Search   
MSDS 
:
 1-Hexadecylamine, straight-chained C16, 90%
CAS 
:
 143-27-1
SYNONYMS 
:
 1-Aminohexadecane; Palmitylamine; 1-Hexadecanamine; 1-Hexadecylamine.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 143-27-1 |1-Hexadecanamine | 90 | 205-596-8 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: XI
Risk Phrases: 36/37/38

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Irritating to eyes, respiratory system and skin.

Potential Health Effects
Eye:
May cause severe eye irritation. Causes eye irritation.
Skin:
Causes skin irritation. Amines have been known to cause skin
irritation and sensitization. No skin absorption data found.
Ingestion:
May cause irritation of the digestive tract.
Inhalation:
Material has a low vapor pressure, so exposure to vapor is not
likely.
Chronic:
Not available.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
In case of contact, immediately flush eyes with plenty of water for
at least 15 minutes. Get medical aid immediately.
Skin:
In case of contact, immediately flush skin with plenty of water.
Remove contaminated clothing and shoes. Get medical aid. Wash
clothing before reuse.
Ingestion:
If swallowed, do not induce vomiting unless directed to do so by
medical personnel. Never give anything by mouth to an unconscious
person. Get medical aid.
Inhalation:
If inhaled, remove to fresh air. If not breathing, give artificial
respiration. If breathing is difficult, give oxygen. Get medical aid.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion.
Extinguishing Media:
In case of fire, use water, dry chemical, chemical foam, or
alcohol-resistant foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Avoid runoff into storm sewers and ditches which lead to waterways.
Clean up spills immediately, observing precautions in the Protective
Equipment section. Sweep up, then place into a suitable container for
disposal. Avoid generating dusty conditions. Provide ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Avoid contact with eyes, skin, and clothing. Keep
container tightly closed. Use with adequate ventilation. Avoid
breathing vapor.
Storage:
Keep container closed when not in use. Store in a cool, dry,
well-ventilated area away from incompatible substances.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 143-27-1:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
A respiratory protection program that meets OSHA's 29
CFR 1910.134 and ANSI Z88.2 requirements or European
Standard EN 149 must be followed whenever workplace
conditions warrant respirator use.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Solid
Color: white to pale yellow
Odor: fish-like
pH: Not available.
Vapor Pressure: .0001 mm Hg @ 25 deg C
Viscosity: Not available.
Boiling Point: 330 deg C @ 760mmHg
Freezing/Melting Point: 38-47 deg C
Autoignition Temperature: Not available.
Flash Point: 140 deg C ( 284.00 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water: Insoluble.
Specific Gravity/Density:
Molecular Formula: C16H35N
Molecular Weight: 241.46

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Dust generation, excess heat.
Incompatibilities with Other Materials:
Strong acids, strong oxidizing agents, aluminum.
Hazardous Decomposition Products:
Nitrogen oxides, carbon monoxide, irritating and toxic fumes and
gases, carbon dioxide.
Hazardous Polymerization: Will not occur.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 143-27-1: ML9100000
LD50/LC50:
Not available.
Carcinogenicity:
1-Hexadecanamine -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: Amines, Solid, Corrosive, N.O.S.
Hazard Class: 8
UN Number: 3259
Packing Group: III
IMO
Shipping Name: Amines, Solid, Corrosive, N.O.S.
Hazard Class: 8
UN Number: 3259
Packing Group: III
RID/ADR
Shipping Name: Amines, Solid, Corrosive, N.O.S.
Hazard Class: 8
UN Number: 3259
Packing group: III

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XI
Risk Phrases:
R 36/37/38 Irritating to eyes, respiratory system
and skin.
Safety Phrases:
S 24/25 Avoid contact with skin and eyes.
WGK (Water Danger/Protection)
CAS# 143-27-1: No information available.
Canada
CAS# 143-27-1 is listed on Canada's DSL List.
CAS# 143-27-1 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 143-27-1 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 12/28/1998 Revision #2 Date: 5/16/2002

