardous Decomposition Products:
Hydrogen chloride, carbon monoxide, carbon dioxide.
Hazardous Polymerization: Has not been reported

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 14065-32-8 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
Methyl 10-chloro-10-oxodecanoate -
Not listed by ACGIH, IARC, or NTP.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: CORROSIVE LIQUID, ACIDIC, ORGANIC, N.O.S.*
Hazard Class: 8
UN Number: 3265
Packing Group: II
IMO
Shipping Name: CORROSIVE LIQUID, ACIDIC, ORGANIC, N.O.S.
Hazard Class: 8
UN Number: 3265
Packing Group: II
RID/ADR
Shipping Name: CORROSIVE LIQUID, ACIDIC, ORGANIC, N.O.S.
Hazard Class: 8
UN Number: 3265
Packing group: II

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: C
Risk Phrases:
R 34 Causes burns.
Safety Phrases:
S 26 In case of contact with eyes, rinse immediately
with plenty of water and seek medical advice.
S 36/37/39 Wear suitable protective clothing, gloves
and eye/face protection.
WGK (Water Danger/Protection)
CAS# 14065-32-8: No information available.
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 14065-32-8 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 14065-32-8 is not listed on the TSCA inventory.
It is for research and development use only.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 6/10/2003 Revision #0 Date: Original.

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
3,5-Dichloro-4-pyridone-1-acetic acid 56187-37-2
Bis(4-methoxyphenyl)disulfide 5335-87-5
1-Benzyl-4-(4,4,5,5-tetramethyl-1,3,2-diox aborolan-2-yl)-1H-pyrazole 00-01-1
3-Biphenylcarboxylic acid 716-76-7
5-(4,4,5,5-Tetramethyl-1,3,2-dioxaborolan- 2-yl)-1H-indole 269410-24-4
1-Methyl-4-iodo-1H-pyrazole 39806-90-1
L-alpha-Cyclohexylglycine 14328-51-9
D-alpha-Cyclohexylglycine 14328-52-0
Isopropylboronic acid 80041-89-0
n-Propylboronic acid 17745-45-8
Ethylboronic acid 4433-63-0
Bacitracin, Potency Min. 60 units/mg (On the Dry Substance) 1405-87-4
Bis(pyridine)iodonium tetrafluoroborate 15656-28-7
Methyl O,O'-bis(2,2,2-trifluoroethyl)phosphonoacetate 88738-78-7
Platinum(II) acetylacetonate 15170-57-7
Ethylenebis(triphenylphosphine)platinum(0) 12120-15-9
Chlorobis(cyclooctene)rhodium(I), dimer 12279-09-3
Chlorobis(cyclooctene)iridium(I), dimer 12246-51-4
trans-Benzyl(chloro)bis(triphenylphosphine )palladium(II) 22784-59-4
Hexaammineruthenium(II) chloride 15305-72-3
Ruthenium(III) acetylacetonate 14284-93-6
Benzeneruthenium(II) chloride, dimer 37366-09-9
cis-Bis(2,2'-bipyridine)dichlororuthenium(II) hydrate 98014-14-3
3-Oxabicyclo[3.1.0]hexane-2,4-dione 5617-74-3
Ethyl trans-4-bromocinnamate 24393-53-1
1-(4-Methylphenyl)piperazine 39593-08-3
Phenyltrimethoxysilane 2996-92-1
5-Bromo-N-(carboxymethyl)anthranilic acid 32253-75-1
Copper(I) trifluoromethanesulfonate benzene complex 42152-46-5
Dihydridotetrakis(triphenylphosphine)ruthenium(II) 19529-00-1
Methyl 1-cyclohexene-1-carboxylate 18448-47-0
2-Bromo-5-nitroanisole 77337-82-7
Isosorbide dimethyl ether 5306-85-4
2-Aminobenzenesulfonamide 3306-62-5
4-(4-Methoxyphenyl)butyric acid 4521-28-2
(S)-2-Amino-5-diethylaminopentane 67459-52-3
Ethyl 2,2-diethoxyacetate, 97% 6065-82-3
N-(3-Aminopropyl)pyrrolidine 23159-07-1
Piperonyloyl chloride 25054-53-9
1,3-Diaminocyclohexane, mixture of isomers 3385-21-5
(R)-2-Amino-5-diethylaminopentane 67459-50-1
Tris(dibenzylideneacetone)dipalladium-chloroform adduct 0-01-1
2-Chloro-N-methoxy-N-methylacetamide 67442-07-3
Methyl 10-chloro-10-oxodecanoate 14065-32-8
1,2,3,4-Tetrahydroisoquinoline-3-carboxylic acid, 97% 67123-97-1
1,3-Dimethyl-1H-pyrazol-5-amine, 97% 3524-32-1
6-Chloroimidazo[2,1-b][1,3]thiazole, 97% 23576-81-0
2-Amino-6,7-dimethyl-4-pteridinol, 97% 611-55-2
5-chloro-2-(methylthio)aniline 16423-54-4
2-chloro-6-(trifluoromethyl)pyridine, 97% 39890-95-4

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net