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
(1R,3S)-2,2-Dimethyl-3-(2-oxopropyl)-cyclopropaneacetonitrile, 99% 110847-02-4
Alpha, Alpha, Alpha-Trifluoro-O-Tolunitrile, 98% 447-60-9
3',6'-Dichlorofluoran, 92% (uv-vis) 630-88-6
2,2-Dimethyl-4-Phenyl-2H-Imidazole-1-Oxide, 99+% 0-00-1
n-Propyl isocyanate, 99% 110-78-1
Uniblue A Sodium Salt, 98% (UV-VIS) 14541-90-3
9H-Fluorene-9-Carboxylic Acid, 97% 1989-33-9
tert-Butyl chloroacetate, 99+% (gc) 107-58-4
Acid Red 183 6408-31-7
3,5-Dichloro-1,2,4-Thiadiazole 2254-88-8
Thymolphthalein Complexon 62698-55-9
1,2,4-Benzenetricarboxylic acid, 99+% 528-44-9
MTT, 98% 298-93-1
o-Benzaldehydesulfonic acid sodium salt, 90% (titr.) 1008-72-6
2,4-Dinitrobenzoic Acid, 99% (Titr.) 610-30-0
Cinnamoyl chloride, 99+% (Titr.) 102-92-1
Iodine Monochloride, Reagent ACS 7790-99-0
1-Adamantyl Isothiocyanate, 99% 4411-26-1
3,3-Dimethyl-1-Butyne, 98% 917-92-0
Diethyl Dithiophosphate, Ammonium Salt, 95% 1068-22-0
Allyl phenyl ether, 99+% (GC) 1746-13-0
Benzyl Salicylate, 98+% 118-55-8
Ethyl succinyl chloride, 98% 14794-31-1
Molecular sieves, 5a, 8 to 12 mesh 1332-58-7
Coumarin 138, Laser Grade, 99% (UV-Vis) 62669-74-3
N,N-Diethylethanolamine, P.A. 100-37-8
(R)-(+)-N,N-Dimethyl-1-phenethylamine, 99+% 19342-01-9
Lithium Perchlorate, Reagent ACS 7791-03-9
Alpha,alpha-dicyclopropyl-4-methylbenzenem ethanol, 96% 71172-47-9
Butane, 1,1'-sulfonylbis-, 99+% 598-04-9
(R)-(-)-2,2-Dimethyl-1,3-dioxolane-4- methanol, 98% 14347-78-5
5-Methoxy-2-methylindole, 99+% 1076-74-0
Phenylethyl isothiocyanate, 96% 2257-09-2
Poly(1,4-butylene adipate) 25103-87-1
Lithocholic acid, 98% 434-13-9
2-Methylnaphth(1,2-D)Oxazole, 98% (GC) 85-15-4
Cholesteryl stearate, 96% 35602-69-8
N,N-Dimethyl-P-Phenylenediamine Sulfate 99% (Titr.) 6219-73-4
ETHYL SORBATE, 99% 2396-84-1
Ethyl n-Piperazinecarboxylate, 99% 120-43-4
(6,6,7,7,8,8,8-Heptafluoro-2,2-dimethyl -3,5-octanedionato)silver, 76121-99-8
Bisphenol A Dimethacrylate 3253-39-2
3-Acetyl-2,4-dimethylpyrrole 2386-25-6
Ethyl 2-Methylbutyrate, 99% 7452-79-1
4-Octylbenzoyl chloride, 99% (titr.) 50606-97-8
2,6-Dichloro-3-(Trifluoromethyl)pyridine, 97% 55304-75-1
N-(4-Vinylbenzyl)-N,N-Dimethylamine, Stabilized with 0.1% 2245-52-5
2,4-Pentanediol, 99%, (mixture of isomers) 625-69-4
1-Hexadecylamine, straight-chained C16, 90% 143-27-1
1-Chloro-4-fluorobenzene, 98% 352-33-0

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net